Axis Communications M3011 user manual Stream Profiles, Camera Settings

AXIS M3011 - Video

Bit Rate Control

The bit rate can be set as Variable Bit Rate (VBR) or Constant Bit Rate (CBR).

VBR adjusts the bit rate according to the image complexity, using up bandwidth for increased activity in the image, and less for lower activity in the monitored area.

CBR allows you to set a fixed Target bit rate that consumes a predictable amount of bandwidth. As the bit rate would usually need to increase for increased image activity, but in this case cannot, the frame rate and image quality are affected negatively. To partly compensate for this, it is possible to prioritize either the frame rate or the image quality whenever the bit rate needs to be increased. Not setting a priority means the frame rate and image quality are equally affected.

Note:

To determine a reasonable bit rate, go to Setup > Video > Video Stream > Image, check the Include checkbox and enter the code #b in the Include text: field. The current bit rate will display as a text overlay on the Live View page. To view the image stream while configuring the GOV settings and Bit rate control, select Open... under Preview.

MJPEG

Sometimes the image size is large due to low light or complex scenery. Adjusting the maximum frame size helps to control the bandwidth and storage used by the Motion JPEG video stream in these situations. Defining the frame size as Unlimited provides consistently good image quality at the expense of increased bandwidth and storage usage during low light. Limiting the frame size optimizes bandwidth and storage usage, but may give poor image quality. To prevent increased bandwidth and storage usage, the maximum frame size should be set to an optimal value.

Stream Profiles

There are four pre-programmed stream profiles available for quick set-up. These settings can be adjusted and new customized profiles can be created. Each profile has a descriptive name, describing its usage and/or purpose. The profiles can be accessed from the Live View page.

•To add a new stream profile, click Add to bring up the Stream Profile Settings dialog.

•Choose a descriptive name and enter a description for your profile.

•Choose the form of Video encoding you wish to use from the drop-down list:

•H.264 - Also known as MPEG-4 Part 10. This is the new generation compression standard for digital video. This function offers higher video resolution than Motion JPEG or MPEG-4 at the same bit rate and bandwidth, or the same quality video at a lower bit rate.

•MPEG-4 part 2 -A video compression standard for digital video.

•Motion JPEG - Delivers a high quality video stream, from which individual images can be extracted and saved.

•Copy an existing stream profile to your system and rename the copy

•Modify an existing stream profile based on the light situation and motion to be captured by your camera. See Stream Profile Settings for more information.

•Highlight the stream profile you wish to remove, then click Remove to remove it from the list.

Camera Settings

This page provides access to the advanced image settings for the AXIS M3011.

Image Appearance

Color level - Select an appropriate level by entering a value in the range 0-100. Lower values mean less color saturation, whilst the value 100 gives maximum color saturation.

Brightness - Image brightness can be adjusted in the range 0-100, where a higher value produces a brighter image.

Sharpness - Controls the amount of sharpening applied to the image. A sharper image might increase image noise especially in low light conditions. A lower setting reduces image noise, but the image would be less sharp.

Contrast - Adjust the contrast of the image by raising or lowering the value in this field.

Rotate image - The image can be rotated to the correct orientation. Select the appropriate value from the drop-down list.

15