Samsung SNC-C6225 SET Home Position, SET North Direction, Language, FAN RUN Temp, Heater RUN Temp

Page 37

how to use osd menu

SET HOME POSITION

SET NORTH DIRECTION

MOVE TO TARGET POSITION

MOVE TO TARGET POSITION

[ENTER : SELECT]

[ENTER : SELECT]

0/0/x1/N

0/0/x1/N

SET HOME POSITION

HOME position means the origin of PAN angle calculation. The value of PAN angle displayed on the screen is based on this HOME position.

By using Joystick, move the camera to the desired position and press ENTER.

It is noted that Home is not effective to Tilt angle.

If you change the location of Home position, all horizontal locations of functions such as preset, pattern, scan, auto pan, and privacy zone mask will be shifted based on changed Home position.

If there are no setup for those functions like Preset, Pattern, Auto Pan and Scan, Camera will automatically move to Home position after rebooting.

If Power Up Action is set to be ON, camera will continue the function which is executed lastly after rebooting.

* Set Home Position?

When you replace the camera block or the orientation of camera is changed due to maintenance operations, it is very diffi cult to maintain same pan orientation. Therefore, all function data depending on pan orientation such as preset, pattern, scan, auto pan, and privacy zone mask are not useful any more accordingly. However, even in this case, you can reuse the data if you redefi ne Set Home Position on the previous Home position. It is recommendable to memorize the target scene of current Home position.

SET NORTH DIRECTION

You can set up North direction.

By using Joystick, move the camera to the desired NORTH position and press ENTER key.

The direction will be displayed in the screen [PAN AXIS / TILT AXIS / ZOOM / DD]

DD is direction and will be displayed from: [N/NE/E/SE/S/SW/W/NW]

LANGUAGE

You can select a preferred Language of OSD display from 7 choices.

[ENGLISH/ ESPAÑOL/ FRANÇAIS/ DEUTSCH/ ITALIANO/ РУССКИЙ/ PORTUGUÊS]

After selecting a language, press the ENTER key.

FAN/HEATER SETUP

 

FAN RUN TEMP

40°C

HEATER RUN TEMP

5°C

BACK

EXIT

FAN RUN TEMP

Above this temperature, the blower fan will start automatically.

[Range: 30°C ~ 80°C (86°F ~ 176°F)]

HEATER RUN TEMP

Bellow this temperature, the Heater will be tuned on automatically.

[Range: -10°C ~ 20°C (14°F ~ 68°F)]

FAN and HEATER are only available in C7225 model.

English – 37

Image 37
Contents 10x Network Mini Smart Dome Camera Safety information FCC Statement Important safety instructions Contents Contents Introduction FeaturesCompatible IP Routers Recommended PC SpecificationsLinksys Netgear Accessories Product & AccessoriesSNC-C6225 Product Main BodySNC-C7225 Parts Name & Functions Fixes main unit brackets like surface, wall, and ceiling DIP Switch Setup InstallationCamera ID Setup Communication Protocol SetupRS-485 Termination Resistor Installation Using Surface Mount on the CeilingInstallation Using Ceiling Mount Bracket Installation Using Wall Mount Bracket Cabling Power ConnectionSNC-C6225/SNC-C7225 RS-485 CommunicationVideo Connection Alarm Input ConnectionAudio Input/Ouput Connection InternalInserting an Micro Sdhc Memory Card INSERTING/REMOVING AN Micro Sdhc Memory CardRemoving an Micro Sdhc Memory Card Memory Card Information not Included What is a memory card?Selecting a memory card that’s suitable for you Operation Auto PAN PresetPattern Schedule ScanOther Functions FlipOSD Display of Main Screen SET Preset ×××General Rules of KEY Operation for Menu Pattern ×Structure of the Setup Menu How to use osd menuSystem Information Display Setup Motion Setup Function SetupSystem Setup Camera SetupSystem Initialize Privacy Zone Mask Setup Display SetupMain Menu System InformationPrivacy Zone Area Setup Motion SetupPrivacy Zone Size Adjustment Parking Action Setup Function SetupEdit Preset Scene Preset SetupEdit Preset Label Pattern Setup Auto PAN SetupEdit Pattern Scan SetupEdit Scan Set up items such as Action NO., Dwell and OPT Action no NONE/PRESET/AUTO PAN/PATTERNOPT Edit Schedule Schedule SetupWhite Balance Setup Camera SetupAuto Exposure Setup System Setup SET North Direction SET Home PositionLanguage FAN RUN TempInitial Configuration Table System InitializeNetwork connection and setup processes are given as follows Network connection & setupIP address Subnet Mask Default Gateway SNC-C6225 XDSL or Cable Modem IP RouterSetting the IP address IP Router Connecting to the camera from an IP router external PC Connecting to the camera from a remote PC Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingSearching for the Camera IP Installer screen layoutManual Network Setting Setting static ipDevice Port a port used to control video transmission. If more than one camera are connected to an IP RouterEnter your password Automatic Network SettingDynamic IP Setting Setting dynamic ipPort Forwarding Port Mapping Setting Examples of using Dynamic IPConnecting to the Camera Using the cameraConnecting to the camera Http//e30002c.websamsung.net10000 Login window appearsConnecting to the camera using the IP Installer program Installing ActivexFor Windows XP Service Pack Checking the Ddns addressLogging to the camera Main Screen Web viewerPower PTZ Using the CameraIs started To Record a Video At desired scene, click the Record buttonTo stop a recording, click the Record button once again Alarm Input Using the SD Search Viewer ScreenYou can select the desired time to search the alarm events ScheduleSetting the Camera Setup toolSetup Screen Layout SetupVideo & Audio Configuration IP Type IPv6 EnableMAC Address IP AddressLanguage UserDigital Image Stabilizer DATE/TIME Software UpdateLOG Transfer Setup ResetHttps Record Setup Alarm Input Setup Alarm Image SetupFunction MotionConfiguration Motion SensitivitySchedule Transfer Function Streaming SetupTransfer Interval Streaming ProtocolDdns Snmp Snmp User SetupProblem Solution TroubleshootingAppendix CCD SNC-C6225N/PDetails SNC-C7225N/PLevel Ntsc PALUnit mm DimensionPipe Thread Unit mm Wall Mount Bracket Rev

SNC-C7225, SNC-C6225 specifications

The Samsung SNC-C6225 and SNC-C7225 are advanced network cameras designed for professional surveillance applications, showcasing cutting-edge technology and features to meet diverse security needs. Both models are highly regarded for their superior image quality, robust design, and innovative functionalities that provide reliable performance in various environments.

The SNC-C6225 is equipped with a 1/3-inch CCD image sensor, offering a resolution of up to 600 TV lines. This enables it to capture high-quality video footage with exceptional clarity and detail, making it an ideal choice for monitoring areas that require close scrutiny. It supports day/night functionality, allowing the camera to automatically switch between color and monochrome modes based on ambient light. This feature is crucial for 24/7 surveillance, ensuring optimal visibility regardless of lighting conditions.

In contrast, the SNC-C7225 features an advanced 1/3-inch progressive scan CMOS sensor, which provides superior low-light performance and can capture video at a resolution of up to 720p HD. This camera takes advantage of wide dynamic range (WDR) technology to deliver clear images even in challenging lighting scenarios, such as scenes with strong backlighting or glare. The SNC-C7225's enhanced frame rate allows for smooth playback, making it easier to track fast-moving subjects or activities.

Both models offer versatile networking capabilities, supporting IP video transmission over Ethernet, which simplifies installation and integration into existing security systems. They feature Power over Ethernet (PoE) support, enabling single-cable installation for power and data transmission. This not only reduces the complexity of wiring but also enhances placement flexibility.

The cameras come equipped with a variety of intelligent video analytics features, including motion detection, tampering detection, and face detection. These capabilities enhance operational efficiency by allowing for proactive monitoring and management of security events. With remote access and control, users can easily manage the cameras through web browsers or dedicated applications, facilitating quick responses to incidents.

Durability is a key characteristic of both the SNC-C6225 and SNC-C7225. With weather-resistant housings and a wide operating temperature range, these cameras are built to withstand harsh environmental conditions, making them suitable for both indoor and outdoor installations.

In summary, Samsung's SNC-C6225 and SNC-C7225 network cameras offer state-of-the-art surveillance technology characterized by high-resolution imaging, robust design, and intelligent features. Their advanced capabilities make them excellent choices for businesses and organizations looking to enhance security and monitor their premises effectively.