Samsung SNC-C7225, SNC-C6225 Motion Setup, Privacy Zone Area Setup, Privacy Zone Size Adjustment

Sets if camera makes mask shows or not on images.

Deletes data in the selected mask NO.

❖Privacy Zone Area Setup

EDIT MASK 1

MOVE TO TARGET POSITION [ENTER : SELECT]

0/0/x1/N

Move camera to area to mask. Then the menu to adjust mask size will be displayed.

❖Privacy Zone Size Adjustment

EDIT MASK 1

[◄►:ADJUST MASK WIDTH] [▲▼:ADJUST MASK HEIGHT] [ENTER : SELECT]

Adjust mask size. Use joystick or arrow buttons to adjust mask size.

To hide a certain zone completely regardless of high speed PT motions, it is recommended that the size of mask must be 20% bigger than original target size.

It is noted that during PAN/TILT control like jog action, the object behind the privacy mask can be disclosed in a short period of time.

MOTION SETUP

<PARKING ACTION SETUP>

BACK

EXIT

Setup the general functions of Pan/Tilt motions.

If Preset Lock is set to ON, it is impossible to set up and delete Preset. It is possible only to run those functions. To set up and delete those functions, enter into OSD menu.

• PWR UP ACTION [ON/OFF]

Refer to “Other Functions”(page 23) section.

Refer to “Other Functions”(page 23) section.

• JOG MAX SPEED [2°/sec ~200°/sec]

Sets maximum jog speed. Jog speed is inversely proportional to ratio of zoom. As zoom magnifi cation goes up, pan/tilt speed goes down.

• JOG DIRECTION [INVERSE/NORMAL]

If you set this to ‘Normal’, the view in the screen is moving same direction with jog tilting. If ‘Inverse’ is selected, the view in the screen is moving reversely.

At start point of preset movement, camera starts freezing the image of start point. Camera keeps displaying the image of start point during preset movement and does not display the images which camera gets during preset movement. As soon as camera stops at preset end point, camera starts displaying live images which it gets at preset end point.