Samsung SNV-5080, SNB-5000, SND-5080F, SNB5000 user manual Panning Tilting Lens rotation

Page 31

3.Drill holes (diameter 5mm, more than 35mm deep) on the ceiling by matching to the holes on the case bed, and insert plastic anchors (HUD 5) fully into the holes. Fix the case bed on the ceiling by using Tapping Screws (TH M4xL30). (4 places)

4.Connect power and video cables and arrange cable running not to damage or squeeze them, and assemble the camera unit in the reverse way.

5.Adjust the lens aiming to your desired direction.

6.Assemble the Dome Cover.

For waterproof purpose, ﬁx and secure the bolt using L-wrench provided.

M For the wall mounting installation and how to connect the alarm cables, refer to the installation instructions of SND-5080F. (pages 26~27)

Adjusting the monitoring direction for the camera (SND-5080/SND- 5080F/SNV-5080)

M INSTALLATION & CONNECTION

Panning

Tilting

Lens rotation

You can adjust the camera direction only when the camera is fixed on the ceiling. Then, turning the camera to the left or right is referred to as "Panning", while tilting the angle is "Tilting". For panning, the panning limit is 220° for the clockwise, and 120° for the counterclockwise, a total of 340° enabled; further rotation is stopped by the stopper.

English _31

Image 31

Contents Network Camera SNB-5000/SND-5080/SND-5080F/SNV-5080 Overview Important Safety InstructionsRisk of Electric Shock Do not Open Explanation of Graphical SymbolsDisconnection Device Do not block any ventilation openings Do not place this apparatus nearOverview Contents Installing Silverlight Runtime How to use the Menu Key Camera Menu SetupConnecting to the Camera LoginRecomended PC Specifications Product FeaturesVideo Memory 128MB or higher Model Name WHAT’S IncludedLens Options not included CS Lens Model NameCamera SNB-5000 Description ConnectorAT a Glance SNB-5000 Front SideRear Side PowerSystem GND AlarmAppearance AT a Glance SND-5080SD Memory Card Compartment for the SD memory card Alarm In / OutInside TerminalsComponents AT a Glance SND-5080F Inside Components AT a Glance SNV-5080 Alarm OUT Components Precautions before installation Installation SND-5080Installing the camera Installation & Connection Removing the dome cover Installation SND-5080FCeiling Mount To add an alarm cable Disassembling Installation SNV-5080Pole Mount ADAPTORSCX-300PM Optional Accessories for InstallationInstalling on the ceiling directly Panning Tilting Lens rotation Mounting the C lens Disconnect the power before proceedingMounting the Lens Mounting the CS lensInserting an SD Memory Card Connecting the Auto Iris Lens connectorFocusing INSERTING/REMOVING AN SD Memory CardRemoving an SD Memory Card English Memory Card Use What is a memory card?Memory Card Information not Included Selecting a memory card that’s suitable for youPower Network Monitor Out Connecting with Other DevicePower Supply Connecting to the monitorEthernet Connection Connecting to Audio Input/Output 5mA sink Alarm I/O Wiring Diagram3 4 Connecting to the I/O port boxConnecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingLocal Network  For setting the network type, refer to Interface. Connecting the Camera Directly to a Pppoe Modem IP Router Buttons used in IP Installer IP Address SetupManual Network Setup Static IP SetupURL Network connection and setup Http Port 10000 VNP Port 4520 4530 Auto Network SetupIf the IP router has more than one camera connected Category Camera #1 Camera #2Dynamic IP Environment Setup Dynamic IP SetupManual Port Range Forwarding Port Range Forward Port Mapping SetupConnecting to the Camera from a Remote PC VIA the Internet Connecting to the Camera from a Shared Local PCEnter Ö / Ö / Ö Enter Move to Ssdr and select on HOW to USE the Menu KEYCamera Menu Setup Ssdr Samsung Super Dynamic Range SetupWhite Balance Setup Set the BLC Level Custom Backlight SetupTone HLC Highlight Compensation SetupBrightness Exposure SetupSENS-UP Automatically senses Screen Display SetupSelect CAM Title When done, select END To cancel your input, select CLR Select POS and specify where to display the camera titleOSD Color Duration Adjust the brightness Day/Night Mode SetupImage Adjustment Normally, you would Connecting to the CameraUsing URL Login dialog should appearTo check the Ddns address LoginInstalling Silverlight Runtime English Using the Live Screen To toggle the microphone sound Using OSD Screen MenuTo capture the snapshot To toggle the audio soundClick Save Screenshot will be saved in the speciﬁed path PlaybackClick the About button To check the information of the searched videoTo back up the searched video To download SlimPlayerAudio & Video Setup SetupVideo Profile To add a video profile What is GOP size?Video Setup Audio Setup Network SetupInterface Ddns PortSSL IP FilteringRegistering with Ddns FTP/Email Event SetupSD Record Alarm Input Video analysis English Time Schedule Click OK When done, click ApplySpecify the Transfer interval Product Information System SetupDate & Time User Upgrade/RebootFrom the Setup menu, select System tab Click User Change the current password for the administratorTo restore the backup settings, click Restore Log Select a backup ﬁle and click OpenSsnriii Camera SpecificationItems SNB-5000 PowerDimensions Net Weight NetNetwork Specification Ddns TCP/IP, HTTP, HTTPS, SSL, DhcpProblem Solution TroubleshootingVideo analysis setting Verify the settings in the following sequenceCheck Data & Time settings Alarm Video Transmission must be enabledWe protect your rights with two steps GPL/LGPL Software LicensePreamble GPL Software Linux kernel, busyboxOriginal authors reputations Page Page Fitness for a Particular Purpose How to Apply These Terms to Your New ProgramsAdditional Deﬁnitions See the GNU General Public License for more detailsConveying Modiﬁed Versions Exception to of the GNU GPLƒ d Do one of the following Revised Versions of the GNU Lesser General Public License Combined LibrariesLicense ever published by the Free Software Foundation Sales Network