Cisco Systems CIVS-IPC-2500, 2500 Series manual Message Explanation, System log messages

Chapter 3 Configuring and Managing the IP Camera

Status Windows

Table 3-26 Syslog and Log Information

Message Explanation

System log messages.

Note These messages appear if you enable the System Log option.

	Alert: Detected motion	Alert generated by the IP camera detecting motion
		in a configured video field.
	Alert: Input Port Port_Number triggered.	Alert generated by the indicated port changing
		state.
	Audio: Disable microphone.	Captures information when audio devices are
		enabled or disabled in the Audio window.
	Audio: Disable speaker.
	Audio: Enable microphone. (audio type: G.711
	A-Law)
	Audio: Enable microphone. (audio type: G.711
	u-Law)
	Audio: Enable microphone. (audio type: G.726)
	Audio: Enable speaker.
	DHCP: Lease release successfully.	Provides information about DHCP activities in
		networks that include DHCP.
	DHCP: Lease release unsuccessfully.
	DHCP: Lease renewal successfully.
	DHCP: Lease renewal unsuccessfully.
	DHCP: Timeout error when renewing DHCP
	lease.
	DST: Adjust DST Number hour automatically.	The IP camera has automatically adjusted its clock
		by the indicated number of hours for the beginning
		or end of daylight saving time.
	DST: DST begin.	The IP camera has adjusted its clock for the
		beginning of daylight saving time.
	DST: DST end.	The IP camera has adjusted its clock for the end of
		daylight saving time.
	LOG: Clear all messages.	You have used the Clear Log button to delete the
		log file from the IP camera SDRAM.
	LOG: Log file is full. Start to wrap around.	The IP camera SDRAM is full and existing log
		information is beginning to be overwritten.
	Network: Failed to get the IP address. Camera set	IP camera is unable to obtain an IP address
	to default IP address.	through DHCP and is set to the default IP address
		of 192.168.0.100.
	Network: LAN activated.	IP camera obtained a network IP address.
	Network: Wired link down.	Wired IP camera lost connection to the network.
	Network: Wired link up.	Wired IP camera established connection to the
		network.
	Network: Wireless activated.	Wireless IP camera successfully associated with
		an access point and obtained an IP address
	Cisco Video Surveillance 2500 Series IP Camera User Guide
OL-19273-02			3-43