Axis Communications AXIS 214 PTZ user manual Power

Page 57

AXIS 214 PTZ - Technical Specifications 57

Item

Specification

 

 

Processors, memory, clock

• CPU: ETRAX 100LX 32-bit RISC CPU

 

• Video processing and compression: ARTPEC-2

 

• RAM: 32 MB

 

• Flash: 8 MB

 

 

Power

• External power adapter (included): 12V DC, 36W

 

• Via terminal connector: 10.8-13 VDC, max 13W

 

 

Operating conditions

• +5 to +45 ºC (41 to 113 ºF)

 

• Humidity 20 - 80% RH (non-condensing)

 

 

Audio

G.711 PCM 64kbit/s, G.726 ADPCM 32 or 24 kbit/s, full duplex, half duplex,

 

simplex or audio off

 

 

Line/Mic in

3.5mm input for mono microphone, or line-in mono signal (only left channel

 

is used from a stereo signal).

 

Mic input - High sensitivity: max -38 dBu (27 mVpp)

 

Mic input - Low sensitivity: max -32 dBu (54 mVpp)

 

Line/Mic In (mono): max 1.5 dBu (2.6 Vpp)

 

DC power for external microphone supported through the input connector.

 

 

Line out

Mono audio output (line level). Connects to a PA system or active speaker

 

with built-in amplifier. Headphones can also be attached.

 

Line Out: max 1.5 dBu (2.6 Vpp)

 

Line Out impedance: min 32 ohm

 

 

Installation, management

• AXIS IP Utility - Installation tool. Available on CD supplied with product.

and maintenance

• AXIS Camera Management - Tool for installation/management of multiple

 

Axis network video products. Available on CD supplied with product.

 

Web-based configuration.

 

• Configuration backup and restore.

 

• Firmware upgrades over HTTP or FTP over TCP/IP, firmware available at

 

www.axis.com

 

 

Video access from

Camera live view for up to 20 clients, sequence tour capability

Web browser

 

 

 

Minimum web browsing

• Pentium III CPU 500 MHz or higher, or equivalent AMD Athlon Memory

requirements

• 128 MB RAM

 

• AGP graphic card, Direct Draw, 16 MB video memory (32/64 MB

 

recommended for high resolutions/color depths)

 

• Windows XP, 2000, NT4.0*, ME* or 98*

 

• Internet Explorer 5.x or later

 

• For other operating systems and browsers see www.axis.com/techsup

 

* Motion JPEG only

 

 

System integration support

• Powerful API for software integration available at www.axis.com, including

 

HTTP API, AXIS Media Control SDK, event trigger data in video stream,

 

embedded scripting, customized HTML pages

 

• Embedded operating system: Linux 2.4

 

 

Supported protocols

IP, HTTP, HTTPS, SSL/TLS, TCP, ICMP, SNMPv1/v2c/v3 (MIB-II), RTSP, RTP, UDP,

 

IGMP, RTCP, SMTP, FTP, DHCP, UPnP, ARP, DNS, DynDNS, SOCKS, NTP

 

More information on protocol usage available at www.axis.com

 

 

Image 57
Contents Axis 214 PTZ About this Document Table of contents Axis 214 PTZ Index Product Description Status Rear panelAxis 214 PTZ Product Description Accessing the camera Accessing the camera from a browserSetting the password for root Accessing the camera from the Internet Live View Control panel Pan/Tilt/Zoom controlsServer push not available for Microsoft Internet Explorer Viewer controlsQuickTime Java appletStill Image PTZ Control QueueVideo and Audio Streams Video Stream TypesMotion Jpeg MPEG-4 protocols and communication methods Audio Stream TypesHow to stream MPEG-4 Axis Media ControlRTP/RTSP/HTTP or RTP/RTSP/HTTPS Using Motion Jpeg Other methods of accessing the video streamUsing MPEG-4 Other MPEG-4 clientsQuickTime/Windows Media Player Accessing the Audio StreamsAccessing the setup tools from a browser Setup ToolsImage Appearance Video & Image settingsOverlay Image Settings Overlay SettingsGo to Setup Video & Image Overlay Image Video StreamImage Formats Image Size Overlay image requirementsImage Settings Advanced Camera Settings Lighting ConditionsMPEG-4 Enable Audio AudioAudio Channels Audio Output Audio InputNoise canceller threshold value Noise canceller attenuation Advanced Audio SettingsAxis 214 PTZ Audio Live View Config Use custom settingsLayout Own Home Upload Own Web FilesUser Defined Links Check Show Custom LinkPlease use the online help for details Html Examples Preset Positions PTZ ConfigurationSequence Mode Advanced LimitsControl Queue Event Servers Event ConfigurationEvent Types How to set up a triggered eventTriggered Event Click Add triggered on the Event typesPre-trigger and Post-trigger buffers How to set up a scheduled eventScheduled Event Click Add scheduled on the Event typesMotion Detection Configuring Motion DetectionMotion Detection Parameters Port StatusSystem Options Security UsersSecurity IP Address Filter Date & Time Security HttpsServices Network Basic TCP/IP SettingsDNS Configuration Network Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationNetwork Socks NAT Traversal port mappingNetwork Traffic Network Smtp email MaintenanceNetwork Snmp Network UPnPConfiguration SupportAdvanced Using the Control Button Resetting to the factory default settingsInputs and outputs ConnectionsConnecting audio equipment Setup Basic Configuration TroubleshootingChecking the Firmware Updating the FirmwareSupport Using ARP and Ping Symptoms, Possible Causes and Remedial ActionsSnapshot images Poor performance Video compression Technical SpecificationsPower Axis 214 PTZ PAL delivers the following file sizes Optimizing your system General performance considerationsFrame rates MPEG-4 Frame rates Motion JpegBandwidth Glossary of Terms Compression See Image Compression Half-duplex See Full-duplex Axis 214 PTZ Glossary of Terms Rtcp offers quality-of-service feedback from receivers to URL Uniform Resource Locator An address on the network Axis 214 PTZ Glossary of Terms Axis 214 PTZ Index IndexSmtp

AXIS 214 PTZ specifications

Axis Communications, a pioneer in network video solutions, has made significant strides with the release of its AXIS 214 PTZ camera. This robust camera is designed for professional applications requiring remote pan, tilt, and zoom capabilities, providing excellent versatility and control in surveillance scenarios.

One of the standout features of the AXIS 214 PTZ is its ability to deliver high-quality video with a resolution of up to 720x480 pixels. This ensures that users are able to capture clear and detailed footage, which is essential for effective monitoring and incident identification. The camera also has a wide dynamic range, allowing it to perform well in varying lighting conditions, which can often be a challenge in outdoor settings.

The PTZ function allows users to control the camera's movement remotely, making it possible to monitor large areas with just one device. It can pan a full 360 degrees and has a tilt range that enables it to cover a significant vertical span. Coupled with a 10x optical zoom, users can focus in on specific details, whether it be a facial recognition task, reading a license plate, or just monitoring activity in a specific area.

In terms of connectivity, the AXIS 214 PTZ is equipped with Power over Ethernet (PoE), enabling both power and data to be transmitted over a single cable. This simplifies installation and can reduce installation costs, as the need for separate power sources is eliminated.

Axis’s proprietary technologies enhance the AXIS 214 PTZ's functionality. The camera features Axis’ Zipstream technology, which optimizes bandwidth and storage consumption without compromising video quality. This is particularly beneficial for users managing multiple cameras across large facilities, as it helps to efficiently store and retrieve crucial footage.

Moreover, the camera is designed with weather resistance in mind. With an IP66 rating, it can withstand tough environmental conditions, making it suitable for outdoor use. This durability means users can rely on it in various weather scenarios, from rain to extreme temperatures.

In summary, the Axis Communications AXIS 214 PTZ is a feature-rich surveillance solution that combines high-quality imaging, remote control capabilities, efficient power management, and resilient construction. Its advanced functionalities make it an ideal choice for organizations looking to enhance security and monitoring in diverse settings.