Axis Communications Security, Axis M3011 System Options, Users, IP Address Filter

Page 24

AXIS M3011 - System Options

System Options

Security

Users

User access control is enabled by default. An administrator can set up other users, by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page, as described below:

The user list displays the authorized users and user groups (levels):

Viewer

Provides the lowest level of access, which only allows access to the Live View page.

 

 

Operator

An operator can view the Live View page, create and modify events, and adjust certain other

 

settings. Operators have no access to System Options.

 

 

Administrator

An administrator has unrestricted access to all menus for configuration and can determine the

 

registration of all other users.

 

 

HTTP/RTSP Password Settings - Select the type of password. You may need to allow unencrypted passwords if there are viewing clients that do not support encryption, or if you recently upgraded the firmware and the existing clients support encryption, but need to log in again, and be configured to use this functionality.

User Settings - Check the relevant box to enable anonymous viewer login - allows any viewer direct access to the Live View page.

Enable Basic Setup - Before using the AXIS M3011 Network Camera, there are certain settings that should be made, most of which require Administrator access privileges. To quickly access these settings use the Basic Setup in the menu. All settings are also available from the standard setup links in the menu. Basic Setup is enabled by default but can be disabled and removed from the menu.

IP Address Filter

Enable IP Address Filtering to allow or deny access to the network cameras. Once enabled, the IP addresses in the list are allowed or denied access according to the choice made in the drop-down list Allow/Deny the following IP addresses.

The administrator can add up to 256 IP address entries to the list (a single entry can contain multiple IP addresses). The users from these IP addresses need to be specified in the user list with the appropriate access rights. This is done from Setup > System Options > Security > Users.

HTTPS

The network cameras support encrypted browsing using HTTPS.

A self-signed certificate can be used until a Certificate Authority-issued certificate has been obtained. Click the Create self-signed Certificate button to install a self-signed certificate. Although self-signed certificates are free and offer some protection, true security is only implemented after the installation of a signed certificate issued by a certificate authority.

A signed certificate can be obtained from an issuing Certificate Authority by clicking the Create Certificate Request button. When the signed certificate is returned, click the Install signed certificate button to import the certificate. The properties of any certificate request currently resident in the camera or installed can also be viewed by clicking the Properties... button. The HTTPS Connection Policy must also be set in the drop-down lists to enable HTTPS in the camera.

For more information, please refer to the online help .

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Axis M3011 Network Camera Axis M3011 User’s Manual Contents Key features Axis M3011Axis M3011 Camera arrow Springs LED indicators OverviewCeiling LED indicators Color IndicationAccessing the Camera Access from a browserAxis M3011 Accessing the Camera Setting the root password Access from the internetSetting the root password over a secure connection Click the Create self-signed certificate buttonLens adjustments Axis M3011 Lens adjustmentsFocus Live View General controlsAxis Media Control toolbar How to stream MPEG-4/H.264 Video StreamsAxis M3011 Video Streams Alternative methods of accessing the video stream Motion JpegAxis M3011 Video Streams Axis Media Control AMC Video Video StreamAxis M3011 Video ImageCamera Settings Stream ProfilesOverlay Image Privacy maskLive View Config Axis M3011 Live View ConfigLayout Viewer Settings Events Event ServersEvent Types Axis M3011 EventsHow to set up a triggered event Axis M3011 Events Triggered EventPre-trigger and Post-trigger buffers Help Configuration example Settings Scheduled Event Camera TamperingMotion Detection Configuring Motion Detection Click Motion Detection in the Events menuSystem Options SecurityAxis M3011 System Options UsersDate & Time Basic TCP/IP Settings NetworkAxis M3011 System Options Advanced TCP/IP Settings Broadband Natisp routerQoS Quality of Service As the Internet. See the online help for more informationSmtp email UPnPSnmp v1/v2 Traps for Snmp v1/v2Maintenance SupportBonjour About Axis M3011 System Options Logs & ReportsAdvanced System Log Provides information about system eventsResetting to Factory Default Settings Using the Control ButtonTroubleshooting Axis M3011 TroubleshootingEmergency Recovery Procedure Checking the FirmwareAxis M3011 Troubleshooting Axis Support Network administrator to obtain an appropriate IP address Must obtain a new IP address and reinstall the unitARP/Ping commands Router to allow access to the cameraNot set to Decode only I frames Technical Specifications Axis M3011 Technical SpecificationsFunction/group Specification System Application Alarm triggersAlarm events Video access fromGeneral performance considerations Glossary of Terms Axis M3011 Glossary of TermsEtrax Ethernet Token Ring Axis Axis own microprocessor Half-duplex See Full-duplexVOP See VOP Axis M3011 Glossary of Terms URL Uniform Resource Locator An address on the network Action Buttons 11 Administrator Alarm 26 Axis M3011 IndexARP/Ping Bit Rate Bonjour Buffer Size Buffers
Top Page Image Contents