Axis Communications network camera user manual Audio Settings, Audio Modes, Audio Input

Page 25

AXIS P3364-VE Network Camera

Video and Audio

5. If more adjustments are needed, go to the Advanced tab.

Note

•Changing the zoom level moves the focus position. Focus should always be adjusted after changing the zoom.

•Movements in front of the camera should be avoided during automatic focusing.

On the Advanced tab, focus can be adjusted manually:

1.Click Open iris to open the iris to its maximum position. This gives the smallest depth of field and provides the best conditions for focusing.

2.Focus is set in the Focus window. Use the mouse to move and resize the focus window.

3.Click in the Focus position bar to focus on a desired location. The buttons < and > move the focus position one step in either direction. The buttons << and >> move the focus position in multiple steps in either direction.

4.When satisfied, click Enable iris to enable the iris.

The Pixel counter shows the number of pixels in an area of the image and can be used to ensure that the size of the image fulfills certain requirements, for example for face recognition. Use the mouse to move and resize the pixel counter, or enter the number of pixels in the Width and Height fields and click Apply.

Audio Settings

The audio functionality for each video stream is enabled under Video & Audio > Video Stream > Audio.

Audio Modes

The Axis product supports the following audio modes:

Full duplex - Simultaneous two-way audio allowing the Axis product to transmit and receive audio at the same time. There is no echo cancellation; if feedback loops appear, try moving the microphone or the speaker.

Half-duplex - Audio can be transmitted to and from the Axis product but only in one direction at a time. To transmit audio using the Live View page, use the Talk and Listen buttons, see AMC Audio Controls, on page 13.

Simplex — speaker only - Audio is transmitted from a client to the Axis product and can be played by a speaker connected to the product. To transmit audio using the Live View page, the Talk and Microphone buttons must both be active, see AMC Audio Controls, on page 13.

Simplex — microphone only - Audio captured by the product microphone is transmitted from the Axis product to one or more clients.

To set the audio mode, go to Video & Audio > Audio Settings and select the desired mode from the Audio mode drop-down list.

Audio Input

An external microphone or a line source can be connected to the Audio-in connector. Configure the audio input settings under Video & Audio > Audio Settings.

Note

The internal microphone is used by default; the external microphone is used when connected. It is possible to disable the internal microphone by connecting a plug to the mic input.

Select Microphone to use an external microphone or Line to use a Line in device, e.g. an audio mixer for multiple microphones or a microphone with a built-in amplifier, as audio source.

The Microphone power option provides DC power for an external microphone. Microphone power should only be used with microphones that have no battery and when using the internal microphone. This setting should not be enabled when using a dynamic or battery powered microphone. Microphone power will not harm the microphone; if you are uncertain, try switching it off and on.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Axis P3364-VE Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis P3364-VE Network Camera Table of ContentsConnectors Performance Considerations Symptoms, Possible Causes and Remedial ActionsFor technical specifications, see Connectors and ButtonsHardware Overview Hardware OverviewLED Indicators Axis P3364-VE Network Camera Accessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariSet the Root Password Accessing the Product Access from the InternetClick Create self-signed certificate Live View Set Power Line FrequencyControls on the Live View Axis Media Control viewer toolbar Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls PTZ ControlsAxis P3364-VE Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream ImageClick Save to apply the new settings Resolution. Select the default resolutionStream Profiles 264Exposure Settings Camera SettingsImage Appearance White BalanceShutter & Gain Iris adjustmentSet Shutter to Low light priority slider toward low noiseDate/Time Formats in the online help To enable overlays To configure the view areaView Area OverlayFocus & Zoom Privacy MaskOverlay Image Go to Video & Audio Overlay ImageAudio Modes Audio SettingsAudio Input Audio Output Audio ClipsLive View Config Live View ConfigDefault Viewer for Browsers Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsAxis P3364-VE Network Camera Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomControls AdvancedGo to PTZ Guard Tour and click Add Detectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Applications Install ApplicationApplications Application LicensesAxis P3364-VE Network Camera Events EventsSystem Setting Up an Action RuleTime PTZ ControlSchedules RecipientsRecipient Use with action Go to Events Recipients and click AddGo to Events Recurrences and click Add RecurrencesRecordings RecordingsRecording List Continuous RecordingSystem Options System OptionsSecurity UsersIeee Date & TimeAudio Support CertificatesIPv4 Address Configuration Basic TCP/IP SettingsIPv6 Address Configuration NetworkLinux/Unix syntax Assign IP Address Using ARP/PingLinux/Unix example Axis Video Hosting System AvhsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourNetwork Share Ports & DevicesPorts Port StatusSupport System Options MaintenanceSupport Overview System OverviewPlain Config Reset to Factory Default SettingsScripting File UploadAxis P3364-VE Network Camera Troubleshooting TroubleshootingFirmware To upgrade the product’s firmware Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Troubleshooting Emergency Recovery ProcedureProblems setting the IP address Product cannot be accessed from a browserProblems with streaming H.264 Product is accessible locally but not externallyBasic Video and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsTechnical Specifications Technical SpecificationsInstallation Function/group Specifications Network SecurityMaintenance General Casing PowerConnectors Audio Input Audio Output Performance ConsiderationsAxis P3364-VE Network Camera M3.3
Top Page Image Contents