setup tool
DATE/TIME
❖Current System Time
•Shows the time according to the setting of System Time Setup.
❖System Time Setup
•You can set the time synchronized with NTP server (Time Server) or PC, or manually setup.
(Ú The date can be confi gured between 1 January 2000 and 31 December 2037)
–NTP Server IPs are provided by a public agency and their list is therefore subject to change.
–In a local network, a separate NTP server must be manually defi ned.
–The current time can vary depending on the computers regional (GMT and DST) and country (PC time confi guration) settings.
LOG
❖System Log List
•Shows the log information about the system changes along with time and IP address.
–User Log In : Shows current camera login user.
–Video Confi guration Change : Show video setting changes.
–System Time Change : Shows time changes.
–System Start : Shows time when the camera is turned on.
M Up to 2000 logs can be recorde.
If the log number is over 2000, a log in the bottom of log list will be deleted and added new log information.
SOFTWARE UPDATE
❖Current Version
•Shows the current fi rmware version.
❖How to upgrade
•Click [Browse…] button and select the latest version of the fi rmware. Its fi le name should be ex)
•Click [Install] button. The fi le is uncompressed and the software update begins. Software update may take tens of minutes. To cancel an update, click the [CANCEL] button.
•When the software update is done, the system will automatically restart. Since the current connection is disconnected, you have to connect to the system again.
M Since, if the network is disconnected, the power fails or the PC abnormally operates during a software update, the system may not work afterwards. Care must be taken not to cause a problem during an update.
English – 61