Axis Communications AXIS 221 LED Settings, Maintenance, Support Overview, System Overview

Page 43

AXIS 221 - System Options 43

LED Settings

The Status and Network Indicator LEDs can be set to flash at a configurable interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED behavior, see page 7, or the online help.

Note: The LED does not flash when the stream is retrieved using MPEG-4 multicast.

Maintenance

•Restart - The unit is restarted without changing any of the settings. Use this method if the unit is not behaving as expected.

•Restore - The unit is restarted and most current settings are reset to the factory default values. The only settings saved are:

•the boot protocol (DHCP or static)

•the static IP address

•the default router

•the subnet mask

•the system time

•Default - The Default button should be used with caution. Pressing this button will return all of the camera's settings, including the IP address, to the factory default values. The camera will then have to be re-installed.

Upgrade Server - See Upgrading the Firmware , on page 50.

Backup - To take a backup of all of the parameters, and any user-defined scripts, click the Backup button. If necessary, it is then possible to return to the previous settings if the settings are changed and there is unexpected behavior.

Restore - Click the Browse button to locate the saved backup file (see above) and then click the Restore button. The settings will be restored to the previous configuration.

Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for the configuration of multiple units or for firmware upgrades.

Support

Support Overview

The Support Overview page provides valuable information on troubleshooting and contact information, should you require technical assistance.

System Overview

The System Overview page provides an overview of the current network, security, event and camera settings.

Image 43

Contents Axis 221 Network Camera User’s Manual About this Document Contents Axis Product Features Rear panel OverviewNetwork LED indicatorsAccess from a browser Accessing the CameraAccessing the camera from the Internet Setting the root passwordFocusing Live View Axis 221 Accessing the Camera Video stream types Video StreamsMotion Jpeg MPEG-4 protocols and communication methods How to stream MPEG-4Axis Media Control Other methods of accessing the video streamRTP/RTSP/HTTP or RTP/RTSP/HTTPS Other MPEG-4 clients Accessing the setup tools from a browser Setup ToolsImage Appearance Video and Image SettingsImage Settings Text Overlay SettingsOverlay/Mask Type Overlay/Mask SettingsVideo Stream TestOverlay image requirements Upload and use an overlayCamera settings Advanced settingsMPEG-4 Settings Mjpeg Settings Use custom settings Live View ConfigExample Upload Own Web FilesOwn home User-defined LinksOutput Buttons Default Video FormatDefault Viewer Action ButtonsExternal Video Sequence ModeViewer settings Html ExamplesEvent Servers Event ConfigurationDefinitions Click Add triggered... on the Event Types Configuring Event TypesHow to set up a triggered event Triggered EventScheduled Event Pre-trigger and Post-trigger buffersCamera Tampering SettingsMotion Detection History Sensitivity Port StatusReferrals System OptionsSecurity Users Security IP Address FilteringSecurity Https Security CA servers Authentication processIP Address Configuration Network Basic TCP/IP SettingsDate & Time NTP Configuration Network Advanced TCP/IP SettingsServices DNS ConfigurationLink-Local IPv4 Address Host Name ConfigurationNAT Traversal Network Traffic Network SocksQoS Settings Network QoS Quality of ServiceNetwork Smtp email Network Bonjour Network SnmpNetwork UPnP Network RTP Multicast/MPEG-4Support Overview LED SettingsMaintenance SupportLogs & Reports AdvancedUsing the Reset Button Resetting to the Factory Default SettingsAbout Terminal connector Unit ConnectorsTerminal connector schematic diagram Terminal connector pinout tablePower connector block Power connectionsSchematic Diagram Power terminal block and power connectors RS-232 connector Upgrading the Firmware TroubleshootingBasic Configuration Checking the FirmwareAxis Support Emergency Recovery ProcedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsVideo/Image problems general Status and Network indicator LEDs are flashing red rapidly Removing and attaching the lens Replacing the lensFrame rate Technical SpecificationsCasing Applications Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Glossary of Terms Page Axis 221 Index IndexRtsp