Axis Communications M1143-L user manual Find Recordings, Play Recording, Go to Recordings List

Page 36

AXIS M1143–L - User Manual

Recordings

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

•To start a continuous recording, see page 37.

•To set up action rules, see page 31.

•To configure camera controlled storage, see Storage on page 47.

Find Recordings

Recordings stored on the SD card or network share can be accessed from the Recordings > List page. The page lists all recordings on the storage device and shows each recording’s start date and time, duration and the event that triggered the recording.

Note

The recording’s start date and time is set according to the Axis product’s date and time settings. If the Axis product is configured to use a time zone different from the local time zone, make sure to configure the Recording time filters according to the product’s time zone. Date and time settings are configured under System Options > Date & Time, see Date & Time on page 41.

To find a recording, follow these steps:

1.Go to Recordings > List.

2.To reduce the number of recordings displayed, select the desired options under Filter: Recording time — List recordings that started between the From and To times.

Event — List recordings that were triggered by a specific event. Select continuous to list continuous recordings. Storage — List recordings from a specific storage device.

Sort — Specify how recordings should be sorted in the list. Results — Specify the maximum number of recordings to display.

3.To apply the filters, click the Filter button. Some filters may take a long time to complete.

4.The recordings are displayed in the Recording list.

To play a recording, select the recording and click Play. See also Play Recording on page 36.

To view detailed information about a recording, select the recording and click Properties.

To export a recording or a part of a recording as a video clip, select the recording and click Export. See also Export Video Clip on page 37.

To remove a recording from the storage device, select the recording and click Remove.

Play Recording

Recordings on the SD card or network share can be played directly from the Axis product’s webpages.

To play a recording, follow these steps:

1.Go to Recordings > List.

2.To reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply the filters. See also Find Recordings on page 36.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Page About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Symptoms, Possible Causes and Remedial Actions Connectors Performance ConsiderationsConnectors and Buttons Network ConnectorConnector Hardware OverviewLED Indicators SD Card SlotControl Button Color IndicationAccess the Product Access from a BrowserAccess from the Internet Set the Root PasswordLive View Controls on the Live ViewClick Use Https Manual TriggerGo to Setup Events Axis Media Control viewer toolbarPTZ Controls To show the manual trigger buttons in the Live ViewAccess the Product How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedMedia Streams Set Up the Product Basic SetupClick Save to apply the new settings VideoVideo Stream Pixel CounterStream Profiles 264Camera Settings Exposure SettingsImage Appearance White BalanceTo configure the view area View AreaOverlay Built-in IR Illuminations LEDsOverlay Image Go to Video Overlay ImageFocus Adjustment Privacy MaskUse Overlay Text in an Action Rule Go to Events Action RulesConfigure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons For more information about I/O ports, see I/O Ports onPreset Positions PTZ Pan Tilt ZoomGuard Tour AdvancedOperator Same as administrator but with lower priority Control QueueDetectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersDetectors Install Application Go to Setup ApplicationsApplications Application LicensesApplications Set Up Action Rules EventsTriggers Go to Events Action Rules and click AddInput Signal HardwareStorage SystemAdd Recipients ActionsRecipient Types Set Up Email Recipients Create SchedulesGo to Events Schedules and click Add Set Up Recurrences Go to Events Recurrences and click AddRecordings Find RecordingsPlay Recording Go to Recordings ListExport Video Clip Continuous RecordingGo to Recordings Continuous Languages System Options SecurityUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Basic TCP/IP Settings Go to Setup System Options Security CertificatesDate & Time NetworkIPv4 Address Configuration IPv6 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 BonjourStorage SD CardMount and Unmount SD Card Format SD CardMaintenance Ports & DevicesNetwork Share PortsSupport Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigScripting File UploadSystem Options Troubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Video Camera SettingsStorage and disk management problems Storage disruptionRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Function/group Specifications Events actions InstallationMaintenance General Casing PowerConnectors Function/group Specifications WarrantyFunction Pin Specifications Performance Considerations M2.13

M1143-L specifications

Axis Communications M1143-L is a robust and versatile network camera tailored for various surveillance applications. Known for its superior image quality and smart technologies, the M1143-L is an ideal choice for both indoor and outdoor environments.

At the heart of the M1143-L is its high-resolution imaging technology, providing stunning 1080p Full HD video at up to 30 frames per second. This guarantees clear, detailed images even in challenging light conditions. The camera features Lightfinder technology, which enhances low-light performance, ensuring that critical details are captured even in near darkness. Coupled with Wide Dynamic Range (WDR) technology, the M1143-L effectively deals with challenging lighting situations, balancing light and shadow for optimal clarity.

Robust construction is another hallmark of the M1143-L. Built to withstand harsh conditions, it adheres to IP66 and NEMA 4X ratings, making it dust-tight and protected against powerful water jets. This feature makes it suitable for outdoor use, providing durability against various weather elements.

The camera also includes built-in infrared (IR) illumination, which enables it to operate effectively even in complete darkness. The IR range can reach up to 30 meters, making it a powerful ally for nighttime surveillance.

Axis Communications prioritizes user-friendliness, and the M1143-L is no exception. The camera supports Power over Ethernet (PoE), simplifying installation by allowing power and data to be transmitted through a single cable. This reduces cable clutter while ensuring a reliable power supply. Additionally, the camera boasts an easy-to-use web-based interface for quick configuration and setup.

For enhanced security, the M1143-L supports advanced analytics and cybersecurity features. The camera can integrate with Axis’ range of video management software, offering seamless operation alongside other Axis devices. Furthermore, it is equipped with multiple user access levels, enhancing security by ensuring that only authorized personnel can access the footage.

In conclusion, Axis Communications M1143-L is a feature-rich network camera that combines high-resolution imaging, durability, and smart technologies, making it an excellent choice for a variety of surveillance needs. Its advanced features ensure reliable performance in diverse environments, providing peace of mind for users seeking top-tier security solutions.
Top Page Image Contents