46AXIS 241Q/241S - System options
RS485 - The COM ports on the AXIS 241Q/241S supports several operational modes listed on this page. For more information, please see COM ports
Maintenance
•Restart - The unit is restarted without changing any of the settings. Use this method if the unit is not behaving as expected.
•Restore - The unit is restarted and most current settings are reset to factory default val- ues. The settings that are not affected are:
•the boot protocol (DHCP or static)
•the static IP address
•the default router
•the subnet mask
•the system time
•Default - The default button should be used with caution. Pressing this will return all of the video server's settings to the factory default values (including the IP address)
•Upgrade Server - See Upgrading the firmware, on page 53.
•Backup - To take a backup of all of the parameters, and any
•Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore button. The settings will be restored to the previous configuration.
Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for
Support
Support Overview
The support overview page provides valuable information on troubleshooting and contact information, should you require technical assistance.
System Overview
The System Overview provides a summary of the status of the video server.
Logs & Reports
When contacting Axis support, please be sure to provide a valid Server Report with your query. The Access Log is automatically included in the server report.
Information
This page gives you access to the following log files and reports that may prove useful when troubleshooting a problem or when contacting the Axis support web.