Panasonic WV-CW484 operating instructions Lens, Back-focus Setting BACK-FOCUS Setup

Page 41
**BACK-FOCUS SETUP**
ABF →PUSH SWMANUAL-ADJ↵
C/L← → B/W AUTO
SETUP-SW LOCK OFF
NEARFAR
.........I.........
INDICATOR XXXX RET TOP END

•Image stabilization may not function where there is excessive camera movement or when the scene is low light or low contrast objects.

16. LENS

•When using WV-CW484F or WV-CW484S (with a Panasonic x2 varifocal lens), select

PANASONIC.

•When using WV-CW484FK or WV-CW484SK (with a lens other than Panasonic), select

OTHER.

17. Back-focus Setting (BACK-FOCUS SETUP)

If applicable, perform adjustment of the lens focus as described in p. 26 "Before Back-focus Adjustment". Perform adjustment of the back- focus (flange-back: the gap between the lens and focal plane) remotely on this menu using a system controller. After installation, you can per- form this adjustment when defocus arises that may be caused by long-term use, environmental changes, etc.

Important: Do not use the ABF function for continuous or repetitive purposes (ex. autofocus etc.). This function is to be used to correct defocus caused by switching between color and black - and - white when/after installing the camera.

1.Select BACK-FOCUS on the top menu and press the [SET] button.

→The BACK-FOCUS SETUP menu opens.

2.Select ABF and press the [SET] button.

→Adjustment is automatically performed.

Notes:

•Performing ABF will function to obtain the best focus around the center areas in a scene.

•Performing ABF is available only when OFF, X2 AUTO, or X2 FIX is selected for SENS UP.

•Using the ABF function under low light conditions may cause noise.

3.Select MANUAL-ADJ and press the [SET] button if manual adjustment is required. The manual back-focus adjustment screen will open.

•Use the [LEFT] or [RIGHT] buttons to move the "I" cursor and obtain a proper focus.

→Refer to the 4-digit number on the second bottom line. The larger the number is, the bet- ter the focus will be.

•Select RET and press the [SET] button to go back to the menu setup.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Model No. WV-CW484 Series Do not Remove Cover or Back No USER-SERVICEABLE Parts Inside English Important Safety InstructionsLimitation of Liability Disclaimer of WarrantyPreface FeaturesContents Precautions Avoid installing in the following locations Observe the following for installationInstalling place Do not aim the apparatus at strong light sourcesWhat to do if Over Heat appears on the display Mounting screwsConsumable parts Major Operating Controls and Their Functions Azimuth Angle adjuster Power cable 12 V DC or 24 V AC Cautions2Optional heater connector 6 pin female 3LED indicatorLens Mounting WV-CW484FK, CW484SK Installations Using Mounting Bracket Fixing the camera attachment to the mounting bracket Using Mounting Bracket How to mount the cameraUsing a Junction Box Protrusion Screw hole of camera attachment Rear screw Camera fixing screw Winding the provided butyl tape Waterproof ProcessWaterproof processing of cable connection Downward Image Adjustment How to use a variable focal lens Zoom/focus adjustmentPrecaution Power ConnectionWire Colors & Functions Camera power cable ConnectionsCable Length and Wire Gauge Introduction InstallationOptional Heater Unit WV-CW4H For Adjusting the Focus Before Back-focus AdjustmentFor Using General Vari-focal Lenses HintsSetup item Description About Setup MenusSettings items of the camera setup Language Basic operation Page Camera Identification Setting Camera ID Setting ProceduresLanguage Setup Language Setup Super Dynamic 3 Function SUPER-D3 Light Control Mode Setting ALCALC Mode with SUPER-D3 on ALC Mode with SUPER-D3 OFF Shutter Speed Setting ShutterElectronic Sensitivity Enhancement Sens UP Gain Control Setting AGCWhite Balance Setting White BAL Synchronization Setting SyncAWC Setting Motion Detection Setting Motion DETManual Fine Adjustment Available time second 2, 5, 10Motion Detector Demo ModeResolution Setting Resolution Digital Noise Reduction Setting DNRBlack and White Mode Setting BW Mode About MODE2 of Motion DetectionPrivacy Zone Setting Privacy Zone Auto Image Stabilizer Stabilizer Electronic Zoom EL-ZOOMCamera Picture Upside Down Positioning UPSIDE-DOWN Lens Back-focus Setting BACK-FOCUS SetupChroma Level Setting Chroma Gain Special Menu Special SetupPedestal Level Setting Pedestal Aperture Gain Setting AP GainChroma Phase Hue Setting HUE Pixel Compensation Setting PIX OFFSerial number of the camera will be displayed To reset to the default settings Camera ResetSymptom TroubleshootingGeneral specifications SpecificationsCamera Lens WV-CW484S, WV-CW484FABF, MANUAL, AUTO/PRESET/FIX Standard AccessoriesOptional Accessories Version Française Instructions de sécurité importantes Déni de la garantie Limitation de responsabilitéCaractéristiques dominantes PréfaceTable DES Matières Cet appareil na pas dinterrupteur dalimentation Mesures de précautionPour avoir lassurance dobtenir des performances stables Ne jamais essayer de démonter cette caméra vidéoPropos de lappareil déshumidificateur Éviter toute installation dans les emplace- ments suivantsEmplacement dinstallation Vis dinstallation Principaux organes de commande et fonctions Vis de verrouillage dinclinaison Câble de sortie vidéo avec le connecteur BNCAzimut dispositif de réglage angulaire 0Vis de blocage de caméra vidéoMonture dobjectif WV-CW484FK, CW484SK Installations En utilisant une boîte de jonction InstallationsEn utilisant la platine de fixation dinstallation TOP Utilisation d’une boîte de raccordement Comment installer la caméra vidéoEn utilisant la platine de fixation dinstallation Page Remarques Enroulement de la bande en butyle fournie Opération de mise sous étanchéitéMise sous étanchéité du raccordement de câble Vers le bas Réglage de limage Comment se servir dun objectif à focale variable Réglage de zoom ou de mise au pointConnexion de sortie vidéo BranchementsRaccordement dalimentation Couleurs des fils et fonctionsDE Courant Alternatif Longueur de câble et calibre pour filsAppareil de chauffage optionnel WV-CW4H Pour régler la mise au point ConseilsAvant dexécuter le réglage de tirage arrière Configuration Propos des menus de configurationAjuste le niveau de chrominance densité de la Couleur Remarque Utilisation de baseRemarques Paramétrage didentification de la caméra vidéo Camera ID Configuration de la langueProcédures de réglage Mode ALC avec la fonction SUPER-D3 activée Paramétrage de mode de contrôle de lumière ALCFonction Super Dynamic 3 SUPER-D3 SUPER-D3 on Valide laRéglage de la vitesse d’obturation Shutter Mode ALC avec la fonction SUPER-D3 OFFAccroissement de la sensibilité électronique Sens UP Paramétrage de contrôle de gain AGCAjuster et le signal vidéo de sortie de Signal de sortie vidéo de la caméra vidéo àRéglage de synchronisation Sync Réglage de balance des blancs White BALRéglage précis et manuel Paramétrage de la détection de mouvement Motion DETParamétrage de AWC Détecteur de mouvement Mode de démonstrationParamétrage du mode monochromatique BW Mode Paramétrage de résolution ResolutionParamétrage de la réduction de bruit numérique DNR Propos du MODE2 de la détection de mouvementParamétrage de zone de confidentialité Privacy Zone Stabilisateur dimage automatique Stabilizer Zoom électronique EL-ZOOMParamétrage de tirage arrière BACK-FOCUS Setup 18-1. Réglage de niveau de chrominance Menu spécial Special SetupParamétrage de compensation de pixel PIX OFF 18-4. Réglage de phase de chrominance teinte HUE18-2. Réglage de gain douverture AP Gain Le numéro de série de cette caméra vidéo sera affiché Symptômes DépannageObjectif WV-CW484S, WV-CW484F Caractéristiques techniquesCaméra vidéo ENGLISH, FRENCH, GERMAN, SPANISH, Italian Accessoires standardAccessoires optionnels Panasonic Canada Inc

WV-CW484 specifications

The Panasonic WV-CW484 is a sophisticated network camera designed for versatile surveillance applications. It is a part of Panasonic's line of high-performance IP cameras that are widely used in various environments, including retail, education, transportation, and municipal surveillance. This camera stands out due to its robust features that cater to both indoor and outdoor monitoring needs.

One of the main features of the WV-CW484 is its high-resolution imaging capability. It utilizes a 1/3-inch CCD sensor that delivers clear and detailed images at resolutions up to 640 x 480 pixels. The camera supports progressive scan technology, ensuring that it captures sharp images without motion blur, which is essential for monitoring fast-moving subjects.

The WV-CW484 is equipped with a durable and weather-resistant housing, meeting the IP66 standard. This makes it suitable for installation in challenging outdoor conditions, protecting it from dust, rain, and other environmental factors. Additionally, it has a built-in heater that aids in maintaining optimal operation in low-temperature environments, ensuring reliable performance year-round.

Another notable aspect of the WV-CW484 camera is its integration of advanced digital signal processing technologies. These features enhance image quality by reducing noise and improving visibility in low-light conditions. The camera also includes a wide dynamic range function, allowing it to capture clear images in scenes with high contrast, such as brightly lit areas with shadows.

The pan-tilt functionality allows for flexible positioning and the ability to cover a broader area. Users can control the camera's movement remotely, making it easier to focus on particular areas of interest. Additionally, the WV-CW484 supports multiple streaming formats, including MPEG-4 and JPEG, enabling efficient transmission of video data across various network conditions.

For ease of installation and use, the camera is compatible with a wide range of network protocols and can be seamlessly integrated into existing surveillance systems. This versatility facilitates remote monitoring and management, allowing users to access live feeds and playback recordings from any device with internet connectivity.

In summary, the Panasonic WV-CW484 is a feature-rich network camera that combines high-performance imaging, robust housing, and advanced processing technologies. Its versatility, durability, and ease of integration make it an ideal choice for comprehensive surveillance solutions in a variety of applications.
Top Page Image Contents