| AXIS 241Q/241S - Using AXIS 241Q/241S 11 |
Notes: | • To view streaming video in Microsoft Internet Explorer, set your web browser to allow |
| the installation of AXIS Media Control (AMC) on your computer. AMC also provides an |
| |
| an |
| disabled the installation of the decoder, as a license is required for each instance. See page |
| 25 for more information. |
•If your workstation restricts the use of additional software components, the AXIS 241Q/241S can be configured to use a Java applet for updating JPEG images. Please see the online help for more information.
•When using a browser other than Microsoft Internet Explorer with AMC, instead of a stop, a snapshot and a full screen button, there is a stop and play button in the bottom left corner of the live view page. For a description of these buttons see The Live View page, below.
The Live View page
If your AXIS 241Q/241S has been customized to meet specific requirements, the buttons and other items described below may or may not be displayed on the Live View page. The following provides an overview of each available button:
The Video Format
The Output buttons control an output directly from the Live View page. These buttons are configured under Setup > Live View Config > Layout.
Pulse - click this button to activate the port for a defined period of time, such as to switch on a light for 20 seconds.
Active/Inactive - click these buttons to manually start and stop a connected device, such as to switch a light on/off.
These buttons start/stop the Sequence Mode. This mode is created in Setup > Live View Config > Sequence mode and automatically displays the view from two or more video sources at set intervals.
The trigger buttons trigger an event directly from the Live View page. These buttons are configured under Setup > Live View Config > Layout. Click these buttons to manually start and stop events.
Use the Snapshot button to capture a snapshot of the image currently displayed in the window.