Axis Communications AXIS 214 PTZ Audio Stream Types, MPEG-4 protocols and communication methods

Page 16

16AXIS 214 PTZ - Video and Audio Streams

Audio Stream Types

The audio stream types for audio are:

•G.711 - International standard for encoding wired-telephone audio. Uses PCM samples to compress audio where higher signal values are compressed more than lower values. In Axis products, this sets the coding type to μ-law 64 kbit/s.

•G.726 - Uses PCM samples to code the difference between samples (ADPCM). Reduces bandwidth without losing too much useful audio. In Axis products, this sets the coded bit rate to 24 or 32 kbit/s.

All stream types are ITU-T standards and operate on frequencies of up to 4 kHz.

MPEG-4 protocols and communication methods

To deliver live streaming video over IP networks, various combinations of transport protocols and broadcast methods are employed.

•RTP (Realtime Transport Protocol) is a protocol that allows programs to manage the real-time transmission of multimedia data, via unicast or multicast.

•RTSP (Real Time Streaming Protocol) serves as a control protocol, to negotiate which transport protocol to use for the stream. RTSP is thus used by a viewing client to start a unicast session, see below.

•UDP (User Datagram Protocol) is a communications protocol that offers limited service for exchanging data in a network that uses the Internet Protocol (IP). UDP is an alterna- tive to the Transmission Control Protocol (TCP). The advantage of UDP is that it is not required to deliver all data and may drop network packets when there is e.g. network congestion. This is suitable for live video, as there is no point in re-transmitting old information that will not be displayed anyway.

•Unicasting is communication between a single sender and a single receiver over a net- work. This means that the video stream goes independently to each user, and each user gets their own stream. A benefit of unicasting is that if one stream fails, it only affects one user.

•Multicast is bandwidth-conserving technology that reduces bandwidth usage by simul- taneously delivering a single stream of information to multiple network users. This technology is used primarily on delimited networks (intranets), as each user needs an uninterrupted data flow and should not rely on network routers.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Axis 214 PTZ About this Document Table of contents Axis 214 PTZ Index Product Description Rear panel StatusAxis 214 PTZ Product Description Accessing the camera from a browser Accessing the cameraSetting the password for root Accessing the camera from the Internet Live View Pan/Tilt/Zoom controls Control panelViewer controls Server push not available for Microsoft Internet ExplorerQuickTime Java appletPTZ Control Queue Still ImageVideo Stream Types Video and Audio StreamsMotion Jpeg Audio Stream Types MPEG-4 protocols and communication methodsAxis Media Control How to stream MPEG-4RTP/RTSP/HTTP or RTP/RTSP/HTTPS Other methods of accessing the video stream Using Motion JpegUsing MPEG-4 Other MPEG-4 clientsAccessing the Audio Streams QuickTime/Windows Media PlayerSetup Tools Accessing the setup tools from a browserVideo & Image settings Image AppearanceOverlay Settings Overlay Image SettingsGo to Setup Video & Image Overlay Image Video StreamOverlay image requirements Image Formats Image SizeAdvanced Camera Settings Lighting Conditions Image SettingsMPEG-4 Audio Enable AudioAudio Channels Audio Input Audio OutputAdvanced Audio Settings Noise canceller threshold value Noise canceller attenuationAxis 214 PTZ Audio Use custom settings Live View ConfigLayout Upload Own Web Files Own HomeUser Defined Links Check Show Custom LinkPlease use the online help for details Html Examples PTZ Configuration Preset PositionsSequence Mode Advanced LimitsControl Queue Event Configuration Event ServersHow to set up a triggered event Event TypesTriggered Event Click Add triggered on the Event typesHow to set up a scheduled event Pre-trigger and Post-trigger buffersScheduled Event Click Add scheduled on the Event typesConfiguring Motion Detection Motion DetectionPort Status Motion Detection ParametersSecurity Users System OptionsSecurity IP Address Filter Security Https Date & TimeNetwork Basic TCP/IP Settings ServicesNetwork Advanced TCP/IP Settings DNS ConfigurationNTP Configuration Host Name ConfigurationNAT Traversal port mapping Network SocksNetwork Traffic Maintenance Network Smtp emailNetwork Snmp Network UPnPSupport ConfigurationAdvanced Resetting to the factory default settings Using the Control ButtonConnections Inputs and outputsConnecting audio equipment Troubleshooting Setup Basic ConfigurationChecking the Firmware Updating the FirmwareSupport Symptoms, Possible Causes and Remedial Actions Using ARP and PingSnapshot images Poor performance Technical Specifications Video compressionPower Axis 214 PTZ PAL delivers the following file sizes General performance considerations Optimizing your systemFrame rates Motion Jpeg Frame rates MPEG-4Bandwidth Glossary of Terms Compression See Image Compression Half-duplex See Full-duplex Axis 214 PTZ Glossary of Terms Rtcp offers quality-of-service feedback from receivers to URL Uniform Resource Locator An address on the network Axis 214 PTZ Glossary of Terms Index Axis 214 PTZ IndexSmtp

AXIS 214 PTZ specifications

Axis Communications, a pioneer in network video solutions, has made significant strides with the release of its AXIS 214 PTZ camera. This robust camera is designed for professional applications requiring remote pan, tilt, and zoom capabilities, providing excellent versatility and control in surveillance scenarios.

One of the standout features of the AXIS 214 PTZ is its ability to deliver high-quality video with a resolution of up to 720x480 pixels. This ensures that users are able to capture clear and detailed footage, which is essential for effective monitoring and incident identification. The camera also has a wide dynamic range, allowing it to perform well in varying lighting conditions, which can often be a challenge in outdoor settings.

The PTZ function allows users to control the camera's movement remotely, making it possible to monitor large areas with just one device. It can pan a full 360 degrees and has a tilt range that enables it to cover a significant vertical span. Coupled with a 10x optical zoom, users can focus in on specific details, whether it be a facial recognition task, reading a license plate, or just monitoring activity in a specific area.

In terms of connectivity, the AXIS 214 PTZ is equipped with Power over Ethernet (PoE), enabling both power and data to be transmitted over a single cable. This simplifies installation and can reduce installation costs, as the need for separate power sources is eliminated.

Axis’s proprietary technologies enhance the AXIS 214 PTZ's functionality. The camera features Axis’ Zipstream technology, which optimizes bandwidth and storage consumption without compromising video quality. This is particularly beneficial for users managing multiple cameras across large facilities, as it helps to efficiently store and retrieve crucial footage.

Moreover, the camera is designed with weather resistance in mind. With an IP66 rating, it can withstand tough environmental conditions, making it suitable for outdoor use. This durability means users can rely on it in various weather scenarios, from rain to extreme temperatures.

In summary, the Axis Communications AXIS 214 PTZ is a feature-rich surveillance solution that combines high-quality imaging, remote control capabilities, efficient power management, and resilient construction. Its advanced functionalities make it an ideal choice for organizations looking to enhance security and monitoring in diverse settings.
Top Page Image Contents