Axis Communications 216FD/FD-V user manual Rtsp

Page 39

AXIS 216FD/FD-V - System Options 39

Use NAT traversal when your AXIS 216FD/FD-V is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the camera.

LAN (intranet)

WAN (internet)

Broadband

(NAT)ISP router

Notes: • For NAT traversal to work, this must also be supported by the broadband router.

•The broadband router has many different names: “NAT router”, “Network router“, Internet Gateway”, “Broadband sharing device” or “Home firewall” but the essential purpose of the device is the same.

Enable/Disable - When enabled, the AXIS 216FD/FD-V will attempt to configure port mapping in a NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in the camera (see System Options > Network > UPnP).

Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field provided.

If a router is not manually specified, the AXIS 216FD/FD-V will automatically search for NAT routers on your network. If more than one router is found, the default router will be selected.

Alternative HTTP port - Select this option to manually define an external HTTP port. Enter the port number in the field provided. If no port is entered here a port number will automatically be selected when NAT traversal is enabled.

Notes: • An alternative HTTP port can be used/be active even if NAT traversal is disabled. This is useful if e.g. your NAT router does not support UPnP and you need to manually configure port forwarding in the NAT router.

•If you attempt to manually enter a port that is already in use, another available port will automatically be selected.

•When the port is selected automatically it will be displayed in this field. This can be changed by entering a new port number and clicking Save.

RTSP

The RTSP protocol allows a connecting client to start an MPEG-4 stream. Check the box to enable the server and enter the RTSP port number to use. The default setting is 554. Note that MPEG-4 video streams will not be available if this service is not enabled.

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Axis 216FD/FD-V Fixed Dome Network Camera User’s Manual About this Document Safety Notice Battery Replacement Contents Axis 216FD/FD-V Description Key featuresProduct overview ModelsLED OverviewLED LED indicatorsAccess from a browser Accessing the CameraAccessing the camera from the Internet Setting the PasswordAdjusting the image Live View AMC audio controls Video Streams How to stream MPEG-4QuickTime & Real Player MPEG-4 clientsMotion Jpeg Axis Media Control AMCAlternative methods of accessing the video stream Configuration Accessing the Setup toolsAxis Media Control Image Appearance Video & Image settingsOverlay/Mask Text Overlay SettingsAdvanced Camera Settings Video StreamAdvanced MPEG-4 Settings GOV Settings Low Light BehaviorBit Rate Control Audio Settings Enable AudioAudio Audio mode Audio ChannelsAudio Input Audio Output Layout Live View ConfigCustomizing the default Upload Own Web FilesOwn Home Output Buttons Default Video FormatDefault Viewer Action ButtonsExternal Video Sequence ModeAMC Settings Html ExamplesEvent Configuration Event ServersDefinitions Click Add triggered on the Event types Configuring Event TypesHow to set up a triggered event Triggered EventScheduled Event Pre-trigger and Post-trigger buffersMotion Detection Object Size Port StatusReferrals System OptionsSecurity IP Address FilteringHttps 802.1x Network Admission ControlRadius Authentication processCA servers Network Basic TCP/IP SettingsIP Address Configuration Date & TimeNetwork Advanced TCP/IP Settings ServicesDNS Configuration NAT traversal port mapping NTP ConfigurationHost Name Configuration Link-Local AddressRtsp QoS Quality of service QoS SettingsNetwork Traffic UPnP Smtp emailPorts & Devices LED SettingsMaintenance BonjourSupport ConfigurationResetting to the Factory Default Settings Using the Control ButtonAdvanced I/O Terminal Connector Terminal connectorPinout and Interface Terminal Connector Checking the Firmware TroubleshootingSetup Basic Configuration Go to SetupAxis Support Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Camera is accessible locally, but not externallyBrowser Decode only I frames Power indicator is not constantly litCamera is inaccessible UsersNo audio Problems uploading filesAudio volume too low/high Is enabled under System Options Date & TimeIllumination Technical SpecificationsClock Software Optimizing your system General performance considerationsBandwidth Axis 216FD/FD-V Glossary of Terms Glossary of TermsHalf-duplex See Full-duplex Allowed to enterMegapixel See Pixel VOP See VOPAxis 216FD/FD-V Glossary of Terms SSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the network AMC IndexSnmp

216FD/FD-V specifications

Axis Communications has established itself as a leader in network video solutions, and the Axis 216FD/FD-V series is a prime example of their commitment to innovation and quality. This series of fixed dome network cameras blends advanced technology with a robust design, making it suitable for a variety of surveillance needs.

One of the standout features of the Axis 216FD/FD-V cameras is their impressive image quality. Equipped with a 1/2.8” progressive scan RGB CMOS sensor, these cameras deliver high-definition video at a resolution of up to 1080p. This ensures that every detail is captured, whether in broad daylight or in low-light conditions, thanks to the cameras' exceptional low-light performance. The ability to produce clear images in diverse lighting situations makes them ideal for installation in various environments such as retail spaces, transportation hubs, and public venues.

In addition to high-definition video, the Axis 216FD/FD-V series also offers advanced video analytics, which can help users gain deeper insights into their surveillance data. Features like motion detection and tampering alarm capabilities enhance security by alerting users to any suspicious activity. Moreover, the built-in Axis Zipstream technology reduces bandwidth and storage requirements without compromising image quality, making it an efficient choice for businesses looking to minimize costs.

The design of the Axis 216FD/FD-V cameras is another highlight. Featuring a discreet, compact dome form factor, they can be seamlessly integrated into various environments. Their vandal-resistant casing maximizes durability, ensuring reliable operation even in high-risk areas. The cameras are also IP66-rated, providing protection against dust and harsh weather conditions, an essential characteristic for outdoor surveillance.

Installation and integration are made easy with the Axis 216FD/FD-V series. The cameras support Power over Ethernet (PoE), allowing for simpler connectivity and reducing the need for additional power cabling. Additionally, they are compatible with Axis Camera Management software, facilitating efficient management and configuration.

In summary, the Axis 216FD/FD-V series offers a compelling combination of features and technologies. With its high-definition image quality, intelligent video analytics, durable design, and easy installation, this series represents a versatile solution for modern surveillance needs, reaffirming Axis Communications’ status as a pioneer in the field of network video surveillance.
Top Page Image Contents