10AXIS 231D/232D - Using the Network Dome Camera
Pan/Tilt/Zoom controls
The controls available for the Pan/Tilt/Zoom (PTZ) are displayed on the Live View by default. These are enabled/disabled for specified users by the administrator under System Options > Security > Users > User List.
The Pan Tilt and Zoom bars control their respective functions in two different ways. Clicking anywhere on the bar's gradient allows for a 'smooth' adjustment of the camera's position, while clicking on the arrows at the two ends of the bar cause a stepped, incremental change
•the Pan bar - moves the camera to the right and left
•the Tilt bar - tips the camera up and down
•the Zoom bar - zooms the view in and out
•the Focus bar - adjusts the focus
•the Iris bar - adjusts the brightness of the image
Clicking on the bars themselves or on the arrows at the end of the bars will move the camera to a new position.
.
Note: Setting the iris and focus manually will disable Auto iris/Auto focus.
Each position on the bar represents a defined position in the camera’s range of movement, with the center of the bar representing the point midway between the two extremes of movement.
Clicking a position directly on the bar moves the camera directly to the new position in one smooth movement. Clicking on the arrows at the ends of a bar causes a stepped, incremental change.
Click-in-image
The PTZ device can also be controlled using
Center mode means that when clicking in the image, the camera view will center on the absolute position that was clicked.