Samsung SNC-C6225, SNC-C7225 user manual Camera Setup, White Balance Setup, Auto Exposure Setup

Page 35

how to use osd menu

CAMERA SETUP

Setup the general functions of zoom camera module

ZOOM CAMERA SETUP

FOCUS MODE	ONEAF
DIGITAL ZOOM	ON
IMAGE FLIP	OFF

<WHITE BALANCE SETUP> <AUTO EXPOSURE SETUP>

BACK

EXIT

•FOCUS MODE [AUTO/MANUAL/ONEAF] Sets camera focus mode.

ONEAF

This mode exchanges focus mode automatically between Manual Focus mode and Auto Focus mode. Manual Focus mode activates in preset operation and Auto Focus mode activates when jog operation starts.

With Manual mode at presets, Focus data is memorized in each preset in advance and camera calls focus data in correspondence with presets as soon as camera arrives at a preset.

•DIGITAL ZOOM [ON/OFF]

Sets digital zoom function to ON/OFF. If this is set to OFF, optical zoom function runs but zoom function stops at the end of optical zoom magniﬁ cation.

• IMAGE FLIP

[ON/OFF]

To display Upside down image.

❖ White Balance Setup

WB SETUP
WB MODE	AUTO
- RED ADJUST	---
- BLUE ADJUST	---

BACK

EXIT

• WB MODE

[AUTO/MANUAL]

In Manual mode, Red and Blue level can be set up manually

• RED ADJUST [10~60]

• BLUE ADJUST [10~60]

❖Auto Exposure Setup

AE SETUP
BACKLIGHT	OFF
DAY/NIGHT	AUTO1
BRIGHTNESS	25
IRIS	AUTO
SHUTTER	ESC
AGC	NORMAL
DNR	MIDDLE
SENS-UP	OFF

BACK

EXIT

• BACKLIGHT	[OFF/LOW/MIDDLE/HIGH]
Sets Backlight Compensation
• DAY/NIGHT	[AUTO1/AUTO2/DAY/NIGHT]

The illumination condition for switching between Day and Night modes of AUTO1 is brighter than that of AUTO2.

• BRIGHTNESS [0~100]

Adjusts brightness of images. Iris, Shutter Speed and Gain are adjusted automatically in correspondence with this value.

• IRIS

[AUTO/MANUAL(0~100)]

If Iris is set to Auto, Iris should have highest priority in adjusting AE and Shutter Speed should be ﬁ xed.

If Iris is set to Manual, Iris should be ﬁ xed and Iris has lower priority in adjusting AE, in comparison with others.

English – 35

Image 35

Contents

10x Network Mini Smart Dome Camera Safety information FCC Statement Important safety instructions Contents Contents Introduction FeaturesLinksys Netgear Recommended PC SpecificationsCompatible IP Routers Product Main Body Product & AccessoriesAccessories SNC-C6225SNC-C7225 Parts Name & Functions Fixes main unit brackets like surface, wall, and ceiling Communication Protocol Setup InstallationDIP Switch Setup Camera ID SetupRS-485 Termination Resistor Installation Using Surface Mount on the CeilingInstallation Using Ceiling Mount Bracket Installation Using Wall Mount Bracket RS-485 Communication Power ConnectionCabling SNC-C6225/SNC-C7225Internal Alarm Input ConnectionVideo Connection Audio Input/Ouput ConnectionRemoving an Micro Sdhc Memory Card INSERTING/REMOVING AN Micro Sdhc Memory CardInserting an Micro Sdhc Memory Card Selecting a memory card that’s suitable for you What is a memory card?Memory Card Information not Included Operation Pattern PresetAuto PAN Flip ScanSchedule Other FunctionsPattern × SET Preset ×××OSD Display of Main Screen General Rules of KEY Operation for MenuFunction Setup How to use osd menuStructure of the Setup Menu System Information Display Setup Motion SetupSystem Initialize Camera SetupSystem Setup System Information Display SetupPrivacy Zone Mask Setup Main MenuPrivacy Zone Size Adjustment Motion SetupPrivacy Zone Area Setup Parking Action Setup Function SetupEdit Preset Label Preset SetupEdit Preset Scene Pattern Setup Auto PAN SetupEdit Scan Scan SetupEdit Pattern OPT Action no NONE/PRESET/AUTO PAN/PATTERNSet up items such as Action NO., Dwell and OPT Edit Schedule Schedule SetupAuto Exposure Setup Camera SetupWhite Balance Setup System Setup FAN RUN Temp SET Home PositionSET North Direction LanguageInitial Conﬁguration Table System InitializeSNC-C6225 XDSL or Cable Modem IP Router Network connection & setupNetwork connection and setup processes are given as follows IP address Subnet Mask Default GatewaySetting the IP address IP Router Connecting to the camera from an IP router external PC Connecting to the camera from a remote PC Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingSearching for the Camera IP Installer screen layoutManual Network Setting Setting static ipDevice Port a port used to control video transmission. If more than one camera are connected to an IP RouterEnter your password Automatic Network SettingExamples of using Dynamic IP Setting dynamic ipDynamic IP Setting Port Forwarding Port Mapping SettingHttp//e30002c.websamsung.net10000 Login window appears Using the cameraConnecting to the Camera Connecting to the cameraChecking the Ddns address Installing ActivexConnecting to the camera using the IP Installer program For Windows XP Service PackLogging to the camera Main Screen Web viewerPower PTZ Using the CameraTo stop a recording, click the Record button once again To Record a Video At desired scene, click the Record buttonIs started Schedule Using the SD Search Viewer ScreenAlarm Input You can select the desired time to search the alarm eventsSetup Setup toolSetting the Camera Setup Screen LayoutVideo & Audio Configuration IP Address IPv6 EnableIP Type MAC AddressDigital Image Stabilizer UserLanguage LOG Software UpdateDATE/TIME Https ResetTransfer Setup Record Setup Alarm Input Setup Alarm Image SetupMotion Sensitivity MotionFunction ConﬁgurationStreaming Protocol Streaming SetupSchedule Transfer Function Transfer IntervalDdns Snmp Snmp User SetupProblem Solution TroubleshootingAppendix CCD SNC-C6225N/PDetails SNC-C7225N/PLevel Ntsc PALPipe Thread DimensionUnit mm Unit mm Wall Mount Bracket Rev