Cisco Systems 2500 Series, CIVS-IPC-2500 manual Option Description, Device Settings

Page 28

Chapter 3 Configuring and Managing the IP Camera

Setup Windows

Table 3-2

Basic Setup Window Options

 

 

 

Option

 

Description

 

 

Device Settings

 

 

 

 

Device ID

 

Display only. Unique identifier of the IP camera. The device ID is configured

 

 

for the IP camera at the factory.

 

 

 

Camera Name

 

Enter a name for the IP camera. This name appears in the video log if an

 

 

event occurs. (For related information, see the “Video Log Window” section

 

 

on page 3-46.)

 

 

The camera name can include any combination of up to 15 letters and

 

 

numbers. Cisco recommends that you give each IP camera a unique name so

 

 

that you can identify it easily.

 

 

 

Description

 

Enter a description of the IP camera. For example, enter the IP camera

 

 

location, such as “North Entrance.”

 

 

The description can include any combination of up to 32 letters, numbers,

 

 

and spaces.

 

 

Enable LED Operations

Check this check box if you want the Ready LED or Activity LED on the

 

 

front of the IP camera to light when the IP camera receives power or

 

 

performs an activity.

 

 

If you do not check this check box, these LEDs do not light.

 

 

Current Date/Time

Display only. Current date and time of the internal clock of the IP camera.

 

 

To change the date or time, click Change to display the Set Date/Time

 

 

window, then take the appropriate action:

 

 

To synchronize the IP camera date and time with the date and time of the

 

 

PC that you are using, click Sync with PC.

 

 

To set the IP camera date and time to any values, enter the values in the

 

 

New Date and New Time fields, then click Set New Time.

 

 

To exit the Date/Time window, click Close.

 

 

 

Time Zone

 

From the drop-down list, choose the time zone in which the IP camera is

 

 

located.

 

 

The time that appears when you view video from this IP camera reflects this

 

 

time zone.

 

 

Adjust for Daylight

Check this check box if you want the time of the IP camera to adjust

Saving Time

 

automatically for daylight saving time.

 

 

Check here if you want

Check this check box if you want the IP camera to obtain its time from a

to update the time

network time protocol (NTP) server.

automatically from the

If you check this check box, the camera contacts the designated NTP server

NTP server from the

every 64 seconds and synchronizes its internal clock with the time of that

Internet

 

 

server.

 

 

 

 

NTP Server Address

If you configured the IP camera to obtain its time from an NTP server, enter

 

 

the IP address of the NTP server.

 

 

 

NTP Port

 

If you configured the IP camera to obtain its time from an NTP server, enter

 

 

the NTP server port number.

 

 

The default value is 123.

 

 

 

Cisco Video Surveillance 2500 Series IP Camera User Guide

3-6

OL-19273-02

 

 

Image 28
Contents Cisco Video Surveillance 2500 Series IP Camera User Guide Americas HeadquartersCisco Video Surveillance 2500 Series IP Camera User Guide N T E N T S Using the IP Camera with Cisco VSM Overview OrganizationCisco Video Surveillance 2500 Series IP Camera User Guide Features Features, IP Camera Physical Details,IP Camera Physical Details Basic Setup Window section on Back Focus on the IP Camera section onDescribed in the Resetting the IP Camera section on Rear of IP CameraSide of IP Camera DC Auto Iris Lens Connector Pinouts Package ContentsInstalling the Cisco Video Surveillance IP Camera Getting StartedAction Explanation Action Explanation Initial Setup of the IP Camera, page 2-5, then Configuring and Managing the IP Camera. At aPerforming the Initial Setup of the IP Camera ProcedureAccessing the IP Camera Windows Protocol//ipaddressHttps//192.168.0.100 Https//203.70.212.521024Http//203.70.212.52 Http//203.70.212.521024Adjusting Back Focus on the IP Camera Powering the IP Camera On or OffResetting the IP Camera Reset Type Procedure RemarksInitial Setup of the IP Camera Section onCleaning the IP Camera Configuring and Managing the IP Camera Configuration OverviewConfiguration Item Explanation Guidelines for Use Reference EapolSee the Alarm I/O Ports Preset PositionsSee the Video Window section See the Audio Window sectionSee the Syslog & Log Window Navigating the Configuration WindowsSee the Video Log Window Basic Setup Window Setup WindowsSnmp Device Settings Option DescriptionWireless Setup Window Network SettingsWireless Settings Edit Security SettingsHide Security Settings WEP Security Mode OptionsWPA/WPA2 Personal Mode Options AESEdit Region Settings WPA/WPA2 Enterprise Mode OptionsHide Region Settings Option Advanced Setup WindowBonjour HTTP/HTTPS QoS DscpIP Filter Window Eapol WindowUsers Window, Maintenance Window, Firmware Window, Administration WindowsEAP-FAST Options Users Window AdministratorUser List Maintenance Window Passwords after saving the configuration file, be aware that Audio/Video Windows Firmware WindowVideo Window Video Window, Audio Window,MPEG-4 Settings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forPAL Mjpeg Settings Video Adjustment PAL/50 HzOptions Day/Night VisionAudio Window Home Window Controls section on Duplex Talk and ListenChoose Simplex Talk Only , Half Duplex Talk or Listen , or Full Duplex Talk and ListenSecurity Windows Product Process WindowInitialization Window Complexity WindowUsers Window section on HttpApplications Windows Mail & FTP WindowDescribed in the Basic Setup Window section on Mail SetupPrimary Smtp Server Secondary Smtp ServerMotion Detection Window Mail BodyPrimary FTP Secondary FTPEvent Window Event Schedule New ScheduleClear button Trigger EventMessages, see the Mail & FTP Window section on AttachmentSnmp Window Alarm I/O Ports Window Alarm Input SettingsAlarm Output Settings Manual Control SettingsPreset Position Port SettingsPTZ RS-485 Window Preset Positions Window Patrol SequenceZoom In button Zoom Out buttonFocus Far button Status WindowsFocus Near button Information, see the Basic Setup Window section on More information, see the Basic Setup Window section onSystem Window Audio/Video WindowAudio Setting WirelessNetwork Window NetworkSyslog & Log Window Local LogSys Log Server Log ListMessage Explanation System log messagesAddress Address1 Port1 Address2 Port2 , User FTP log messages Video Log WindowSmtp log messages Delete button Delete All buttonOL-19273-02 Viewing Video through the Home Window Overview Home Window OverviewHome Window Home Window Controls Control DescriptionIP camera controls For related information, see the Video Window section onInformation, see the PTZ RS-485 Window section on Video display and audio controlsSave Enabling audio, see the Audio Window section onAccessing the Primary MPEG-4 Stream by using VLC Player Viewing Video through Third-Party Devices or SoftwareRtsp//ipaddress/img/media.sav Http//ipaddress/img/video.asfAccessing the Secondary MPEG-4 Stream by using VLC Player Accessing the Mjpeg Stream by using VLC PlayerRtsp//ipaddress/img/media2.sav Http//ipaddress/img/video2.asfCisco Video Surveillance 2500 Series IP Camera User Guide Troubleshooting Troubleshooting Using the IP Camera with Cisco VSM For instructions, see the Video Window section onOL-19273-02 D E IN-1IN-2 EAP-FAST IN-3Https IN-4Smtp LEDIN-5 See PTZ IN-6PTZ IN-7IN-8 WEP IN-9IN-10
Related manuals
Manual 82 pages 45.48 Kb Manual 14 pages 34.66 Kb Manual 12 pages 10.86 Kb

CIVS-IPC-2500, 2500 Series specifications

The Cisco Systems 2500 Series routers are a series of versatile, feature-rich networking devices designed to address the needs of various enterprises and small to medium-sized businesses. Released in the early 1990s, the 2500 Series quickly became a backbone solution for organizations seeking reliable and efficient networking capabilities.

One of the defining characteristics of the Cisco 2500 Series is its modular architecture, which allows businesses to customize their routers based on specific networking needs. This modularity accommodates various interface cards, enabling the integration of different protocols and connection types, including serial, Ethernet, and WAN interfaces. As a result, organizations can tailor their routers to support diverse applications while ensuring optimal performance.

The Cisco 2500 Series supports several advanced routing protocols, including RIP, OSPF, EIGRP, and BGP. This support provides flexibility for network design and ensures that users can implement scalable solutions as their business grows. Moreover, the routers come equipped with robust security features, including access control lists (ACLs) and support for VPNs, making them suitable for organizations that require a secure network environment.

A notable feature of the Cisco 2500 Series is its support for Quality of Service (QoS). This functionality allows organizations to prioritize certain types of traffic, ensuring that critical applications, such as VoIP or video conferencing, receive the necessary bandwidth and minimal latency. This is particularly beneficial for businesses that rely on real-time communications and need to maintain high levels of service quality.

Additionally, the implementation of Cisco’s internetworking technologies, such as IP and frame relay, enhances the overall performance and versatility of the 2500 Series routers. These technologies enable efficient data transmission and improve network reliability, which is essential for organizations with complex networking requirements.

In summary, the Cisco Systems 2500 Series routers are known for their modular design, support for multiple routing protocols, robust security features, and advanced QoS capabilities. Their ability to adapt to different networking environments makes them an ideal choice for businesses looking to enhance their connectivity and streamline their operations. Even decades after their introduction, the 2500 Series remains a relevant player in the networking market, demonstrating Cisco's commitment to providing effective solutions for diverse industries.