Axis Communications 216FD/FD-V user manual Bonjour, Ports & Devices, LED Settings, Maintenance

Page 42

AXIS 216FD/FD-V - System Options 42

Bonjour

The AXIS 216FD/FD-V includes support for Bonjour. When enabled, the camera is automatically detected by operating systems and clients that support this.

RTP / MPEG-4

These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use for the video stream(s) in multicast MPEG-4 format. Only certain IP addresses and port numbers should be used for multicast streams. For more information, please see the online help.

Ports & Devices

I/O Ports - the pinout, interface support and the control and monitoring functions provided by this connector are described in The I/O Terminal Connector, on page 46.

LED Settings

The Status indicator LED on the front of the camera can be set to flash at a configurable interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED behavior, see page 8, or the online help. Note that the LED does not flash when the stream is retrieved using MPEG-4 multicast.

Maintenance

•Restart - The camera is restarted without changing any of the settings.

•Restore - The unit is restarted and most current settings are reset to factory default val- ues. The settings that will not be reset are as follows:

•the boot protocol (DHCP or static)

•the static IP address

•the default router

•the subnet mask

•Default - The default button should be used with caution. Pressing this will return all of the camera's settings to the factory default values (including the IP address)

Upgrade Server - See Upgrading the Firmware, on page 48.

Backup - To take a backup of all of the parameters, and any user-defined scripts, click this button. If necessary, it will then be possible to return to the previous settings, if settings are changed and there is unexpected behavior.

Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore button. The settings will be restored to the previous configuration.

Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for the configuration of multiple units or for firmware upgrades.

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Axis 216FD/FD-V Fixed Dome Network Camera User’s Manual About this Document Safety Notice Battery Replacement Contents Axis 216FD/FD-V Models Key featuresProduct overview DescriptionOverview LEDLED indicators LEDAccessing the Camera Access from a browserSetting the Password Accessing the camera from the InternetAdjusting the image Live View AMC audio controls How to stream MPEG-4 Video StreamsAxis Media Control AMC MPEG-4 clientsMotion Jpeg QuickTime & Real PlayerAlternative methods of accessing the video stream Configuration Accessing the Setup toolsAxis Media Control Video & Image settings Image AppearanceVideo Stream Text Overlay SettingsAdvanced Camera Settings Overlay/MaskAdvanced MPEG-4 Settings GOV Settings Low Light BehaviorBit Rate Control Audio Settings Enable AudioAudio Audio mode Audio ChannelsAudio Input Audio Output Live View Config LayoutCustomizing the default Upload Own Web FilesOwn Home Action Buttons Default Video FormatDefault Viewer Output ButtonsHtml Examples Sequence ModeAMC Settings External VideoEvent Configuration Event ServersDefinitions Triggered Event Configuring Event TypesHow to set up a triggered event Click Add triggered on the Event typesPre-trigger and Post-trigger buffers Scheduled EventMotion Detection Port Status Object SizeIP Address Filtering System OptionsSecurity Referrals802.1x Network Admission Control HttpsAuthentication process RadiusDate & Time Network Basic TCP/IP SettingsIP Address Configuration CA serversNetwork Advanced TCP/IP Settings ServicesDNS Configuration Link-Local Address NTP ConfigurationHost Name Configuration NAT traversal port mappingRtsp QoS Quality of service QoS SettingsNetwork Traffic Smtp email UPnPBonjour LED SettingsMaintenance Ports & DevicesConfiguration SupportResetting to the Factory Default Settings Using the Control ButtonAdvanced I/O Terminal Connector Terminal connectorPinout and Interface Terminal Connector Go to Setup TroubleshootingSetup Basic Configuration Checking the FirmwareEmergency Recovery Procedure Axis SupportSymptoms, Possible Causes and Remedial Actions Camera is accessible locally, but not externallyBrowser Users Power indicator is not constantly litCamera is inaccessible Decode only I framesIs enabled under System Options Date & Time Problems uploading filesAudio volume too low/high No audioTechnical Specifications IlluminationClock Software General performance considerations Optimizing your systemBandwidth Glossary of Terms Axis 216FD/FD-V Glossary of TermsAllowed to enter Half-duplex See Full-duplexVOP See VOP Megapixel See PixelAxis 216FD/FD-V Glossary of Terms SSL/TSL Secure Socket Layer/Transport Layer Security URL Uniform Resource Locator An address on the network Index AMCSnmp

216FD/FD-V specifications

Axis Communications has established itself as a leader in network video solutions, and the Axis 216FD/FD-V series is a prime example of their commitment to innovation and quality. This series of fixed dome network cameras blends advanced technology with a robust design, making it suitable for a variety of surveillance needs.

One of the standout features of the Axis 216FD/FD-V cameras is their impressive image quality. Equipped with a 1/2.8” progressive scan RGB CMOS sensor, these cameras deliver high-definition video at a resolution of up to 1080p. This ensures that every detail is captured, whether in broad daylight or in low-light conditions, thanks to the cameras' exceptional low-light performance. The ability to produce clear images in diverse lighting situations makes them ideal for installation in various environments such as retail spaces, transportation hubs, and public venues.

In addition to high-definition video, the Axis 216FD/FD-V series also offers advanced video analytics, which can help users gain deeper insights into their surveillance data. Features like motion detection and tampering alarm capabilities enhance security by alerting users to any suspicious activity. Moreover, the built-in Axis Zipstream technology reduces bandwidth and storage requirements without compromising image quality, making it an efficient choice for businesses looking to minimize costs.

The design of the Axis 216FD/FD-V cameras is another highlight. Featuring a discreet, compact dome form factor, they can be seamlessly integrated into various environments. Their vandal-resistant casing maximizes durability, ensuring reliable operation even in high-risk areas. The cameras are also IP66-rated, providing protection against dust and harsh weather conditions, an essential characteristic for outdoor surveillance.

Installation and integration are made easy with the Axis 216FD/FD-V series. The cameras support Power over Ethernet (PoE), allowing for simpler connectivity and reducing the need for additional power cabling. Additionally, they are compatible with Axis Camera Management software, facilitating efficient management and configuration.

In summary, the Axis 216FD/FD-V series offers a compelling combination of features and technologies. With its high-definition image quality, intelligent video analytics, durable design, and easy installation, this series represents a versatile solution for modern surveillance needs, reaffirming Axis Communications’ status as a pioneer in the field of network video surveillance.
Top Page Image Contents