Axis Communications AXIS 233D user manual Network Advanced TCP/IP Settings, DNS Configuration

Page 44

44AXIS 233D - System Options

Network - Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses on your network.

Obtain DNS server address via DHCP - automatically use the DNS server settings provided by the DHCP server. Click the View button to see the current settings.

Use the following DNS server address - enter the desired DNS server by specifying the following:

Domain name - enter the domain(s) to search for the host name used by the AXIS 233D. Multiple domains can be separated by semicolons (;). The host name is always the first part of a Fully Qualified Domain Name, e.g. myserver is the host name in the Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is the Domain name.

DNS servers - enter the IP addresses of the primary and secondary DNS servers.

NTP Configuration

Obtain NTP server address via DHCP - check this radio button to automatically look up and use the NTP server settings as provided by DHCP. Click the View button to see the current settings.

Use the following NTP server address - to make manual settings, check this radio button and enter the host name or IP address of the NTP server.

Host Name Configuration

The AXIS 233D can be accessed using a host name, instead of an IP address. The host name is usually the same as the assigned DNS Name. It is always the first part of a Fully Qualified Domain Name and is always one word, with no period. For example, myserver is the host name in the Fully Qualified Domain Name myserver.mycompany.com.

The enable dynamic DNS updates allows you to alias a dynamic IP address to a static host name, allowing your computer to be more easily accessed from various locations on the Internet. Outside users can always access your server using the associated DNS name regardless of the WAN IP. The DNS server used by the user and/or the DNS server responsible for the domain in use must support RFC2136 and allow updates from the AXIS 233D.

The TTL (Time To Live) value determines how long (in seconds) the reply from the DNS server should be remembered when checking that the domain name for the registered IP address is still valid. For more information, please see the online help

Image 44
Contents Axis 233D About This Document Safety Notice Battery Replacement Table of contents Axis 233D Key Features Product OverviewOverview Status LED Indicator Color DescriptionUsing the Network Dome Camera Accessing the Axis 233DAxis 233D Using the Network Dome Camera Click-in-image movement Area ZoomPan/Tilt/Zoom Controls Pan/Tilt/Zoom Control QueueAxis 295 Video Surveillance Joystick Motion Jpeg Video StreamsStream Types MPEG-4 protocols and communication methods How to stream MPEG-4 RTP/RTSP/HTTP or RTP/RTSP/HTTPSOther MPEG-4 clients Other methods of accessing the video streamAxis Media Control Overview of the Setup Tools Configuring the Network Dome CameraAccessing the Setup Tools Video & Image Settings Image SettingsOverlay Settings Overlay Image SettingsGo to Setup Video & Image Overlay Image Video StreamAdvanced Camera Settings Privacy MaskLow Light Behavior MPEG-4 Settings Audio Settings Audio modeAudio Audio ChannelsAudio Input Audio OutputAdvanced Audio Live View Config LayoutView Check Show Custom LinkAction Buttons Viewer Settings Html ExamplesWorking with External Video Sources Sequence ModeExternal Video Dome Configuration Preset PositionsGuard Tour Osdi ZonesAdvanced Event Configuration Event ServersHow to set up a triggered event Event TypesTriggered Event Click Add triggered on the Event typesPre-trigger and Post-trigger buffers Click Add scheduled on the Event types How to set up a scheduled eventScheduled Event Motion Detection Port Status History SensitivityUser Settings check the corresponding checkboxes to enable System OptionsSecurity IP Address FilteringHttps 802.1X Network Admission ControlAuthentication process Date & TimeAxis 233D System Options Services Network Basic TCP/IP SettingsIP Address Configuration Network Advanced TCP/IP Settings DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mappingFTP Network TrafficSmtp email QoS Quality of serviceQoS Settings Maintenance UPnPBonjour Ports & devicesDefault router Subnet mask System time Configuration SupportAdvanced Logs & ReportsAbout Resetting to Factory Default SettingsResetting to the Factory Default Settings Terminal Connectors Power connections Terminal connector blocks Pin Function Description Power/AudioSchematic Diagram Axis 233D I/O connectors and power Troubleshooting Checking the Firmware Updating the FirmwareEmergency Recovery Procedure LED Indicator flash routine SequenceSupport Symptoms, Possible Causes and Remedial Actions Using ARP PingSnapshot images Technical Specifications LensShutter time System integration General performance considerations Optimizing your systemFrame rates BandwidthIndex 802.1xRadius Axis 233D