Panasonic WV-CW484 Aperture Gain Setting AP Gain, Pedestal Level Setting Pedestal

18-2. Aperture Gain Setting (AP GAIN)

Move the "I" cursor to adjust the aperture gain level.

Lower the level when moire (a kind of noise, optical interference) appears on the screen as part of minute crosshatch pattern, etc.

18-3. Pedestal Level Setting (PEDESTAL)

Move the "I" cursor to adjust the pedestal level (black level).

18-4. Chroma Phase (Hue) Setting (HUE)

Move the "I" cursor to adjust the hue (chroma phase) level.

18-5. Pixel Compensation Setting (PIX OFF)

Perform settings to compensate a maximum of 16 blemish pixels on the pickup device.

1.Select PIX OFF and press the [SET] button.

→The PIX OFF menu opens with numbers from 1 to 16.

2.Select a number and press the [SET] button.

→The PIX OFF assignment screen opens with a + cursor.

3.Move the cursor to the center of a blemish position until its appearance becomes less obvious. Finally, press the [SET] button.

→The horizontal and vertical positions (coor- dinate) of the blemish will be displayed with a 6-digit number on the second bot- tom line.

→The blemish position is registered to be compensated.

→The screen returns to the PIX OFF menu that displays the number followed by an asterisk if it has been registered.

4.Repeat above steps as necessary.

		**PIX OFF**
		2	3	4
	1
	5	6	7	8
9		10	11	12
13		14	15	16

000000

RET TOP END

5.To cancel a registration, select an asterisked number in the PIX OFF menu and press the [SET] button.

→The PIX OFF assignment screen opens.

Hold down the the [LEFT] and [RIGHT] buttons simultaneously for 2 seconds or more.

→The PIX OFF menu appears displaying the number without an asterisk if its registration has been cancelled.

43