D-Link DCS5020L Uploading Various ways, Choosing Always will upload video continuously, based on

Page 36

Section 3 - Configuration

File: Select how you want uploading of snapshots to be handled:

Overwrite will replace the old snapshot with the new one. This means you will only have one snapshot that is updated every time a new one is taken.

Date/Time Suffix will add the date and time to the end of the snapshot file name. You can also choose to make subfolders based on a period of time you specify to help you organize your snapshots.

Sequence Number Suffix will add a number to the end of the snapshot file name up to the number you specify, after which the oldest files will be overwritten.

Enable the

Enabling this will allow video clips to be uploaded to your FTP server in

uploading of

various ways.

video clip to an

• Choosing Always will upload video continuously, based on the

FTP server:

Video Limit specified below.

Choosing Schedule will allow you to schedule when to start and stop the uploading of video.

Select Motion/Sound Detection if you would like the camera to upload video only when motion or sound is detected.

File Name

Set the desired base file name for your videos.

Prefix:

 

Video Limit:

Specify the maximum file size and duration of the videos to be uploaded.

Test FTP Server:

Clicking on the Test button will send a test JPEG snapshot to the FTP server

 

specified above to make sure that your settings are correct.

D-Link DCS-5020L User Manual

36

Image 36
Contents Wireless N Day & Night Pan/Tilt Cloud Camera Manual Overview Manual RevisionTrademarks Revision Date DescriptionTable of Contents Table of Contents Troubleshooting Technical Specifications Warranty RegistrationPackage Contents Product OverviewSystem Requirements Introduction Features Hardware Overview Front ViewRear View Installation Zero Configuration Setup Connect the Ethernet Cable and Power CableAttach the External Power Adapter Check Your mydlink Account Register Device to mydlinkInstallation Camera Setup Wizard Manual Hardware Installation Plug in the External Power AdapterConfigure Your Camera Optional Use WPS to Connect WirelesslyWireless Installation Considerations WPS Push Button Setup To create a WPS connection StepMydlink Configuration Using the Web Configuration InterfaceLive Video Compression FormatSetup WizardInternet Connection Setup Wizard Configuration Network Setup Wireless Setup WirelessExtender Setup Extender ModeDynamic DNS Ddns Image Setup ControlVideo Settings AudioMotion Detection Sound Detection Mail AddressConfiguration FTP FTP server the Image Frequency specifiedSpecified above to make sure that your settings are correct Uploading Various waysChoosing Always will upload video continuously, based on FTP server Video Limit specified belowTime and Date To apply daylight saving correctionsDay/Night Mode Live VideoCamera Control Maintenance AdminSystem File buttonFirmware Upgrade Status Device InfoActive User Troubleshooting What is Remote Access? How do I enable it?Troubleshooting Why don’t the LEDs light up? Why is the camera’s network connection unreliable?Why are no images available through the Web browser? Technical Specifications Appendix a Technical SpecificationsSensor Contacting Technical Support Phone SupportAppendix B Contacting Technical Support Warranty Limited WarrantyAppendix C Warranty Limited Software Warranty Non-Applicability of WarrantySubmitting a Claim USA Submitting a Claim Canada What Is Not Covered Disclaimer of Other WarrantiesLimitation of Liability Governing LawTrademarks Copyright StatementCE Mark Warning FCC StatementFCC Caution FCC Radiation Exposure StatementIndustry Canada Statement Important NoteRegistration Appendix D Registration