Axis Communications AXIS Q8414-LVS user manual Assign IP Address Using ARP/Ping, Linux/Unix syntax

Page 46

AXIS Q8414-LVS Network Camera

System Options

Assign IP Address Using ARP/Ping

The product's IP address can be assigned using ARP/Ping. The command must be issued within 2 minutes of connecting power.

1.Acquire a free static IP address on the same network segment as the computer.

2.Locate the serial number (S/N) on the product label.

3.Open a command prompt and enter the following commands:

Linux/Unix syntax

arp -s <IP address> <serial number> temp ping -s 408 <IP address>

Linux/Unix example

arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -s 408 192.168.0.125

Windows syntax (this may require that you run the command prompt as an administrator)

arp -s <IP address> <serial number> ping -l 408 -t <IP address>

Windows example (this may require that you run the command prompt as an administrator)

arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125

4.Check that the network cable is connected and then restart the product by disconnecting and reconnecting power.

5.Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar.

6.Open a browser and type http://<IP address> in the Location/Address field.

For other methods of assigning the IP address, see the Installation and Management Software CD or the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/techsup

Note

•To open a command prompt in Windows, open the Start menu and type cmd in the Run/Search field.

•To use the ARP command in Windows 8/Windows 7/Windows Vista, right-click the command prompt icon and select Run as administrator.

•To open a command prompt in Mac OS X, open the Terminal utility from Application > Utilities.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

The AVHS settings are configured under System Options > Network > TCP IP > Basic. The possibility to connect to an AVHS service is enabled by default. To disable, clear the Enable AVHS box.

One-click enabled - Press and hold the product’s control button (see Hardware Overview on page 6 ) for about 3 seconds to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the one-click installation.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Axis Q8414-LVS Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q8414-LVS Network CameraTechnical Specifications Network Connector Connectors and ButtonsHardware Overview Audio Connector LED IndicatorsConnector SD Card SlotAxis Q8414-LVS Network Camera Access from the Internet Access the ProductAccess from a Browser Set the Root PasswordLive View Set Power Line FrequencyClick Create self-signed certificate Controls on the Live View Go to Setup EventsManual Trigger PTZ Controls Axis Media Control viewer toolbarAMC Audio Controls Axis Q8414-LVS Network Camera Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream Access Audio Streams Focus & Zoom Set Up the ProductBasic Setup Go to Video & Audio Focus & ZoomWhen satisfied, click Enable iris to enable the iris Pixel Counter Video and AudioVideo Stream ImageStream Profiles 264Image Appearance Camera SettingsExposure Settings White BalanceSet Shutter to Iris adjustmentShutter & Gain Day/NightBuilt-in IR Illuminations LEDs View AreaOverlay Go to Video & Audio Video Stream and select the Image tabOverlay Image Privacy MaskGo to Video & Audio Overlay Image Audio Settings Audio ModesAudio Input Audio OutputAudio Clips Viewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons PTZ Pan Tilt Zoom Preset PositionsGuard Tour Advanced ControlsMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAudio Detection Go to Detectors Audio DetectionApplications Install ApplicationGo to Setup Applications Application LicensesAxis Q8414-LVS Network Camera Triggers Set Up Action RulesEvents Go to Events Action Rules and click AddActions PTZ Control Add RecipientsRecipient Types Go to Events Recipients and click AddCreate Schedules Set Up RecurrencesSet Up Email Recipients Go to Events Schedules and click AddContinuous Recording RecordingsRecording List Go to Recordings ListClick Save to save and start the recording Users System OptionsSecurity IP Address FilterAudio Support Date & TimeIeee CertificatesIPv6 Address Configuration Basic TCP/IP SettingsIPv4 Address Configuration NetworkLinux/Unix example Assign IP Address Using ARP/PingLinux/Unix syntax Axis Video Hosting System AvhsAdvanced TCP/IP Settings Http NAT traversal port mapping for IPv4QoS Quality of Service SocksRTP/H.264 StorageUPnPTM BonjourFormat SD Card Network ShareGo to System Options Storage Click Network Share Ports MaintenancePorts & Devices Port StatusSystem Overview SupportSupport Overview Logs & ReportsPlain Config Reset to Factory Default SettingsFile Upload Emergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Setup Video & Audio Camera SettingsNo audio SettingsStorage and disk management problems Poor audio qualityTechnical Specifications Installation Function/group Specifications Network SecurityInstallation aid MaintenanceConnectors Function/group Specifications General CasingPower DimensionsConnectors Function Pin SpecificationsAudio Input Performance ConsiderationsAudio Output M1.4
Top Page Image Contents