Samsung SNC-C6225, SNC-C7225 user manual FCC Statement

Page 3

safety information

12.Do not expose the product to the direct airfl ow from an air conditioner.

Otherwise, it may cause moisture condensation inside the Clear Dome due to temperature difference between internal and external of the dome camera.

13.If you install this product in a low-temp area such as inside a cold store, you must seal up the wiring pipe with silicon, so that the external air can not fl ow inside the housing.

Otherwise, external high, humid air may fl ow inside the housing, pooling moisture or vapor inside the product due to a difference between internal and external temperature.

CAUTION

1.Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference.

2.Do not install in a location subject to high temperature (over 140°F), low temperature (below -49°F), or high humidity. Doing so may cause fi re or electric shock.

3.If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

4.Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause fi re or damage to the product.

5.Keep out of direct sunlight and heat radiation sources. It may cause fi re.

6.Install it in a place with good ventilation.

7.Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor.

8.Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the apparatus.

9.The Mains plug is used as a disconnect device and shall stay readily operable at any time.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :

1)This device may not cause harmful interference, and

2)This device must accept any interference received including interference that may cause undesired operation.

Caution

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a com- mercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

IC Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian Interference.-Causing Equipment Regulations of ICES-003.

English – 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 10x Network Mini Smart Dome Camera Safety information FCC Statement Important safety instructions Contents Contents Introduction FeaturesRecommended PC Specifications Compatible IP RoutersLinksys Netgear Product Main Body Product & AccessoriesAccessories SNC-C6225SNC-C7225 Parts Name & Functions Fixes main unit brackets like surface, wall, and ceiling Communication Protocol Setup InstallationDIP Switch Setup Camera ID SetupRS-485 Termination Resistor Installation Using Surface Mount on the CeilingInstallation Using Ceiling Mount Bracket Installation Using Wall Mount Bracket RS-485 Communication Power ConnectionCabling SNC-C6225/SNC-C7225Internal Alarm Input ConnectionVideo Connection Audio Input/Ouput ConnectionINSERTING/REMOVING AN Micro Sdhc Memory Card Inserting an Micro Sdhc Memory CardRemoving an Micro Sdhc Memory Card What is a memory card? Memory Card Information not IncludedSelecting a memory card that’s suitable for you Operation Preset Auto PANPattern Flip ScanSchedule Other FunctionsPattern × SET Preset ×××OSD Display of Main Screen General Rules of KEY Operation for MenuFunction Setup How to use osd menuStructure of the Setup Menu System Information Display Setup Motion SetupCamera Setup System SetupSystem Initialize System Information Display SetupPrivacy Zone Mask Setup Main MenuMotion Setup Privacy Zone Area SetupPrivacy Zone Size Adjustment Parking Action Setup Function SetupPreset Setup Edit Preset SceneEdit Preset Label Pattern Setup Auto PAN SetupScan Setup Edit PatternEdit Scan Action no NONE/PRESET/AUTO PAN/PATTERN Set up items such as Action NO., Dwell and OPTOPT Edit Schedule Schedule SetupCamera Setup White Balance SetupAuto Exposure Setup System Setup FAN RUN Temp SET Home PositionSET North Direction LanguageInitial Configuration Table System InitializeSNC-C6225 XDSL or Cable Modem IP Router Network connection & setupNetwork connection and setup processes are given as follows IP address Subnet Mask Default GatewaySetting the IP address IP Router Connecting to the camera from an IP router external PC Connecting to the camera from a remote PC Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingSearching for the Camera IP Installer screen layoutManual Network Setting Setting static ipDevice Port a port used to control video transmission. If more than one camera are connected to an IP RouterEnter your password Automatic Network SettingExamples of using Dynamic IP Setting dynamic ipDynamic IP Setting Port Forwarding Port Mapping SettingHttp//e30002c.websamsung.net10000 Login window appears Using the cameraConnecting to the Camera Connecting to the cameraChecking the Ddns address Installing ActivexConnecting to the camera using the IP Installer program For Windows XP Service PackLogging to the camera Main Screen Web viewerPower PTZ Using the CameraTo Record a Video At desired scene, click the Record button Is startedTo stop a recording, click the Record button once again Schedule Using the SD Search Viewer ScreenAlarm Input You can select the desired time to search the alarm eventsSetup Setup toolSetting the Camera Setup Screen LayoutVideo & Audio Configuration IP Address IPv6 EnableIP Type MAC AddressUser LanguageDigital Image Stabilizer Software Update DATE/TIMELOG Reset Transfer SetupHttps Record Setup Alarm Input Setup Alarm Image SetupMotion Sensitivity MotionFunction ConfigurationStreaming Protocol Streaming SetupSchedule Transfer Function Transfer IntervalDdns Snmp Snmp User SetupProblem Solution TroubleshootingAppendix CCD SNC-C6225N/PDetails SNC-C7225N/PLevel Ntsc PALDimension Unit mmPipe Thread Unit mm Wall Mount Bracket Rev

SNC-C7225, SNC-C6225 specifications

The Samsung SNC-C6225 and SNC-C7225 are advanced network cameras designed for professional surveillance applications, showcasing cutting-edge technology and features to meet diverse security needs. Both models are highly regarded for their superior image quality, robust design, and innovative functionalities that provide reliable performance in various environments.

The SNC-C6225 is equipped with a 1/3-inch CCD image sensor, offering a resolution of up to 600 TV lines. This enables it to capture high-quality video footage with exceptional clarity and detail, making it an ideal choice for monitoring areas that require close scrutiny. It supports day/night functionality, allowing the camera to automatically switch between color and monochrome modes based on ambient light. This feature is crucial for 24/7 surveillance, ensuring optimal visibility regardless of lighting conditions.

In contrast, the SNC-C7225 features an advanced 1/3-inch progressive scan CMOS sensor, which provides superior low-light performance and can capture video at a resolution of up to 720p HD. This camera takes advantage of wide dynamic range (WDR) technology to deliver clear images even in challenging lighting scenarios, such as scenes with strong backlighting or glare. The SNC-C7225's enhanced frame rate allows for smooth playback, making it easier to track fast-moving subjects or activities.

Both models offer versatile networking capabilities, supporting IP video transmission over Ethernet, which simplifies installation and integration into existing security systems. They feature Power over Ethernet (PoE) support, enabling single-cable installation for power and data transmission. This not only reduces the complexity of wiring but also enhances placement flexibility.

The cameras come equipped with a variety of intelligent video analytics features, including motion detection, tampering detection, and face detection. These capabilities enhance operational efficiency by allowing for proactive monitoring and management of security events. With remote access and control, users can easily manage the cameras through web browsers or dedicated applications, facilitating quick responses to incidents.

Durability is a key characteristic of both the SNC-C6225 and SNC-C7225. With weather-resistant housings and a wide operating temperature range, these cameras are built to withstand harsh environmental conditions, making them suitable for both indoor and outdoor installations.

In summary, Samsung's SNC-C6225 and SNC-C7225 network cameras offer state-of-the-art surveillance technology characterized by high-resolution imaging, robust design, and intelligent features. Their advanced capabilities make them excellent choices for businesses and organizations looking to enhance security and monitor their premises effectively.
Top Page Image Contents