Axis Communications M3025-VE user manual Recordings, Recording List, Continuous Recording

Page 36

AXIS M3025–VE Network Camera

Recordings

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

•To start a continuous recording, see page 36.

•To set up action rules, see page 31.

•To access recordings, see Recording List on page 36.

•To configure camera controlled storage, see Storage on page 46.

Recording List

Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that triggered the recording.

To play or download a recording, follow these steps:

1.Go to Recordings > List.

2.Use the filter to narrow the list of recordings. Enter the desired filter criteria and click Filter. Some filters may take a long time to complete.

3.Select the recording.

4.Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded file is a zip file containing a minimum of three files, of which the Matroska (mkv) files are the actual recordings. The recordings are time-stamped with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click Properties.

To remove a recording, select the recording and click Remove.

Continuous Recording

The Axis product can be configured to continuously save video to a storage device. For information about storage devices, see Storage on page 46. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings.

If a new stream profile is selected while a recording is ongoing, the recording will be stopped and saved in the recording list and a new recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings.

To start a continuous recording, follow these steps:

1.Go to Recordings > Continuous.

2.Select Enabled.

3.Select the type of storage device from the Storage list.

4.Select a Stream profile to use for continuous recordings.

5.Click Save to save and start the recording.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Axis M3025-VE Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis M3025-VE Network CameraPerformance Considerations Connectors and Buttons Network ConnectorFor technical specifications, see RJ45 Ethernet connector with Power over Ethernet PoELED Indicators ConnectorSD Card Slot Control ButtonAccess the Product Access from a BrowserAccess from the Internet Set the Root PasswordSet Power Line Frequency Live ViewControls on the Live View Click Use HttpsGo to Setup Events Axis Media Control viewer toolbarPTZ Controls Manual TriggerAxis M3025-VE Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis M3025-VE Network Camera Set Up the Product Basic SetupClick Save to apply the new settings VideoVideo Stream Pixel CounterStream Profiles 264Camera Settings Exposure SettingsImage Appearance White BalanceView Area OverlayOverlay Image Go to Video Video Stream and select the Image tabUse Overlay Text in an Action Rule Go to Video Overlay ImageGo to Events Action Rules Click Add to create a new rulePrivacy Mask Configure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons For more information about I/O ports, see I/O Ports onPreset Positions PTZ Pan Tilt ZoomAdvanced Axis M3025-VE Network Camera Detectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAxis M3025-VE Network Camera Install Application Go to Setup ApplicationsApplications Application LicensesAxis M3025-VE Network Camera Set Up Action Rules EventsConvert Event Types to Action Rules Go to Events Action Rules and click AddInput Signal TriggersDetectors HardwareAdd Recipients ActionsRecipient Types Set Up Email Recipients Recipient Use with actionSet Up Recurrences Create SchedulesTo create a new schedule Go to Events Schedules and click AddRecordings Recording ListContinuous Recording Go to Recordings ListLanguages System Options SecurityUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Basic TCP/IP Settings Go to Setup System Options Security CertificatesDate & Time NetworkIPv4 Address Configuration IPv6 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 BonjourStorage SD CardMount and Unmount SD Card Format SD CardMaintenance Ports & DevicesNetwork Share PortsSupport Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigScripting File UploadAxis M3025-VE Network Camera Troubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, generalVideo Camera Settings Key framesProblem Retrieving Additional Video Streams Storage and disk management problemsStorage disruption Re-mount the storage deviceTechnical Specifications Function/group Specifications System Application PowerConnectors DimensionsConnectors Function/group Specifications IncludedConnector Function Pin SpecificationsPerformance Considerations M4.5
Related manuals
Manual 22 pages 30.55 Kb
Top Page Image Contents