Axis Communications 232D, 231D Configuring the Network Dome Camera, Accessing the Setup Tools

Page 17

AXIS 231D/232D - Configuring the Network Dome Camera 17

Configuring the Network Dome Camera

This section describes how to configure the AXIS 231D/232D and is intended for the product Administrator who has unrestricted access to all Setup tools and Operator who has access to Video & Image, Live View Config and Event Configuration. See the section on Security, on page 34 for more information on user access control.

The AXIS 231D/232D is configured under Setup from a standard browser.

Accessing the Setup Tools

Follow the instructions below to access the Setup Tools from a Web browser.

1.Start the Web browser and enter the IP address or domain name of the AXIS 231D/232D in the location/address field.

2.The Live View page is now displayed. Click Setup to display the Setup tools.

Overview of the Setup Tools

Setup tools

Image 17

Contents Axis 231D/232D Network Dome Camera User’s Manual About This Document Table of contents Axis 231D/232D Axis 232D Axis 231D/232DHardware Description Hardware InventoryConnection module connector Accessing the Axis 231D/232D Using the Network Dome CameraLive View Click-in-image Pan/Tilt/Zoom controlsControl panel Preset PositionsUsing CGI links to control PTZ devices Pan/Tilt/Zoom Control Queue Motion Jpeg Video StreamsStream Types MPEG-4 protocols and communication methods How to stream MPEG-4RTP/RTSP/HTTP or RTP/RTSP/HTTPS Other methods of accessing the video streamAxis Media Control Other MPEG-4 clients Overview of the Setup Tools Configuring the Network Dome CameraAccessing the Setup Tools Image Settings Video & Image SettingsOverlay Image Settings Overlay SettingsGo to Setup Video & Image Overlay Image Video StreamAdvanced Image SettingsOverlay image requirements Overlay image limitationsMPEG-4 Settings Layout Live View ConfigCustomizing the default Check Show Custom Link User Defined LinksLive View Action Buttons Default ViewerUpdate Sequence ModeHtml Examples External VideoGuard Tour Dome ConfigurationPreset Positions Control Queue Event Servers Event ConfigurationEvent Types How to set up a triggered eventTriggered Event Click Add triggered on the Event typesPre-trigger and Post-trigger buffers Click Add scheduled on the Event types How to set up a scheduled eventScheduled Event Motion Detection History Sensitivity Port StatusIP Address Filtering System OptionsSecurity Https Date & TimeAxis 231D/232D System Options Services Network Basic TCP/IP SettingsDNS Configuration Network Advanced TCP/IP SettingsNAT traversal Link-Local AddressSmtp email SocksUPnP MaintenanceRTP Multicast/MPEG-4 Ports & devices I/O PortsSupport ConfigurationAbout Resetting to Factory Default SettingsUsing the Control Button Switch off the Axis 231D/232D by disconnecting the power Connection Module Pinout Connection ModuleSchematic Diagram Axis 231D/232D I/O connectors and power Updating the Firmware TroubleshootingChecking the Firmware Emergency Recovery Procedure Using ARP Ping Symptoms, Possible Causes and Remedial ActionsVideo Image Problems Models Technical SpecificationsPower Accessories Optimizing your system General performance considerationsBandwidth Frame rates Motion JpegFrame rates MPEG-4 Axis 231D/232D Technical Specifications Axis 231D IndexSnmp Socks Page Axis 231D/232D User’s Manual Rev