Axis Communications user manual Axis 231D/232D System Options

Page 36

36AXIS 231D/232D - System Options

From the Time Mode section, select the preferred method to use for setting the time:

•Synchronize with computer time - sets the time from the clock on your computer.

•Synchronize with NTP Server - the network camera will obtain the time from an NTP server every 60 minutes. Specify the NTP server's IP address or host name.

Note: Note that if using a host name for the NTP server, a DNS server must be configured under TCP/IP settings. See Network > Advanced TCP/IP Settings below.

• Set manually - this option allows you to manually set the time and date.

Date & Time Format Used in Images - specify the formats for the date and time (12h or 24h) displayed in the Live View video streams.

Use the predefined formats or use your own custom date and time formats. See Advanced File Naming & Date/Time Formats in the help files for information on how to create your own file formats.

Image 36

Contents Axis 231D/232D Network Dome Camera User’s Manual About This Document Table of contents Axis 231D/232D Axis 231D/232D Axis 232DHardware Inventory Hardware DescriptionConnection module connector Using the Network Dome Camera Accessing the Axis 231D/232DLive View Pan/Tilt/Zoom controls Click-in-imagePreset Positions Using CGI links to control PTZ devicesControl panel Pan/Tilt/Zoom Control Queue Video Streams Stream TypesMotion Jpeg How to stream MPEG-4 MPEG-4 protocols and communication methodsOther methods of accessing the video stream Axis Media ControlRTP/RTSP/HTTP or RTP/RTSP/HTTPS Other MPEG-4 clients Configuring the Network Dome Camera Accessing the Setup ToolsOverview of the Setup Tools Video & Image Settings Image SettingsOverlay Settings Overlay Image SettingsGo to Setup Video & Image Overlay Image Video StreamImage Settings AdvancedOverlay image requirements Overlay image limitationsMPEG-4 Settings Live View Config Customizing the defaultLayout User Defined Links Live ViewCheck Show Custom Link Default Viewer Action ButtonsSequence Mode UpdateHtml Examples External VideoDome Configuration Preset PositionsGuard Tour Control Queue Event Configuration Event ServersHow to set up a triggered event Event TypesTriggered Event Click Add triggered on the Event typesPre-trigger and Post-trigger buffers How to set up a scheduled event Scheduled EventClick Add scheduled on the Event types Motion Detection Port Status History SensitivitySystem Options SecurityIP Address Filtering Date & Time HttpsAxis 231D/232D System Options Network Basic TCP/IP Settings ServicesNetwork Advanced TCP/IP Settings DNS ConfigurationLink-Local Address NAT traversalSocks Smtp emailMaintenance UPnPRTP Multicast/MPEG-4 Ports & devices I/O PortsConfiguration SupportResetting to Factory Default Settings Using the Control ButtonAbout Switch off the Axis 231D/232D by disconnecting the power Connection Module Connection Module PinoutSchematic Diagram Axis 231D/232D I/O connectors and power Troubleshooting Checking the FirmwareUpdating the Firmware Emergency Recovery Procedure Symptoms, Possible Causes and Remedial Actions Using ARP PingVideo Image Problems Technical Specifications ModelsPower Accessories General performance considerations Optimizing your systemFrame rates Motion Jpeg Frame rates MPEG-4Bandwidth Axis 231D/232D Technical Specifications Index Axis 231DSnmp Socks Page Axis 231D/232D User’s Manual Rev