Axis Communications AXIS M3203-V user manual Recordings, Recording List, Continuous Recording

Page 34

AXIS M3203-V Network Camera

Recordings

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

•To start a continuous recording, see page 34.

•To set up action rules, see page 31.

•To access recordings, see Recording List on page 34.

•To configure camera controlled storage, see Storage on page 44.

Recording List

Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that triggered the recording.

To play or download a recording, follow these steps:

1.Go to Recordings > List.

2.Use the filter to narrow the list of recordings. Enter the desired filter criteria and click Filter. Some filters may take a long time to complete.

3.Select the recording.

4.Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded file is a zip file containing a minimum of three files, of which the Matroska (mkv) files are the actual recordings. The recordings are time-stamped with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click Properties.

To remove a recording, select the recording and click Remove.

Continuous Recording

The Axis product can be configured to continuously save video to a storage device. See Storage on page 44 for more information about storage devices. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings. If a new stream profile is selected while a recording is ongoing, the recording will be stopped and saved in the recording list and a new recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings.

To start a continuous recording, follow these steps:

1.Go to Recordings > Continuous.

2.Select Enabled.

3.Select the type of storage device from the Storage list.

4.Select a Stream profile to use for continuous recordings.

5.Click Save to save and start the recording.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Axis M3203-V Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis M3203-V Network CameraFor technical specifications, see Connectors and ButtonsNetwork Connector RJ45 Ethernet connector with Power over Ethernet PoEControl Button LED IndicatorsColor Indication Access from the Internet Accessing the ProductAccess from a Browser Set the Root PasswordLive View Set Power Line FrequencyClick Create self-signed certificate Axis Media Control viewer toolbar Go to Setup EventsControls on the Live View Manual TriggerPTZ Controls Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis M3203-V Network Camera Setting Up the Product Basic SetupPixel Counter VideoVideo Stream ImageStream Profiles Camera SettingsClick Save to apply the new settings 264View Area Exposure SettingsTo configure the view area Image AppearanceGo to Video Video Stream and select the Image tab OverlayOverlay Image Go to Video Overlay ImagePrivacy Mask Using Overlay Text in an Action RuleGo to Events Action Rules Axis M3203-V Network Camera Viewer Settings Live View ConfigDefault Viewer for Browsers Browser Viewer DescriptionUser Defined Links PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions Guard TourAdvanced ControlsMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingGo to Detectors Motion Detection Set Up Motion Detection WindowsMotion Detection Parameters Parameter Object Size History Sensitivity DescriptionLow level 0% Default valuesMedium level 50% Recommended valuesApplications Install ApplicationGo to Setup Applications Application LicensesAxis M3203-V Network Camera Events Recipients Setting Up an Action RuleGo to Events Action Rules and click Add Recipient Use with action Setting Up an Email RecipientGo to Events Recipients and click Add To create a new schedule SchedulesRecurrences Go to Events Schedules and click AddContinuous Recording RecordingsRecording List Go to Recordings ListLanguages Users System OptionsSecurity IP Address FilterCertificates IeeeGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates NetworkAssign IP Address Using ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM BonjourNetwork Share MaintenanceStorage To add a network shareSystem Overview SupportSupport Overview Logs & ReportsPlain Config Reset to Factory Default SettingsFile Upload Checking the Firmware TroubleshootingEmergency Recovery Procedure Upgrading the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video Camera SettingsRe-mount the storage device Storage and disk management problemsStorage disruption Reformat the SD card and then click MountTechnical Specifications Memory Power Function/group Specifications System ApplicationMaintenance Installation aids ConnectorsFunction/group Specifications Video Performance ConsiderationsM2.15
Top Page Image Contents