Axis Communications AXIS 214 PTZ user manual About this Document

Page 2

About this Document

This manual is intended for administrators and users of the AXIS 214 PTZ PTZ Network Camera, and is applicable for software release 4.30. Previous experience of networking will be of use when installing and using this product. Some knowledge of UNIX or Linux-based systems may also be beneficial, for developing shell scripts and applications. Later versions of this document will be posted to the Axis Website, as required.

Safety Notices Used In This Manual

Caution! - Indicates a potential hazard that can damage the product.

Important! - Indicates a hazard that can seriously impair operation.

Do not proceed beyond any of the above notices until you have fully understood the implications.

Intellectual Property Rights

Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at http://www.axis.com/patent.htm and one or more additional patents or pending patent applications in the US and other countries.

This product contains licensed third-party software. See the menu item “About” in the product’s user interface for more information.

This product contains source code copyright Apple Computer, Inc., under the terms of Apple Public Source License 2.0 (see http://www.opensource.apple.com/apsl/).

The source code is available from: http://developer.apple.com/darwin/projects/bonjour/

Legal Considerations

Video surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

Electromagnetic Compatibility (EMC)

If use of this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a different circuit to the receiver. Consult your dealer or an experienced radio/TV technician for help. Shielded (STP) network cables must be used with this unit to ensure compliance with EMC standards.

USA - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference, in which case the user will be required to correct the interference at his own expense.

Canada - This Class A digital apparatus complies with Canadian ICES-003.

Europe - This digital equipment fulfills the requirements for radiated emission according to limit A of EN55022/1998, and the requirements for immunity according to EN55024/1998 residential, commercial, and industry. Warning! This is a Class A product. In a domestic environment this product may cause radio interference, in

which case the user may be required to take adequate measures.

Japan - This is a class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective action.

Australia - This electronic device meets the requirements of the Radio communications (Electromagnetic Compatibility) Standard 1998 AS/NZS 3548.

Warning! This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

Liability

Every care has been taken in the preparation of this manual. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.

Trademark Acknowledgments

Ethernet, Internet Explorer, Linux, Microsoft, Mozilla, OS/2, UNIX, Wfine, Windows, WWW are registered trademarks of the respective holders. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Axis Communications AB is independent of Sun Microsystems Inc. UPnPTM is a certification mark of the UPnPTM Implementers Corporation. Bonjour is a trademark of Apple Computer Inc.

Support

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

•download user documentation and firmware updates

•find answers to resolved problems in the FAQ database. Search by product, category, or phrases

•report problems to Axis support by logging in to your private support area

•visit Axis Support at www.axis.com/techsup/

Safety Notice - Battery Replacement

The AXIS 214 PTZ uses a 3.0V CR2032 Lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of 5 years. Low battery power affects the operation of the RTC, causing it to reset at every power-up. A log message will appear when the battery needs replacing. The battery should not be replaced unless required!

If the battery does need replacing, please observe the following:

•Danger of Explosion if battery is incorrectly replaced

•Replace only with the same or equivalent battery, as recommended by the manufacturer.

•Dispose of used batteries according to the manufacturer's instructions.

AXIS 214 PTZ User’s Manual Revision 1.0

Part No: 25353r7 August 2006

Copyright© Axis Communications AB, 2005-2006

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Axis 214 PTZ About this Document Table of contents Axis 214 PTZ Index Product Description Rear panel StatusAxis 214 PTZ Product Description Setting the password for root Accessing the cameraAccessing the camera from a browser Accessing the camera from the Internet Live View Pan/Tilt/Zoom controls Control panelQuickTime Viewer controlsServer push not available for Microsoft Internet Explorer Java appletPTZ Control Queue Still ImageMotion Jpeg Video and Audio StreamsVideo Stream Types Audio Stream Types MPEG-4 protocols and communication methodsRTP/RTSP/HTTP or RTP/RTSP/HTTPS How to stream MPEG-4Axis Media Control Using MPEG-4 Other methods of accessing the video streamUsing Motion Jpeg Other MPEG-4 clientsAccessing the Audio Streams QuickTime/Windows Media PlayerSetup Tools Accessing the setup tools from a browserVideo & Image settings Image AppearanceGo to Setup Video & Image Overlay Image Overlay SettingsOverlay Image Settings Video StreamOverlay image requirements Image Formats Image SizeAdvanced Camera Settings Lighting Conditions Image SettingsMPEG-4 Audio Channels Enable AudioAudio Audio Input Audio OutputAdvanced Audio Settings Noise canceller threshold value Noise canceller attenuationAxis 214 PTZ Audio Layout Live View ConfigUse custom settings User Defined Links Upload Own Web FilesOwn Home Check Show Custom LinkPlease use the online help for details Html Examples Sequence Mode PTZ ConfigurationPreset Positions Advanced LimitsControl Queue Event Configuration Event ServersTriggered Event How to set up a triggered eventEvent Types Click Add triggered on the Event typesScheduled Event How to set up a scheduled eventPre-trigger and Post-trigger buffers Click Add scheduled on the Event typesConfiguring Motion Detection Motion DetectionPort Status Motion Detection ParametersSecurity IP Address Filter System OptionsSecurity Users Security Https Date & TimeNetwork Basic TCP/IP Settings ServicesNTP Configuration Network Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationNetwork Traffic Network SocksNAT Traversal port mapping Network Snmp MaintenanceNetwork Smtp email Network UPnPAdvanced ConfigurationSupport Resetting to the factory default settings Using the Control ButtonConnections Inputs and outputsConnecting audio equipment Checking the Firmware TroubleshootingSetup Basic Configuration Updating the FirmwareSupport Symptoms, Possible Causes and Remedial Actions Using ARP and PingSnapshot images Poor performance Technical Specifications Video compressionPower Axis 214 PTZ PAL delivers the following file sizes General performance considerations Optimizing your systemFrame rates Motion Jpeg Frame rates MPEG-4Bandwidth Glossary of Terms Compression See Image Compression Half-duplex See Full-duplex Axis 214 PTZ Glossary of Terms Rtcp offers quality-of-service feedback from receivers to URL Uniform Resource Locator An address on the network Axis 214 PTZ Glossary of Terms Index Axis 214 PTZ IndexSmtp

AXIS 214 PTZ specifications

Axis Communications, a pioneer in network video solutions, has made significant strides with the release of its AXIS 214 PTZ camera. This robust camera is designed for professional applications requiring remote pan, tilt, and zoom capabilities, providing excellent versatility and control in surveillance scenarios.

One of the standout features of the AXIS 214 PTZ is its ability to deliver high-quality video with a resolution of up to 720x480 pixels. This ensures that users are able to capture clear and detailed footage, which is essential for effective monitoring and incident identification. The camera also has a wide dynamic range, allowing it to perform well in varying lighting conditions, which can often be a challenge in outdoor settings.

The PTZ function allows users to control the camera's movement remotely, making it possible to monitor large areas with just one device. It can pan a full 360 degrees and has a tilt range that enables it to cover a significant vertical span. Coupled with a 10x optical zoom, users can focus in on specific details, whether it be a facial recognition task, reading a license plate, or just monitoring activity in a specific area.

In terms of connectivity, the AXIS 214 PTZ is equipped with Power over Ethernet (PoE), enabling both power and data to be transmitted over a single cable. This simplifies installation and can reduce installation costs, as the need for separate power sources is eliminated.

Axis’s proprietary technologies enhance the AXIS 214 PTZ's functionality. The camera features Axis’ Zipstream technology, which optimizes bandwidth and storage consumption without compromising video quality. This is particularly beneficial for users managing multiple cameras across large facilities, as it helps to efficiently store and retrieve crucial footage.

Moreover, the camera is designed with weather resistance in mind. With an IP66 rating, it can withstand tough environmental conditions, making it suitable for outdoor use. This durability means users can rely on it in various weather scenarios, from rain to extreme temperatures.

In summary, the Axis Communications AXIS 214 PTZ is a feature-rich surveillance solution that combines high-quality imaging, remote control capabilities, efficient power management, and resilient construction. Its advanced functionalities make it an ideal choice for organizations looking to enhance security and monitoring in diverse settings.
Top Page Image Contents