To add a video profile
You can add as many codec as necessary so that a variety of profiles can be applied according to the recording condition.
1.Select a profile number.
2.Provide the name and select a codec.
3.Specify the conditions under which the codec will be applied.
4.Specify the details of the selected codec including resolution and frame rate. y Resolution : Set the video size of the MPEG4, H.264, and MJPEG files. y Framerate : Specify the frame rate.
y Compression : Specify the compression rate of the video.
y Bitrate control : You can select either the fixed bit rate or the variable one for the compression type.
If you set the resolution to 1280X1024, the maximum frame rate is 22 fps.
yTarget bitrate : Specify the bit rate at which you will transfer the video.
yEncoding priority : You can set the video transfer method to Framerate or Compression.
yGOP size : Select a GOP size between 1 and 15.
yProfile : The H.264 profiling method is fixed to <HIGH>.
yEntropy coding : Reduce the possible compression loss due to encoding.
yMulticast (VNP) : Specify the use of the VNP protocol.
-IPv4 : Enter an IPv4 address with which you can connect to the IPv4 network.
-Port : Specify the video communication port.
-TTL : Set the TTL for the VNP packet.
yMulticast (RTP) : Specify the use of the RTP protocol.
-IPv4 : Enter an IPv4 address with which you can connect to the IPv4 network.
-Port : Specify the video communication port.
-TTL : You can set the TTL for the RTP packet.
What is GOP size?
GOP (Group of Pictures) is a set of video frames for MPEG4 and H.264 format compression, indicating a collection of frames from the initial
You can set between 1 and 15 for the MPEG4 and H.264 CODEC.
M SETUP SCREEN