network connection and setup
3.In the <Address> pane, provide the necessary information.
MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually.
If using an IP router
yIP Address : Enter an address falling in the IP range provided by the IP router. ex) 192.168.1.2~254,
192.168.0.2~254,
192.168.XXX.2~254
ySubnet Mask : The <Subnet Mask> of the IP router will be the <Subnet Mask> of the camera.
yGateway : The <Local IP Address> of
the IP router will be the <Gateway> of the camera.
M The settings may differ depending on the connected IP router model. For more information, refer to the user manual of the applicable router.
If not using an IP router :
For setting <IP Address>, <Subnet Mask>, and <Gateway>, contact your network administrator.
4.In the <Port> pane, provide necessary information.
y HTTP Port : Used to access the camera using the Internet browser, defaulted to 80. Use the spin button to change the HTTP Port value.
y VNP Port : Used to control the video signal transfer, defaulted to 4520.
5.Enter the password.
This is the login password for the "admin" user who accesses the camera. The default password is "4321".
6.Click [OK].
Manual network setup will be completed.
7.When the manual setup including <IP> is completed, the camera will restart.
48_ network connection and setup