30AXIS 241Q/241S - Event configuration
Camera tampering
The camera tampering application generates an alarm whenever the camera is repositioned, or when the lens is covered, sprayed, or severely defocused.
You must create an event, (see How to set up a triggered event, on page 28, for the camera to send an alarm.
Motion detection
In the Motion Detection menu, you can configure the video source(s) for motion detection. The motion detection feature is used to generate an alarm whenever movement occurs (or stops) in the image. AXIS 241Q/241S can use up to 10 motion detection windows.
•Include windows target areas where movement is detected.
•Exclude windows target areas within an Include window where movement is ignored.
Once configured, the motion detection windows will appear in a list when motion detection is selected to trigger an event. See How to set up a triggered event, on page 28.
Note: Using the motion detection feature may decrease overall performance in the video server.