D-Link DCS5020L user manual Configuration

Page 34

Section 3 - Configuration

Enable the e-mailingEnablingthiswillallowsnapshotstobee-mailedtoyouindifferentways: of images to an e-mail

account: • Choosing Always will e-mail snapshots continuously based on the E-mail Interval specified.

Choosing Schedule will allow you to schedule when to start and stop the e-mailing of snapshots.

Select Motion/Sound Detection if you would like the camera to e-mail images only when motion or sound is detected. You can choose whether to e-mail a snapshot immediately, or e-mail 6 snapshots together, with 3 frames before and after motion/sound was detected.You can also set the Frame interval time to specify how far apart the snapshots should be.

E-mail Interval: This sets the limit for how frequently e-mail notifications will be sent. This can be set from 1 to 65535 seconds.

Enable the e-mailing of Enabling this will allow video clips to be e-mailed to you in different video clips to an e-mailways. This is the same as e-mailing images, as specified above, but will

account: take video clips according to the Video Limit settings you specify.

Test E-mail Account: This will send a test e-mail according to the e-mail settings you have specified above.

D-Link DCS-5020L User Manual

34

Image 34
Contents Wireless N Day & Night Pan/Tilt Cloud Camera Trademarks Manual OverviewManual Revision Revision Date DescriptionTable of Contents Table of Contents Troubleshooting Technical Specifications Warranty RegistrationProduct Overview Package ContentsSystem Requirements Introduction Features Hardware Overview Front ViewRear View Installation Connect the Ethernet Cable and Power Cable Zero Configuration SetupAttach the External Power Adapter Check Your mydlink Account Register Device to mydlinkInstallation Camera Setup Wizard Configure Your Camera Manual Hardware InstallationPlug in the External Power Adapter Optional Use WPS to Connect WirelesslyWireless Installation Considerations WPS Push Button Setup To create a WPS connection StepMydlink Configuration Using the Web Configuration InterfaceLive Video Compression FormatSetup WizardInternet Connection Setup Wizard Configuration Network Setup Wireless Setup WirelessExtender Setup Extender ModeDynamic DNS Ddns Image Setup ControlVideo Settings Audio Motion Detection Sound Detection Mail AddressConfiguration FTP FTP server the Image Frequency specifiedChoosing Always will upload video continuously, based on Specified above to make sure that your settings are correctUploading Various ways FTP server Video Limit specified belowTime and Date To apply daylight saving correctionsDay/Night Mode Live VideoCamera Control Maintenance AdminSystem File buttonFirmware Upgrade Status Device InfoActive User Troubleshooting What is Remote Access? How do I enable it?Troubleshooting Why don’t the LEDs light up? Why is the camera’s network connection unreliable?Why are no images available through the Web browser? Technical Specifications Appendix a Technical SpecificationsSensor Phone Support Contacting Technical SupportAppendix B Contacting Technical Support Limited Warranty WarrantyAppendix C Warranty Non-Applicability of Warranty Limited Software WarrantySubmitting a Claim USA Submitting a Claim Canada What Is Not Covered Disclaimer of Other WarrantiesTrademarks Limitation of LiabilityGoverning Law Copyright StatementFCC Caution CE Mark WarningFCC Statement FCC Radiation Exposure StatementIndustry Canada Statement Important NoteRegistration Appendix D Registration