Page 16 | AXIS 210/210A/211/211A Installation Guide |
Connection diagram
| Switch |
|
|
|
3.3V | Mode | + |
|
|
| Power |
|
|
|
| Supply | - | + |
2
e.g., doorbell
Relay
GND 1
3
Device
4
LED indicators
LED | Color | Indication |
|
|
|
Network | Green | Steady for connection to a 100 Mbit/s network. Flashes for network activity. |
|
|
|
| Amber | Steady for connection to 10 Mbit/s network. Flashes for network activity. |
|
|
|
| Unlit | No network connection. |
|
|
|
Status | Green | Steady green for normal operation. |
|
| Note: The Status LED can be configured to be unlit during normal operation, or to |
|
| flash only when the camera is accessed. To configure, go to Setup > System Options |
|
| > LED settings. See the online help files for more information. |
|
|
|
| Amber | Steady during startup, during reset to factory default or when restoring settings. |
|
|
|
| Red | Slow flash for failed upgrade. |
|
|
|
Power | Green | Normal operation. |
|
|
|
| Amber | Flashes green/amber during firmware upgrade. |
|
|
|