Audio Setup
You can configure the I/O settings of the audio source from the camera.
1.From the Setup menu, select the
<Audio & Video ( 
)> tab.
2.Click <Audio Setup>.
3.Adjust the audio I/O levels to your preference.
y
y Audio - Out : Set the audio output value.
4.When done, click [Apply].
NETWORK SETUP
Interface
1.From the Setup menu, select the
<Network ( 
)> tab.
2.Click <Interface>.
3.Set the <Interface> and <IPv6 Setup> as necessary.
y IP Type : Select an IP connection type.
-Manual : Specify the IP address, Subnet Mask, Gateway, DNS1, and DNS2.
-PPPoE : Specify the DNS1, DNS2, ID and password.
-DHCP : Specify the DNS1 and DNS2.
If you set it to <Manual>, you should specify the IP, Subnet Mask, Gateway, DNS 1 & 2 manually.
yMAC Address : Shows the MAC address.
yIP Address : Displays the current IP address.
ySubnet Mask : Displays the <Subnet Mask> for the set IP.
yGateway : Displays the <Gateway> for the set IP.
yDNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
yIPv6 Use : Specify the use of IPv6.
yIPv6 Address : Obtains the IPv6 address to access the IPv6 network.
4.When done, click [Apply].
M SETUP SCREEN