Samsung SNC-C7225, SNC-C6225 user manual Preset Setup, Edit Preset Scene, Edit Preset Label

Page 30

how to use osd menu

PRESET SETUP

PRESET SETUP

 

PRESET NO.

1

<EDIT SCENE>

 

<LABEL>

 

CLR PRESET

CANCEL

CAM ADJUST

GENERAL

ALARM OUT

----

BACK

EXIT

• PRESET NO.

[1~128]

If a selected preset is already defi ned, camera moves to pre-defi ned position and preset characteristics such as Label and Relay Outputs show on monitor. If a selected preset is not defi ned, “UNDEFINED” shows on monitor.

EDIT PRESET SCENE

Redefi ne current Preset scene position (i.e. PTZ).

EDIT PRESET LABEL

Edits Label to show on monitor when preset runs. Max. 10 alphabets are allowed.

• CLR PRESET

[CANCEL/OK]

Delete current Preset data

• CAM ADJUST

[GENERAL/SPECIAL]

WB(White Balance) and AE(Auto Exposure) can be set up independently for each preset. There are 2 modes, “GENERAL” mode & “SPECIAL” mode. The General mode means that WB or AE can be set up totally and simultaneously for all presets in “CAMERA SETUP” menu.

The Special mode means that WB or AE can be set up independently or separately for each preset in each preset setup menu. Each Special WB/AE value should activate correspondingly when camera arrives at each preset location. During jog operation, General WB/AE value should be applied.

All Special WB/AE value should not change although General WB/AE value changes. If “SPECIAL” is selected, Menu to set WB/AE shows on monitor.

ALARM OUT

Relay Output can be linked with Preset run.

The character “-” means disable while the number “1” representing each bit means ON.

ex) If it is set to “1”, Output relay will be ON whenever you call this Preset.

Edit Preset Scene

EDIT SCENE - PRESET 1

MOVE TO TARGET POSITION [ENTER : SELECT]

0/0/x1/N

cUsing joystick, move camera to desired position.

dBy pressing ENTER key, save current PTZ data.

Edit Preset Label

LABEL - PRESET 1

[█]

----------

1234567890 OK ABCDEFGHIJ CANCEL KLMNOPQRST UVWXYZabcd efghijklmn opqrstuvwx yz<>-/:.

cEdits label to show on monitor when camera arrives at presets. In Edit Label menu, a reverse rectangular is cursor. As soon as fi nishing selecting alphabet, cursor moves to the next digit.

 [

 

]

Current Cursor Position

dUsing Left/Right/Up/Down of joystick, move to an appropriate character from the Character set. To choose that character, press the ENTER key.

30 – 10x Network Mini Smart Dome Camera

Image 30
Contents 10x Network Mini Smart Dome Camera Safety information FCC Statement Important safety instructions Contents Contents Features IntroductionRecommended PC Specifications Compatible IP RoutersLinksys Netgear SNC-C6225 Product & AccessoriesAccessories Product Main BodySNC-C7225 Parts Name & Functions Fixes main unit brackets like surface, wall, and ceiling Camera ID Setup InstallationDIP Switch Setup Communication Protocol SetupInstallation Using Surface Mount on the Ceiling RS-485 Termination ResistorInstallation Using Ceiling Mount Bracket Installation Using Wall Mount Bracket SNC-C6225/SNC-C7225 Power ConnectionCabling RS-485 CommunicationAudio Input/Ouput Connection Alarm Input ConnectionVideo Connection InternalINSERTING/REMOVING AN Micro Sdhc Memory Card Inserting an Micro Sdhc Memory CardRemoving an Micro Sdhc Memory Card What is a memory card? Memory Card Information not IncludedSelecting a memory card that’s suitable for you Operation Preset Auto PANPattern Other Functions ScanSchedule FlipGeneral Rules of KEY Operation for Menu SET Preset ×××OSD Display of Main Screen Pattern ×System Information Display Setup Motion Setup How to use osd menuStructure of the Setup Menu Function SetupCamera Setup System SetupSystem Initialize Main Menu Display SetupPrivacy Zone Mask Setup System InformationMotion Setup Privacy Zone Area SetupPrivacy Zone Size Adjustment Function Setup Parking Action SetupPreset Setup Edit Preset SceneEdit Preset Label Auto PAN Setup Pattern SetupScan Setup Edit PatternEdit Scan Action no NONE/PRESET/AUTO PAN/PATTERN Set up items such as Action NO., Dwell and OPTOPT Schedule Setup Edit ScheduleCamera Setup White Balance SetupAuto Exposure Setup System Setup Language SET Home PositionSET North Direction FAN RUN TempSystem Initialize Initial Configuration TableIP address Subnet Mask Default Gateway Network connection & setupNetwork connection and setup processes are given as follows SNC-C6225 XDSL or Cable Modem IP RouterSetting the IP address IP Router Connecting to the camera from an IP router external PC Connecting to the camera from a remote PC Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LANIP Installer screen layout Searching for the CameraSetting static ip Manual Network SettingIf more than one camera are connected to an IP Router Device Port a port used to control video transmission.Automatic Network Setting Enter your passwordPort Forwarding Port Mapping Setting Setting dynamic ipDynamic IP Setting Examples of using Dynamic IPConnecting to the camera Using the cameraConnecting to the Camera Http//e30002c.websamsung.net10000 Login window appearsFor Windows XP Service Pack Installing ActivexConnecting to the camera using the IP Installer program Checking the Ddns addressLogging to the camera Web viewer Main ScreenUsing the Camera Power PTZTo Record a Video At desired scene, click the Record button Is startedTo stop a recording, click the Record button once again You can select the desired time to search the alarm events Using the SD Search Viewer ScreenAlarm Input ScheduleSetup Screen Layout Setup toolSetting the Camera SetupVideo & Audio Configuration MAC Address IPv6 EnableIP Type IP AddressUser LanguageDigital Image Stabilizer Software Update DATE/TIMELOG Reset Transfer SetupHttps Record Setup Alarm Image Setup Alarm Input SetupConfiguration MotionFunction Motion SensitivityTransfer Interval Streaming SetupSchedule Transfer Function Streaming ProtocolDdns Snmp User Setup SnmpTroubleshooting Problem SolutionAppendix SNC-C6225N/P CCDSNC-C7225N/P DetailsNtsc PAL LevelDimension Unit mmPipe Thread Unit mm Wall Mount Bracket Rev

SNC-C7225, SNC-C6225 specifications

The Samsung SNC-C6225 and SNC-C7225 are advanced network cameras designed for professional surveillance applications, showcasing cutting-edge technology and features to meet diverse security needs. Both models are highly regarded for their superior image quality, robust design, and innovative functionalities that provide reliable performance in various environments.

The SNC-C6225 is equipped with a 1/3-inch CCD image sensor, offering a resolution of up to 600 TV lines. This enables it to capture high-quality video footage with exceptional clarity and detail, making it an ideal choice for monitoring areas that require close scrutiny. It supports day/night functionality, allowing the camera to automatically switch between color and monochrome modes based on ambient light. This feature is crucial for 24/7 surveillance, ensuring optimal visibility regardless of lighting conditions.

In contrast, the SNC-C7225 features an advanced 1/3-inch progressive scan CMOS sensor, which provides superior low-light performance and can capture video at a resolution of up to 720p HD. This camera takes advantage of wide dynamic range (WDR) technology to deliver clear images even in challenging lighting scenarios, such as scenes with strong backlighting or glare. The SNC-C7225's enhanced frame rate allows for smooth playback, making it easier to track fast-moving subjects or activities.

Both models offer versatile networking capabilities, supporting IP video transmission over Ethernet, which simplifies installation and integration into existing security systems. They feature Power over Ethernet (PoE) support, enabling single-cable installation for power and data transmission. This not only reduces the complexity of wiring but also enhances placement flexibility.

The cameras come equipped with a variety of intelligent video analytics features, including motion detection, tampering detection, and face detection. These capabilities enhance operational efficiency by allowing for proactive monitoring and management of security events. With remote access and control, users can easily manage the cameras through web browsers or dedicated applications, facilitating quick responses to incidents.

Durability is a key characteristic of both the SNC-C6225 and SNC-C7225. With weather-resistant housings and a wide operating temperature range, these cameras are built to withstand harsh environmental conditions, making them suitable for both indoor and outdoor installations.

In summary, Samsung's SNC-C6225 and SNC-C7225 network cameras offer state-of-the-art surveillance technology characterized by high-resolution imaging, robust design, and intelligent features. Their advanced capabilities make them excellent choices for businesses and organizations looking to enhance security and monitor their premises effectively.