setup screen
Video Setup
1.From the Setup menu, select the
<Audio & Video ( 
)> tab.
2.Click <Video Setup>.
3.Select a <Video Source> mode.
y Flip Mode : Turn upside down the image that is captured by the camera.
y Mirror Mode : Flip horizontal the
image that is captured by the camera.
4.Click the input box of each item in
<Privacy Area Configuration> and enter / select a desired value.
You can set up to 12 privacy zones.
5.Set the <Video Output>.
–If you select <OFF>, the video signal will not be output via the VIDEO OUT port.
6.When done, click [Apply].
To set the privacy zone
You can specify a certain area of the camera video to be protected for your privacy.
1.Set it to <Enable>.
2.Place the cursor at a point in the video and drag it to whatever you need.
3.Specify the <Color> that will fill the privacy area.
4.To cancel your selection, simply click [Clear].
5.When done, click [Apply].