Axis Communications M3007-PV user manual Events

Page 33

AXIS M3007–PV

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available action rule triggers and conditions include:

•Applications – Use installed applications to trigger the rule. See Applications, on page 31.

•Detectors

-Day/Night Mode – Trigger the rule when the product switches between day mode (IR cut filter on) and night mode (IR cut filter off). This can for example be used to control an external infrared (IR) light connected to an output port.

-Motion Detection – Trigger the rule when motion is detected. See Motion Detection, on page 28.

-Tampering – Trigger the rule when tampering is detected. See Camera Tampering, on page 28.

•Hardware

-Network – Trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

•Input Signal

-Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. See Controls on the Live View Page, on page 9 . This can for example be used to validate actions during product installation and configuration.

•PTZ

•Storage

-Available – Trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.

-Full – Trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.

-Locked – Trigger the rule if the storage device is locked (write protected).

•System

-System Initializing – Trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.

•Time

-Recurrence – Trigger the rule periodically. See Recurrences, on page 36. This can for example be used to upload an image every 5 minutes.

-Use Schedule – Trigger the rule according to the selected schedule. See Schedules, on page 36.

Available actions include:

•PTZ Control

-Preset Position – Go to a preset position.

-Guard Tour – Start a guard tour. See Guard Tour, on page 27.

•Record Video – Record video to a selected storage.

33

Image 33

Contents Axis M3007-PV Liability About this DocumentIntellectual Property Rights Equipment ModificationsLearn More SupportAxis M3007-PV Table of ContentsNetwork Connector Connectors and ButtonsHardware Overview Hardware OverviewSD Card Slot LED IndicatorsControl Button Color IndicationAccessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariAccessing the Product Access from the Internet Set the Root PasswordClick Create self-signed certificate Set Power Line Frequency Live ViewControls on the Live View PTZ Controls Axis Media Control viewer toolbarMedia Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis M3007-PV Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterView modes OverviewPanorama Quad View Double PanoramaClick Save to apply the new settings ImageDirection Mjpeg 264Stream Profiles Camera SettingsImage Appearance White BalanceView areas Exposure SettingsShutter & Gain Set Shutter toOverlay Date/Time Formats in the online help To enable overlaysOverlay Image Go to Video Video Stream and select the Image tabUsing Overlay Text in an Action Rule Privacy MaskGo to Events Action Rules Live View Config Live View ConfigDefault Viewer for Browsers Viewer Settings User Defined LinksBrowser Viewer Description Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomAdvanced PTZ Pan Tilt Zoom Guard TourControls To add a guard tourDetectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionMedium level 50% Default valuesLow level 0% Recommended valuesApplications Install ApplicationApplications Application LicensesAxis M3007-PV Events EventsRecipients Setting Up an Action RuleFallback Action Go to Events Action Rules and click AddSetting Up an Email Recipient Recipient Use with actionGo to Events Recipients and click Add Recurrences Events SchedulesTo create a new schedule Go to Events Schedules and click AddRecordings RecordingsRecording List Continuous RecordingClick Save to save and start the recording Languages LanguagesSystem Options System OptionsSecurity UsersIeee Date & TimeCertificates CA CertificateNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 Axis Internet Dynamic DNS ServiceLinux/Unix syntax Linux/Unix exampleDNS Configuration Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationFTP NAT traversal port mapping for IPv4UPnPTM can be disabled under System Options Network UPnPTM QoS Quality of ServiceUPnPTM RTP/H.264Bonjour StorageSD Card Network ShareSupport MaintenanceSupport Overview To add a network shareLogs & Reports System OverviewScripting File UploadPlain Config Reset to Factory Default SettingsTroubleshooting TroubleshootingFirmware To upgrade the product’s firmware Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Troubleshooting Emergency Recovery ProcedureProblems setting the IP address Product cannot be accessed from a browserProduct is accessible locally but not externally Problems with streaming H.264Basic Video Camera Settings Video and image problems, generalStorage and disk management problems Key framesTechnical Specifications Technical SpecificationsMaintenance Built-in Function/group SpecificationsInstallation aids Data Streaming PowerTechnical Specifications Performance Considerations Axis M3007-PV