Axis Communications AXIS 221 user manual Other MPEG-4 clients

Page 15

AXIS 221 - Video Streams 15

Other MPEG-4 clients

Although it may be possible to use other clients to view the MPEG-4 stream, this is not guaranteed by Axis.

For some other clients, e.g. QuickTime™ the Video Object Type must be set to Simple. It may also be necessary to adjust the advanced MPEG-4 settings.

To assess the video stream from e.g. QuickTime™ the following path can be used:

rtsp://<IP address>/mpeg4/media.amp

This path is for all supported methods, and the client will negotiate with the AXIS 221 to determine exactly which transport protocol to use.

Image 15

Contents Axis 221 Network Camera User’s Manual About this Document Contents Axis Product Features Rear panel OverviewNetwork LED indicatorsAccess from a browser Accessing the CameraSetting the root password Accessing the camera from the InternetFocusing Live View Axis 221 Accessing the Camera Video Streams Video stream typesMotion Jpeg MPEG-4 protocols and communication methods How to stream MPEG-4Other methods of accessing the video stream Axis Media ControlRTP/RTSP/HTTP or RTP/RTSP/HTTPS Other MPEG-4 clients Accessing the setup tools from a browser Setup ToolsImage Appearance Video and Image SettingsImage Settings Text Overlay SettingsOverlay/Mask Type Overlay/Mask SettingsVideo Stream TestOverlay image requirements Upload and use an overlayCamera settings Advanced settingsMPEG-4 Settings Mjpeg Settings Use custom settings Live View ConfigExample Upload Own Web FilesOwn home User-defined LinksOutput Buttons Default Video FormatDefault Viewer Action ButtonsExternal Video Sequence ModeViewer settings Html ExamplesEvent Configuration Event ServersDefinitions Click Add triggered... on the Event Types Configuring Event TypesHow to set up a triggered event Triggered EventScheduled Event Pre-trigger and Post-trigger buffersCamera Tampering SettingsMotion Detection History Sensitivity Port StatusReferrals System OptionsSecurity Users Security IP Address FilteringSecurity Https Security CA servers Authentication processNetwork Basic TCP/IP Settings IP Address ConfigurationDate & Time NTP Configuration Network Advanced TCP/IP SettingsServices DNS ConfigurationHost Name Configuration Link-Local IPv4 AddressNAT Traversal Network Traffic Network SocksNetwork QoS Quality of Service QoS SettingsNetwork Smtp email Network Bonjour Network SnmpNetwork UPnP Network RTP Multicast/MPEG-4Support Overview LED SettingsMaintenance SupportLogs & Reports AdvancedResetting to the Factory Default Settings Using the Reset ButtonAbout Terminal connector Unit ConnectorsTerminal connector schematic diagram Terminal connector pinout tablePower connections Power connector blockSchematic Diagram Power terminal block and power connectors RS-232 connector Upgrading the Firmware TroubleshootingBasic Configuration Checking the FirmwareAxis Support Emergency Recovery ProcedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsVideo/Image problems general Status and Network indicator LEDs are flashing red rapidly Removing and attaching the lens Replacing the lensFrame rate Technical SpecificationsCasing Applications Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Glossary of Terms Page Axis 221 Index IndexRtsp