Axis Communications M3007-PV user manual Maintenance, Support Overview, To add a network share

Page 48

AXIS M3007–PV

System Options

To add a network share:

1.Go to System Options > Storage.

2.Click Network Share.

3.Enter the IP address, DNS or Bonjour name to the host server in the Host field.

4.Enter the name of the share in the Share field. Sub folders cannot be used.

5.If required, select The share requires login and enter the user name and password.

6.Click Connect.

To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.

To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.

Maintenance

The Axis product provides several maintenance functions. These are available under System Options > Maintenance.

Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings.

Note

A restart clears all entries in the Server Report.

Click Restore to reset most settings to the factory default values. The following settings are not affected:

•the boot protocol (DHCP or static)

•the static IP address

•the default router

•the subnet mask

•the system time

•the IEEE 802.1X settings

•uploaded applications are kept but must be restarted

Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The Axis product can also be reset to factory default using the control button, see Reset to Factory Default Settings, on page 50.

To identify the product or test the Status LED, click Flash LED under Identify and specify the duration in seconds, minutes or hours. This can be useful for identifying the product among other products installed in the same location.

For information about firmware upgrade, see Upgrading the Firmware, on page 51.

Support

Support Overview

The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance.

48

Image 48

Contents Axis M3007-PV About this Document LiabilityIntellectual Property Rights Equipment ModificationsSupport Learn MoreTable of Contents Axis M3007-PVConnectors and Buttons Network ConnectorHardware Overview Hardware OverviewLED Indicators SD Card SlotControl Button Color IndicationAccessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariAccessing the Product Access from the Internet Set the Root PasswordClick Create self-signed certificate Set Power Line Frequency Live ViewControls on the Live View Axis Media Control viewer toolbar PTZ ControlsHow to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis M3007-PV Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterView modes OverviewPanorama Double Panorama Quad ViewClick Save to apply the new settings ImageDirection 264 MjpegCamera Settings Stream ProfilesImage Appearance White BalanceExposure Settings View areasShutter & Gain Set Shutter toDate/Time Formats in the online help To enable overlays OverlayOverlay Image Go to Video Video Stream and select the Image tabUsing Overlay Text in an Action Rule Privacy MaskGo to Events Action Rules Live View Config Live View ConfigDefault Viewer for Browsers Viewer Settings User Defined LinksBrowser Viewer Description Preset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Guard Tour AdvancedControls To add a guard tourDetectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionDefault values Medium level 50%Low level 0% Recommended valuesInstall Application ApplicationsApplications Application LicensesAxis M3007-PV Events EventsSetting Up an Action Rule RecipientsFallback Action Go to Events Action Rules and click AddSetting Up an Email Recipient Recipient Use with actionGo to Events Recipients and click Add Events Schedules RecurrencesTo create a new schedule Go to Events Schedules and click AddRecordings RecordingsRecording List Continuous RecordingClick Save to save and start the recording Languages LanguagesSystem Options System OptionsSecurity UsersDate & Time IeeeCertificates CA CertificateBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4Linux/Unix syntax Linux/Unix exampleAdvanced TCP/IP Settings DNS ConfigurationNTP Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPQoS Quality of Service UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Storage BonjourSD Card Network ShareMaintenance SupportSupport Overview To add a network shareSystem Overview Logs & ReportsScripting File UploadReset to Factory Default Settings Plain ConfigTroubleshooting TroubleshootingFirmware To upgrade the product’s firmware Checking the FirmwareTroubleshooting Emergency Recovery Procedure Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserProduct is accessible locally but not externally Problems with streaming H.264Basic Video and image problems, general Video Camera SettingsStorage and disk management problems Key framesTechnical Specifications Technical SpecificationsFunction/group Specifications Maintenance Built-inInstallation aids Data Streaming PowerTechnical Specifications Performance Considerations Axis M3007-PV