Axis Communications AXIS M3203-V user manual Events

Page 30

AXIS M3203-V Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available action rule triggers and conditions include:

•Applications – Use installed applications to trigger the rule. See Applications on page 28.

•Detectors

-Live Stream Accessed – Trigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notifications.

-Motion Detection – Trigger the rule when motion is detected. See Motion Detection on page 25.

-Tampering – Trigger the rule when tampering is detected. See Camera Tampering on page 25.

•Hardware

-Network – Trigger the rule if network connection is lost or restored.

•Input Signal

-Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. See Controls on the Live View Page on page 9 . This can for example be used to validate actions during product installation and configuration.

-Virtual Inputs – can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for example, be connected to buttons in the VMS user interface.

•PTZ

-Moving – Trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.

-Preset Reached – Trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.

•Storage

-Disruption – Trigger the rule if storage problems are detected, for example if the storage device is unavailable, removed, full, locked or if other read or write problems occur. This can for example be used to send maintenance notifications.

•System

-System Ready – Trigger the rule when the product has been started and all services are running. This can for example be used to send a notification when the product restarts.

•Time

-Recurrence – Trigger the rule periodically. See Recurrences on page 33. This can for example be used to upload an image every 5 minutes.

-Use Schedule – Trigger the rule according to the selected schedule. See Schedules on page 33.

Available actions include:

•Overlay Text – Display an overlay text. See Using Overlay Text in an Action Rule on page 19.

•PTZ Control

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Axis M3203-V Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis M3203-V Network CameraFor technical specifications, see Connectors and ButtonsNetwork Connector RJ45 Ethernet connector with Power over Ethernet PoELED Indicators Control ButtonColor Indication Access from the Internet Accessing the ProductAccess from a Browser Set the Root PasswordSet Power Line Frequency Live ViewClick Create self-signed certificate Axis Media Control viewer toolbar Go to Setup EventsControls on the Live View Manual TriggerPTZ Controls How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis M3203-V Network Camera Setting Up the Product Basic SetupPixel Counter VideoVideo Stream ImageStream Profiles Camera SettingsClick Save to apply the new settings 264View Area Exposure SettingsTo configure the view area Image AppearanceGo to Video Video Stream and select the Image tab OverlayOverlay Image Go to Video Overlay ImageUsing Overlay Text in an Action Rule Privacy MaskGo to Events Action Rules Axis M3203-V Network Camera Viewer Settings Live View ConfigDefault Viewer for Browsers Browser Viewer DescriptionUser Defined Links PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions Guard TourAdvanced ControlsMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingGo to Detectors Motion Detection Set Up Motion Detection WindowsMotion Detection Parameters Parameter Object Size History Sensitivity DescriptionLow level 0% Default valuesMedium level 50% Recommended valuesApplications Install ApplicationGo to Setup Applications Application LicensesAxis M3203-V Network Camera Events Setting Up an Action Rule RecipientsGo to Events Action Rules and click Add Setting Up an Email Recipient Recipient Use with actionGo to Events Recipients and click Add To create a new schedule SchedulesRecurrences Go to Events Schedules and click AddContinuous Recording RecordingsRecording List Go to Recordings ListLanguages Users System OptionsSecurity IP Address FilterIeee CertificatesGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates NetworkAssign IP Address Using ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM BonjourNetwork Share MaintenanceStorage To add a network shareSystem Overview SupportSupport Overview Logs & ReportsReset to Factory Default Settings Plain ConfigFile Upload Checking the Firmware TroubleshootingEmergency Recovery Procedure Upgrading the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video Camera SettingsRe-mount the storage device Storage and disk management problemsStorage disruption Reformat the SD card and then click MountTechnical Specifications Memory Power Function/group Specifications System ApplicationMaintenance Installation aids ConnectorsFunction/group Specifications Video Performance ConsiderationsM2.15
Top Page Image Contents