Axis Communications AXIS Q8414-LVS user manual Network Share, Format SD Card

Page 51

AXIS Q8414-LVS Network Camera

System Options

The SD card is automatically mounted when the card is inserted into the Axis product or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1.Open the Axis product’s webpages and go to Setup > System Options > Storage.

2.Click SD Card.

3.Click Unmount.

4.The card can now be removed.

Format SD Card

NOTICE

Formatting the SD card will remove all data and recordings stored on the card.

Important

If autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is inserted into the Axis product.

An SD card inserted into the product can be manually formatted to one of the supported file systems. To manually format the SD card, follow these steps:

1.Insert the SD card in the SD card slot.

2.Open the Axis product’s webpages and go to Setup > System Options > Storage.

3.Click SD Card.

4.Click Format and select the desired file system.

5.Click OK to start formatting the card.

Network Share

Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to www.axis.com/products/cam_companion_software/supported.htm

Note

For NAS recommendations see www.axis.com

To add a network share:

1.Go to System Options > Storage.

2.Click Network Share.

3.Enter the IP address, DNS or Bonjour name to the host server in the Host field.

4.Enter the name of the share in the Share field. Sub folders cannot be used.

5.If required, select The share requires login and enter the user name and password.

6.Click Connect.

To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.

To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

51

Image 51

Contents Axis Q8414-LVS Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q8414-LVS Network Camera Table of ContentsTechnical Specifications Connectors and Buttons Network ConnectorHardware Overview SD Card Slot LED IndicatorsConnector Audio ConnectorAxis Q8414-LVS Network Camera Set the Root Password Access the ProductAccess from a Browser Access from the InternetSet Power Line Frequency Live ViewClick Create self-signed certificate Go to Setup Events Controls on the Live ViewManual Trigger Axis Media Control viewer toolbar PTZ ControlsAMC Audio Controls Axis Q8414-LVS Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream Access Audio Streams Go to Video & Audio Focus & Zoom Set Up the ProductBasic Setup Focus & ZoomWhen satisfied, click Enable iris to enable the iris Image Video and AudioVideo Stream Pixel Counter264 Stream ProfilesWhite Balance Camera SettingsExposure Settings Image AppearanceDay/Night Iris adjustmentShutter & Gain Set Shutter toGo to Video & Audio Video Stream and select the Image tab View AreaOverlay Built-in IR Illuminations LEDsPrivacy Mask Overlay ImageGo to Video & Audio Overlay Image Audio Modes Audio SettingsAudio Output Audio InputAudio Clips Browser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsGo to Setup Live View Config User Defined LinksOutput Buttons Preset Positions PTZ Pan Tilt ZoomGuard Tour Controls AdvancedGo to Detectors Camera Tampering DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Audio Detection Audio DetectionApplication Licenses Install ApplicationGo to Setup Applications ApplicationsAxis Q8414-LVS Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents TriggersActions Go to Events Recipients and click Add Add RecipientsRecipient Types PTZ ControlGo to Events Schedules and click Add Set Up RecurrencesSet Up Email Recipients Create SchedulesGo to Recordings List RecordingsRecording List Continuous RecordingClick Save to save and start the recording IP Address Filter System OptionsSecurity UsersCertificates Date & TimeIeee Audio SupportNetwork Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAxis Video Hosting System Avhs Assign IP Address Using ARP/PingLinux/Unix syntax Linux/Unix exampleAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpSocks QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Network Share Format SD CardGo to System Options Storage Click Network Share Port Status MaintenancePorts & Devices PortsLogs & Reports SupportSupport Overview System OverviewReset to Factory Default Settings Plain ConfigFile Upload Check the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserSetup Video & Audio Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Maintenance Function/group Specifications Network SecurityInstallation aid InstallationDimensions Function/group Specifications General CasingPower ConnectorsFunction Pin Specifications ConnectorsPerformance Considerations Audio InputAudio Output M1.4