AXIS 221 - System Options 45
Axis strongly recommends that you do not use this function unless you fully understand its consequences. Axis support provides no assistance for customized scripts.
For more information, please visit the Developer pages at www.axis.com/developer
Plain Config - this function is for the advanced user with previous experience of configuring Axis cameras. All parameters can be set and modified from this page. Help is available via the links on the standard setup pages.
About
Third Party Software Licenses - click View licenses for a list of the licensed software used in the AXIS 221.
Resetting to the Factory Default Settings
To reset the camera to the original factory default settings, go to the System Options > Maintenance web page (as described in Maintenance, on page 43) or use the Reset button (see the illustration in Overview, on page 6) as described below:
Using the Reset Button
To reset the camera to the factory default settings using the Control Button:
1.Disconnect the power adapter, or the network cable if using PoE.
2.Press and hold the Control button while reconnecting power.
3.Keep the Control button pressed until the Status Indicator color changes to amber (which may take up to 15 seconds).
4.Release the Control button.
5.When the Status Indicator changes to Green (which may take up to 1 minute), the process is complete and the camera has been reset. The unit will now have the default IP address 192.168.0.90 if you are not using a DHCP server.