Axis Communications AXIS 214 PTZ user manual Pre-trigger and Post-trigger buffers, Scheduled Event

Page 38

38AXIS 214 PTZ - Event Configuration

Pre-trigger and Post-trigger buffers

This function is very useful when checking to see what happened immediately before and after a trigger, e.g. 2 minutes before and after a door has been opened. Check the Upload images checkbox under Event Types > Add Triggered... > When Triggered... to expand the web page with the available options.

Note: Buffer size - up to 9 MB buffer. The maximum length of time of the pre-/post-buffer depends on the image size and selected frame rate.

Include pre-trigger buffer - images stored internally in the server from the time immediately preceding the trigger. Check the box to enable the pre-trigger buffer, enter the desired length of time and specify the required image frequency.

Include post-trigger buffer - contains images from the time immediately after the trigger. Configure as for pre-trigger.

Note: If the pre- or post-buffer is too large for the internal memory, the frame rate will be reduced and individual images may be missing. If this occurs, an entry will be created in the unit's log file.

Continue image upload (unbuffered) - enable the upload of images for a fixed length of time. Specify the length of time for the uploaded recording, in seconds, minutes or hours, or for as long as the trigger is active. Finally, set the desired image frequency to the maximum (the maximum available) or to a specified frame rate. The frame rate will be the best possible, but might not be as high as specified, especially if uploading via a slow connection.

Scheduled Event

A Scheduled event can be activated at pre-set times, in a repeating pattern on selected weekdays.

How to set up a scheduled event

This example describes how to set the AXIS 214 PTZ to send an email notification with saved images from a set time:

1.Click Add scheduled on the Event types page.

2.Enter a descriptive name for the event, e.g. Scheduled email.

3.Set the Priority (High, Normal or Low).

4.Set the Activation Time parameters (24h clock) when the event is to be active, e.g. start on Fridays at 18.00 with a duration of 62 hours.

5.Set the When Activated... parameters i.e. set what the AXIS 214 PTZ is to do at the specified time e.g. send uploaded images to an email address.

6.Click OK to save the Event in the Event Types list.

Please see the online help for descriptions of each available option.

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Axis 214 PTZ About this Document Table of contents Axis 214 PTZ Index Product Description Rear panel StatusAxis 214 PTZ Product Description Setting the password for root Accessing the cameraAccessing the camera from a browser Accessing the camera from the Internet Live View Pan/Tilt/Zoom controls Control panelQuickTime Viewer controlsServer push not available for Microsoft Internet Explorer Java appletPTZ Control Queue Still ImageMotion Jpeg Video and Audio StreamsVideo Stream Types Audio Stream Types MPEG-4 protocols and communication methodsRTP/RTSP/HTTP or RTP/RTSP/HTTPS How to stream MPEG-4Axis Media Control Using MPEG-4 Other methods of accessing the video streamUsing Motion Jpeg Other MPEG-4 clientsAccessing the Audio Streams QuickTime/Windows Media PlayerSetup Tools Accessing the setup tools from a browserVideo & Image settings Image AppearanceGo to Setup Video & Image Overlay Image Overlay SettingsOverlay Image Settings Video StreamOverlay image requirements Image Formats Image SizeAdvanced Camera Settings Lighting Conditions Image SettingsMPEG-4 Audio Channels Enable AudioAudio Audio Input Audio OutputAdvanced Audio Settings Noise canceller threshold value Noise canceller attenuationAxis 214 PTZ Audio Layout Live View ConfigUse custom settings User Defined Links Upload Own Web FilesOwn Home Check Show Custom LinkPlease use the online help for details Html Examples Sequence Mode PTZ ConfigurationPreset Positions Advanced LimitsControl Queue Event Configuration Event ServersTriggered Event How to set up a triggered eventEvent Types Click Add triggered on the Event typesScheduled Event How to set up a scheduled eventPre-trigger and Post-trigger buffers Click Add scheduled on the Event typesConfiguring Motion Detection Motion DetectionPort Status Motion Detection ParametersSecurity IP Address Filter System OptionsSecurity Users Security Https Date & TimeNetwork Basic TCP/IP Settings ServicesNTP Configuration Network Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationNetwork Traffic Network SocksNAT Traversal port mapping Network Snmp MaintenanceNetwork Smtp email Network UPnPAdvanced ConfigurationSupport Resetting to the factory default settings Using the Control ButtonConnections Inputs and outputsConnecting audio equipment Checking the Firmware TroubleshootingSetup Basic Configuration Updating the FirmwareSupport Symptoms, Possible Causes and Remedial Actions Using ARP and PingSnapshot images Poor performance Technical Specifications Video compressionPower Axis 214 PTZ PAL delivers the following file sizes General performance considerations Optimizing your systemFrame rates Motion Jpeg Frame rates MPEG-4Bandwidth Glossary of Terms Compression See Image Compression Half-duplex See Full-duplex Axis 214 PTZ Glossary of Terms Rtcp offers quality-of-service feedback from receivers to URL Uniform Resource Locator An address on the network Axis 214 PTZ Glossary of Terms Index Axis 214 PTZ IndexSmtp

AXIS 214 PTZ specifications

Axis Communications, a pioneer in network video solutions, has made significant strides with the release of its AXIS 214 PTZ camera. This robust camera is designed for professional applications requiring remote pan, tilt, and zoom capabilities, providing excellent versatility and control in surveillance scenarios.

One of the standout features of the AXIS 214 PTZ is its ability to deliver high-quality video with a resolution of up to 720x480 pixels. This ensures that users are able to capture clear and detailed footage, which is essential for effective monitoring and incident identification. The camera also has a wide dynamic range, allowing it to perform well in varying lighting conditions, which can often be a challenge in outdoor settings.

The PTZ function allows users to control the camera's movement remotely, making it possible to monitor large areas with just one device. It can pan a full 360 degrees and has a tilt range that enables it to cover a significant vertical span. Coupled with a 10x optical zoom, users can focus in on specific details, whether it be a facial recognition task, reading a license plate, or just monitoring activity in a specific area.

In terms of connectivity, the AXIS 214 PTZ is equipped with Power over Ethernet (PoE), enabling both power and data to be transmitted over a single cable. This simplifies installation and can reduce installation costs, as the need for separate power sources is eliminated.

Axis’s proprietary technologies enhance the AXIS 214 PTZ's functionality. The camera features Axis’ Zipstream technology, which optimizes bandwidth and storage consumption without compromising video quality. This is particularly beneficial for users managing multiple cameras across large facilities, as it helps to efficiently store and retrieve crucial footage.

Moreover, the camera is designed with weather resistance in mind. With an IP66 rating, it can withstand tough environmental conditions, making it suitable for outdoor use. This durability means users can rely on it in various weather scenarios, from rain to extreme temperatures.

In summary, the Axis Communications AXIS 214 PTZ is a feature-rich surveillance solution that combines high-quality imaging, remote control capabilities, efficient power management, and resilient construction. Its advanced functionalities make it an ideal choice for organizations looking to enhance security and monitoring in diverse settings.
Top Page Image Contents