D-Link DCS5020L user manual Live Video, Compression Format

Page 20

Section 3 - Configuration

Live Video

The Live Video screen shows you the live video feed from your camera. For information on how to configure your Live Video streams, refer to “Video” on page 29.

Video Click the H.264 or MJPEG radio button to choose which stream to view.

Compression

Format:

Pan/Tilt Wheel: Click on the directional arrows on the pan/tilt wheel to manually control the pan and tilt functions of the camera. At any time, you can click the home button in the center of the wheel to return the camera to its home position.

Go To: Select one of the preset locations from the drop-down menu to move the camera to that position. Preset positions can be set by going to the Camera Control section of the Setup menu.

Pan Step: Select the increment of movement for each press of a pan (up/down)arrow on the pan/tilt wheel.

Tilt Step: Select the increment of movement for each press of a tilt (left/right) arrow on the pan/tilt wheel.

Language: You can select the desired language for the web interface from this drop-down menu.

Zoom: Click on these buttons to adjust the level of digital zoom applied to the image

Audio: Click on these buttons to turn audio playback on and off.

Night Mode: If you have set the night mode to manual, the night mode feature can be toggled using these buttons

Note: If the live image is blurry or out of focus, you can manually adjust the focus by rotating the manual focus bezel surrounding the camera lens.

D-Link DCS-5020L User Manual

20

Image 20
Contents Wireless N Day & Night Pan/Tilt Cloud Camera Manual Overview Manual RevisionTrademarks Revision Date DescriptionTable of Contents Table of Contents Troubleshooting Technical Specifications Warranty RegistrationSystem Requirements Package ContentsProduct Overview Introduction Features Hardware Overview Front ViewRear View Installation Attach the External Power Adapter Zero Configuration SetupConnect the Ethernet Cable and Power Cable Check Your mydlink Account Register Device to mydlinkInstallation Camera Setup Wizard Manual Hardware Installation Plug in the External Power AdapterConfigure Your Camera Optional Use WPS to Connect WirelesslyWireless Installation Considerations WPS Push Button Setup To create a WPS connection StepMydlink Configuration Using the Web Configuration InterfaceLive Video Compression FormatSetup WizardInternet Connection Setup Wizard Configuration Network Setup Wireless Setup WirelessExtender Setup Extender ModeDynamic DNS Ddns Image Setup ControlVideo Settings AudioMotion Detection Sound Detection Mail AddressConfiguration FTP FTP server the Image Frequency specifiedSpecified above to make sure that your settings are correct Uploading Various waysChoosing Always will upload video continuously, based on FTP server Video Limit specified belowTime and Date To apply daylight saving correctionsDay/Night Mode Live VideoCamera Control Maintenance AdminSystem File buttonFirmware Upgrade Status Device InfoActive User Troubleshooting What is Remote Access? How do I enable it?Troubleshooting Why don’t the LEDs light up? Why is the camera’s network connection unreliable?Why are no images available through the Web browser? Technical Specifications Appendix a Technical SpecificationsSensor Appendix B Contacting Technical Support Contacting Technical SupportPhone Support Appendix C Warranty WarrantyLimited Warranty Submitting a Claim USA Limited Software WarrantyNon-Applicability of Warranty Submitting a Claim Canada What Is Not Covered Disclaimer of Other WarrantiesLimitation of Liability Governing LawTrademarks Copyright StatementCE Mark Warning FCC StatementFCC Caution FCC Radiation Exposure StatementIndustry Canada Statement Important NoteRegistration Appendix D Registration