Axis Communications user manual Axis M3011 System Options

Page 27

AXIS M3011 - System Options

Enable AVHS - AXIS Video Hosting System (AVHS) in conjunction with an AVHS service provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider please go to www.axis.com. If AVHS is not to be used this option can be disabled.

•One-click enabled - Press the camera’s control button (see Hardware Overview, on page 5) until the status LED blinks green to install the camera using an AVHS service. Once registered the camera stays connected to the AVHS service. If the camera is not registered within 24 hours after the button is pressed, the camera will disconnect from the AVHS service.

•Always - The camera will constantly attempt to connect to the AVHS service over the Internet. Once registered the camera will stay connected to the service. This option can be used when the camera is already installed and it is not convenient to use the one-click installation.

AXIS Internet Dynamic DNS Service - Use the AXIS Internet Dynamic DNS service to assign a host name for easy access to your network camera (requires Internet access).

Click Settings... to register the camera with the Axis Internet Dynamic DNS service, or to modify the existing settings (requires access to the Internet). The domain name currently registered at the Axis Internet Dynamic DNS service for your product can at any time be removed.

For more information, please refer to the online help .

27

Image 27

Contents Axis M3011 Network Camera Axis M3011 User’s Manual Contents Key features Axis M3011Axis M3011 Camera arrow Springs LED indicators OverviewCeiling Color Indication LED indicatorsAccessing the Camera Access from a browserAxis M3011 Accessing the Camera Access from the internet Setting the root passwordClick the Create self-signed certificate button Setting the root password over a secure connectionLens adjustments Axis M3011 Lens adjustmentsFocus Live View General controlsAxis Media Control toolbar How to stream MPEG-4/H.264 Video StreamsAxis M3011 Video Streams Alternative methods of accessing the video stream Motion JpegAxis M3011 Video Streams Axis Media Control AMC Image VideoVideo Stream Axis M3011 VideoStream Profiles Camera SettingsPrivacy mask Overlay ImageLive View Config Axis M3011 Live View ConfigLayout Viewer Settings Axis M3011 Events EventsEvent Servers Event TypesHelp How to set up a triggered eventAxis M3011 Events Triggered Event Pre-trigger and Post-trigger buffersCamera Tampering Configuration exampleSettings Scheduled EventMotion Detection Click Motion Detection in the Events menu Configuring Motion DetectionUsers System OptionsSecurity Axis M3011 System OptionsDate & Time Network Basic TCP/IP SettingsAxis M3011 System Options Broadband Natisp router Advanced TCP/IP SettingsAs the Internet. See the online help for more information QoS Quality of ServiceTraps for Snmp v1/v2 Smtp emailUPnP Snmp v1/v2Maintenance SupportBonjour System Log Provides information about system events AboutAxis M3011 System Options Logs & Reports AdvancedUsing the Control Button Resetting to Factory Default SettingsChecking the Firmware TroubleshootingAxis M3011 Troubleshooting Emergency Recovery ProcedureAxis M3011 Troubleshooting Axis Support Router to allow access to the camera Network administrator to obtain an appropriate IP addressMust obtain a new IP address and reinstall the unit ARP/Ping commandsNot set to Decode only I frames Axis M3011 Technical Specifications Technical SpecificationsVideo access from Function/group Specification System ApplicationAlarm triggers Alarm eventsGeneral performance considerations Axis M3011 Glossary of Terms Glossary of TermsHalf-duplex See Full-duplex Etrax Ethernet Token Ring Axis Axis own microprocessorVOP See VOP Axis M3011 Glossary of Terms URL Uniform Resource Locator An address on the network Action Buttons 11 Administrator Alarm 26 Axis M3011 IndexARP/Ping Bit Rate Bonjour Buffer Size Buffers