Axis Communications M1143-L user manual Troubleshooting, Check the Firmware, Upgrade the Firmware

Page 52

AXIS M1143–L - User Manual

Troubleshooting

Troubleshooting

Check the Firmware

Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problem should be to check the current firmware version. The latest version may contain a correction that fixes your particular problem. The current firmware version in the Axis product is displayed in the page Setup > Basic Setup and in Setup > About.

Upgrade the Firmware

Important

•Your dealer reserves the right to charge for any repair attributable to faulty upgrade by the user.

•Preconfigured and customized settings are saved when the firmware is upgraded (providing the features are available in the new firmware) although this is not guaranteed by Axis Communications AB.

Note

•After the upgrade process has completed, the product will restart automatically. If restarting the product manually after the upgrade, always wait 10 minutes even if you suspect the upgrade has failed.

•When you upgrade the Axis product with the latest firmware from Axis website, the product receives the latest functionality available. Always read the upgrade instructions and release notes available with each new release before upgrading

the firmware.

To upgrade the product’s firmware:

1.Save the firmware file to your computer. The latest version of the firmware is available free of charge from Axis website at www.axis.com/techsup

2.Go to Setup > System Options > Maintenance in the product’s webpages.

3.Under Upgrade Server, click Browse and locate the file on your computer. Click Upgrade.

4.Wait approximately 10 minutes while the product is being upgraded and restarted. Then access the product.

AXIS Camera Management can be used for multiple upgrades. See www.axis.com for more information.

Emergency Recovery Procedure

If power or network connection is lost during the upgrade, the process fails and the product becomes unresponsive. Flashing red Status indicator indicates a failed upgrade. To recover the product, follow the steps below. The serial number is found on the product’s label.

1.In UNIX/Linux, type the following from the command line:

arp -s <IP address> <serial number> temp ping -l 408 <IP address>

In Windows, type the following from a command/DOS prompt (this may require that you run the command prompt as an administrator):

arp -s <IP address> <serial number> ping -l 408 -t <IP address>

2.If the product does not reply in 30 seconds, restart it and wait for a reply. Press CTRL+C to stop Ping.

3.Open a browser and type in the product’s IP address. In the page that opens, use the Browse button to select the upgrade file to use. Then click Load to restart the upgrade process.

4.After the upgrade is complete (1–10 minutes), the product automatically restarts and shows a steady green on the Status indicator.

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Page About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Symptoms, Possible Causes and Remedial Actions Connectors Performance ConsiderationsConnectors and Buttons Network ConnectorConnector Hardware OverviewLED Indicators SD Card SlotControl Button Color IndicationAccess the Product Access from a BrowserAccess from the Internet Set the Root PasswordLive View Controls on the Live ViewClick Use Https Manual TriggerGo to Setup Events Axis Media Control viewer toolbarPTZ Controls To show the manual trigger buttons in the Live ViewAccess the Product Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedMedia Streams Set Up the Product Basic SetupClick Save to apply the new settings VideoVideo Stream Pixel CounterStream Profiles 264Camera Settings Exposure SettingsImage Appearance White BalanceTo configure the view area View AreaOverlay Built-in IR Illuminations LEDsOverlay Image Go to Video Overlay ImageFocus Adjustment Privacy MaskUse Overlay Text in an Action Rule Go to Events Action RulesConfigure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons For more information about I/O ports, see I/O Ports onPreset Positions PTZ Pan Tilt ZoomGuard Tour AdvancedOperator Same as administrator but with lower priority Control QueueDetectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersDetectors Install Application Go to Setup ApplicationsApplications Application LicensesApplications Set Up Action Rules EventsTriggers Go to Events Action Rules and click AddInput Signal HardwareStorage SystemActions Add RecipientsRecipient Types Create Schedules Set Up Email RecipientsGo to Events Schedules and click Add Set Up Recurrences Go to Events Recurrences and click AddRecordings Find RecordingsPlay Recording Go to Recordings ListContinuous Recording Export Video ClipGo to Recordings Continuous Languages System Options SecurityUsers IP Address FilterCertificates IeeeGo to System Options Security Ieee Basic TCP/IP Settings Go to Setup System Options Security CertificatesDate & Time NetworkIPv4 Address Configuration IPv6 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 BonjourStorage SD CardMount and Unmount SD Card Format SD CardMaintenance Ports & DevicesNetwork Share PortsSupport Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigScripting File UploadSystem Options Troubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Video Camera SettingsStorage and disk management problems Storage disruptionRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Function/group Specifications Events actions InstallationMaintenance General Casing PowerFunction/group Specifications Warranty ConnectorsFunction Pin Specifications Performance Considerations M2.13

M1143-L specifications

Axis Communications M1143-L is a robust and versatile network camera tailored for various surveillance applications. Known for its superior image quality and smart technologies, the M1143-L is an ideal choice for both indoor and outdoor environments.

At the heart of the M1143-L is its high-resolution imaging technology, providing stunning 1080p Full HD video at up to 30 frames per second. This guarantees clear, detailed images even in challenging light conditions. The camera features Lightfinder technology, which enhances low-light performance, ensuring that critical details are captured even in near darkness. Coupled with Wide Dynamic Range (WDR) technology, the M1143-L effectively deals with challenging lighting situations, balancing light and shadow for optimal clarity.

Robust construction is another hallmark of the M1143-L. Built to withstand harsh conditions, it adheres to IP66 and NEMA 4X ratings, making it dust-tight and protected against powerful water jets. This feature makes it suitable for outdoor use, providing durability against various weather elements.

The camera also includes built-in infrared (IR) illumination, which enables it to operate effectively even in complete darkness. The IR range can reach up to 30 meters, making it a powerful ally for nighttime surveillance.

Axis Communications prioritizes user-friendliness, and the M1143-L is no exception. The camera supports Power over Ethernet (PoE), simplifying installation by allowing power and data to be transmitted through a single cable. This reduces cable clutter while ensuring a reliable power supply. Additionally, the camera boasts an easy-to-use web-based interface for quick configuration and setup.

For enhanced security, the M1143-L supports advanced analytics and cybersecurity features. The camera can integrate with Axis’ range of video management software, offering seamless operation alongside other Axis devices. Furthermore, it is equipped with multiple user access levels, enhancing security by ensuring that only authorized personnel can access the footage.

In conclusion, Axis Communications M1143-L is a feature-rich network camera that combines high-resolution imaging, durability, and smart technologies, making it an excellent choice for a variety of surveillance needs. Its advanced features ensure reliable performance in diverse environments, providing peace of mind for users seeking top-tier security solutions.
Top Page Image Contents