Axis Communications AXIS 233D user manual Advanced

Page 32

32AXIS 233D - Dome Configuration

The camera uses the coordinates of the center of the image to set the lower left and upper right zone areas. First navigate where you would like the most lower left point of the OSDI Zone to be located. By clicking on the Get button the coordinates are set. Proceed to where the upper right point of the zone should be located and click on its Get button. Give the zone a descriptive name and go to Overlay Settings, on page 19 for information about including the name of OSDI Zone in the Image text.

Advanced

Limits -Define the pan, tilt, zoom and focus limits for the AXIS 233D. Movements to the left and right, up and down can be restricted to narrow the area under surveillance. The near focus limit can be set to avoid focusing on objects too close to the camera.

Note: Once a limit has been saved, this position can not be exceeded by the AXIS 233D unless the values have been reset and saved to a greater value first (i.e. reset the default values of the mechanical restrictions).

Move speed sets the speed of the camera's Pan/Tilt movements. The default setting is maximum speed.

E-flip - This flips the image automatically when the target moves, for example, under the camera and then moves on. In situations where E-flip is not desired set the Lower limit to -90 ° , which will turn off this function.

Ctrl Panel - Shortcut command buttons can be created to provide direct access to various commands provided by the AXIS 233D. The buttons are then displayed in the PTZ Panel which is available on the Live View page by clicking Ctrl Panel (see page 10). AXIS VAPIX gives you the possibility to create your own commands. For more information go to www.axis.com

Control Queue - The administrator can set up a queue for the PTZ controllers. Once set up, the PTZ Control Queue buttons will appear on the Live View page offering one viewer exclusive control for a limited amount of time. Other users will be placed in the queue.

PTZ Control Queue on Live View page

Please use the online help files for more information.

Image 32

Contents Axis 233D About This Document Safety Notice Battery Replacement Table of contents Axis 233D Key Features Product OverviewOverview Status LED Indicator Color DescriptionUsing the Network Dome Camera Accessing the Axis 233DAxis 233D Using the Network Dome Camera Click-in-image movement Area ZoomPan/Tilt/Zoom Controls Pan/Tilt/Zoom Control QueueAxis 295 Video Surveillance Joystick Motion Jpeg Video StreamsStream Types MPEG-4 protocols and communication methods How to stream MPEG-4 RTP/RTSP/HTTP or RTP/RTSP/HTTPSOther MPEG-4 clients Other methods of accessing the video streamAxis Media Control Overview of the Setup Tools Configuring the Network Dome CameraAccessing the Setup Tools Video & Image Settings Image SettingsOverlay Settings Overlay Image SettingsGo to Setup Video & Image Overlay Image Video StreamAdvanced Camera Settings Privacy MaskLow Light Behavior MPEG-4 Settings Audio Settings Audio modeAudio Audio ChannelsAudio Input Audio OutputAdvanced Audio Live View Config LayoutView Check Show Custom LinkAction Buttons Viewer Settings Html ExamplesWorking with External Video Sources Sequence ModeExternal Video Dome Configuration Preset PositionsGuard Tour Osdi ZonesAdvanced Event Configuration Event ServersHow to set up a triggered event Event TypesTriggered Event Click Add triggered on the Event typesPre-trigger and Post-trigger buffers Click Add scheduled on the Event types How to set up a scheduled eventScheduled Event Motion Detection Port Status History SensitivityUser Settings check the corresponding checkboxes to enable System OptionsSecurity IP Address FilteringHttps 802.1X Network Admission ControlAuthentication process Date & TimeAxis 233D System Options Services Network Basic TCP/IP SettingsIP Address Configuration Network Advanced TCP/IP Settings DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mappingFTP Network TrafficSmtp email QoS Quality of serviceQoS Settings Maintenance UPnPBonjour Ports & devicesDefault router Subnet mask System time Configuration SupportAdvanced Logs & ReportsAbout Resetting to Factory Default SettingsResetting to the Factory Default Settings Terminal Connectors Power connections Terminal connector blocks Pin Function Description Power/AudioSchematic Diagram Axis 233D I/O connectors and power Troubleshooting Checking the Firmware Updating the FirmwareEmergency Recovery Procedure LED Indicator flash routine SequenceSupport Symptoms, Possible Causes and Remedial Actions Using ARP PingSnapshot images Technical Specifications LensShutter time System integration General performance considerations Optimizing your systemFrame rates BandwidthIndex 802.1xRadius Axis 233D