Cisco Systems CIVS-IPC-2500 Audio/Video Windows, Firmware Window, Video Window, Audio Window

Page 41

Chapter 3 Configuring and Managing the IP Camera

Audio/Video Windows

Firmware Window

The Firmware window lets you view information about the firmware that is installed on the IP camera and upgrade the firmware.

Before you upgrade firmware, download the firmware file to a PC that is accessible on your network and unzip the file if it is zipped. To download firmware, go to this web page:

http://www.cisco.com/en/US/products/ps7307/index.html

After you upgrade firmware, the IP camera restarts automatically. It retains all configuration information.

To display the Firmware window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-6, click Administration, then click Firmware.

Table 3-9describes the options in the Firmware window.

Table 3-9 Firmware Window Options

Option

Description

 

 

Firmware Version

Display only. Firmware version that is loaded on the IP camera.

 

 

Upgrade

Click the Upgrade button to upgrade the firmware on the IP camera.

 

When you click this button, the Upgrade Firmware window appears. In this

 

window, enter the path and folder where the firmware upgrade file for the IP

 

camera is stored. The upgrade file may be stored on another PC. You can

 

click Browse to find this location. After you enter this information, click

 

Upgrade and follow the on-screen prompts to load the firmware upgrade on

 

the IP camera.

 

Note Do not power down the IP camera during the upgrade procedure.

 

 

Recovery Firmware

Display only. Firmware version of the recovery image. If an upgrade fails,

Version

the IP camera boots from the recovery image.

 

 

Audio/Video Windows

The Audio/Video windows provide options for configuring audio and video from the IP camera.

The following sections describe the Setup windows in detail:

•Video Window, page 3-19.

•Audio Window, page 3-24

Video Window

The Video window provides options for configuring the video from the IP camera. You can configure settings for the primary and an optional secondary video stream.

Configuring a secondary stream is useful for providing third-party devices or software with a video stream that is at a lower resolution than the primary. Some devices and software require this lower resolution. For related information, see the “Viewing Video through Third-Party Devices or Software” section on page 4-6.

 

 

Cisco Video Surveillance 2500 Series IP Camera User Guide

 

 

 

 

 

 

OL-19273-02

 

 

3-19

 

 

 

 

 

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Americas Headquarters Cisco Video Surveillance 2500 Series IP Camera User GuideCisco Video Surveillance 2500 Series IP Camera User Guide N T E N T S Using the IP Camera with Cisco VSM Organization OverviewCisco Video Surveillance 2500 Series IP Camera User Guide Features, IP Camera Physical Details, FeaturesIP Camera Physical Details Back Focus on the IP Camera section on Basic Setup Window section onRear of IP Camera Described in the Resetting the IP Camera section onSide of IP Camera Package Contents DC Auto Iris Lens Connector PinoutsGetting Started Installing the Cisco Video Surveillance IP CameraAction Explanation Action Explanation Configuring and Managing the IP Camera. At a Initial Setup of the IP Camera, page 2-5, thenProcedure Performing the Initial Setup of the IP CameraProtocol//ipaddress Accessing the IP Camera WindowsHttps//203.70.212.521024 Https//192.168.0.100Http//203.70.212.52 Http//203.70.212.521024Powering the IP Camera On or Off Adjusting Back Focus on the IP CameraReset Type Procedure Remarks Resetting the IP CameraInitial Setup of the IP Camera Section onCleaning the IP Camera Configuration Overview Configuring and Managing the IP CameraEapol Configuration Item Explanation Guidelines for Use ReferencePreset Positions See the Alarm I/O PortsSee the Video Window section See the Audio Window sectionSee the Video Log Window Navigating the Configuration WindowsSee the Syslog & Log Window Snmp Setup WindowsBasic Setup Window Option Description Device SettingsNetwork Settings Wireless Setup WindowEdit Security Settings Wireless SettingsHide Security Settings WEP Security Mode OptionsAES WPA/WPA2 Personal Mode OptionsHide Region Settings WPA/WPA2 Enterprise Mode OptionsEdit Region Settings Bonjour Advanced Setup WindowOption HTTP/HTTPS Dscp QoSEapol Window IP Filter WindowEAP-FAST Options Administration WindowsUsers Window, Maintenance Window, Firmware Window, User List Administrator Users Window Maintenance Window Passwords after saving the configuration file, be aware that Firmware Window Audio/Video WindowsVideo Window Video Window, Audio Window,PAL Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forMPEG-4 Settings Mjpeg Settings PAL/50 Hz Video AdjustmentDay/Night Vision OptionsAudio Window Duplex Talk and Listen Home Window Controls section onChoose Simplex Talk Only , Half Duplex Talk or Listen , or Full Duplex Talk and ListenProduct Process Window Security WindowsComplexity Window Initialization WindowUsers Window section on HttpMail & FTP Window Applications WindowsMail Setup Described in the Basic Setup Window section onPrimary Smtp Server Secondary Smtp ServerMail Body Motion Detection WindowPrimary FTP Secondary FTPEvent Window New Schedule Event ScheduleClear button Trigger EventAttachment Messages, see the Mail & FTP Window section onSnmp Window Alarm Input Settings Alarm I/O Ports WindowAlarm Output Settings Manual Control SettingsPTZ RS-485 Window Port SettingsPreset Position Patrol Sequence Preset Positions WindowZoom In button Zoom Out buttonFocus Near button Status WindowsFocus Far button More information, see the Basic Setup Window section on Information, see the Basic Setup Window section onSystem Window Audio/Video WindowWireless Audio SettingNetwork Window NetworkLocal Log Syslog & Log WindowLog List Sys Log ServerSystem log messages Message ExplanationAddress Address1 Port1 Address2 Port2 , User Smtp log messages Video Log WindowFTP log messages Delete All button Delete buttonOL-19273-02 Home Window Overview Viewing Video through the Home Window OverviewHome Window Control Description Home Window ControlsIP camera controls For related information, see the Video Window section onVideo display and audio controls Information, see the PTZ RS-485 Window section onEnabling audio, see the Audio Window section on SaveViewing Video through Third-Party Devices or Software Accessing the Primary MPEG-4 Stream by using VLC PlayerRtsp//ipaddress/img/media.sav Http//ipaddress/img/video.asfAccessing the Mjpeg Stream by using VLC Player Accessing the Secondary MPEG-4 Stream by using VLC PlayerRtsp//ipaddress/img/media2.sav Http//ipaddress/img/video2.asfCisco Video Surveillance 2500 Series IP Camera User Guide Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSMOL-19273-02 IN-1 D EIN-2 IN-3 EAP-FASTIN-4 HttpsIN-5 LEDSmtp IN-6 See PTZIN-7 PTZIN-8 IN-9 WEPIN-10
Related manuals
Manual 82 pages 45.48 Kb Manual 14 pages 34.66 Kb Manual 12 pages 10.86 Kb
Top Page Image Contents